Cisco TelePresence DX70 Gebrauchsanweisung

Email: [email protected]

Telephone: 01224 816 666

Cisco DX70: etting up for care home use v1.2

Your DX70 is able to connect to NHS Scotland’s video conference infrastructure through a standard

broadband connection. We reco end linking the unit to your router using a network cable to receive

the best connection however the unit can connect via wi-fi too. Please note,

the quality of signal you receive and therefore video quality can di inish

rapidly the further your syste is fro your wireless access point.

Please contact [email protected], supplying the unit's MAC address e.g.

1C6A7AE09V47 (found on the rear of the unit, by the base on a DX70 or

under the flap for a DX80) for a userna e and password. You will also be

sent a 4-digit PIN nu ber to be used to unlock the screen. These are

required for the initial stages of setup.

1. Attach the power pack to the unit and network cable between the unit and your router (if you intend

to use a wireless connection please note the SSID and passcode you will require) then power on.

2. If you are connected by network cable your first screen will ask you to sign in. If no network cable is

attached, because you intend using a wireless

connection, you will be asked to choose your network

and enter the wireless password. As soon as you tap

on the box asking for Service Do ain an onscreen

keyboard will appear.

The Service Do ain is vc.scot.nhs.uk. Add the

userna e and case-sensitive password supplied by

the NVCS support desk and tap Sign In.

3. You'll then be greeted with a Welco e screen. Please tap the Get tarted button.

4. Tap Don't Allow when asked about WebEx Meetings.

5. Tap kip (botto RHS of screen) when asked about Finding the right people with Jabber.

6. Tap kip when asked about voice ail.

7. Tap kip when asked about contacts and calendars.

8. Tap Continue when you reach a screen saying you are all signed in.

9. When asked for a PIN tap OK and on the following screen tap PIN, enter

the 4-digit PIN you received in your e ail fro [email protected] and tap

Continue. You'll be asked to enter the PIN a second ti e. Do so and tap OK.

10. Your syste will now link to our network, will be auto atically configured to work with our other

units and will download any necessary fir ware and software updates. Your syste is now ready to

ake and receive video calls. You will see your syste ’s na e and its dial-in nu ber at the botto

LHS of your screen.

11. Now, please set up the default ho e page on the browser to allow the collection of service

evaluation data fro the unit's users.

a. Tap the Apps button (six white dots) at the top right hand corner of the screen

then Tap the Browser icon.

b. Once open, navigate to

https://www.survey onkey.co.uk/r/TECVC

c. Tap the browser enu button in the top right hand

corner (three square dots) and select Settings (last

ite ).

d. Under the General section, tap Set ho epage.

e. Then Select Current page.

f. Exit the browser and test by opening it again.

Setup Troubleshooting

If you don’t see the initial Sign In screen:

You'll probably see the Welco e screen with the Get Started

button entioned in setup ite 3. Follow instructions 3

through 8 (and 9 if asked for a PIN). Your syste should

eventually look like the screenshot to the left.

At the top right-hand corner you’ll see 6 s all dots.

Tap the Dots to access the inbuilt settings and apps.

Tap the orange and white ettings icon

The first enu you see on the LHS of the screen is Wireless

and Networks. Tap More... then tap Reset Network Settings

fro the RHS enu. Make sure the s all tick box for “Enable

auto atic local telephone service directory” is empty and tap

Reset. Follow the setup instructions overleaf fro 3 again

Andere Handbücher für TelePresence DX70

Inhaltsverzeichnis

Andere Cisco Konferenzsystem Handbücher

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco TelePresence DX70 Service-Handbuch

Cisco

Cisco TelePresence IX5000 Bedienungsanleitung

Cisco

Cisco MX300 G2 Bedienungsanleitung

Cisco

Cisco Spark Room 55 Bedienungsanleitung

Cisco

Cisco MX200 G2 Service-Handbuch

Cisco

Cisco Quick Set C20 Montageanleitung

Cisco

Cisco Spark Room 70 Single Bedienungsanleitung

Cisco

Cisco Webex Room Kit Bedienungsanleitung

Cisco

Cisco TelePresence System Codec C90 Bedienungsanleitung

Cisco

Cisco MCU 5300 series Bedienungsanleitung

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco Room Kit EQ Bedienungsanleitung

Cisco

Cisco TelePresence MX300 Service-Handbuch

Cisco

Cisco 3545 MCU Installations- und Betriebshandbuch

Cisco

Cisco EX60 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Bedienungsanleitung

Cisco

Cisco DX600 series Bedienungsanleitung

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco Catalyst 3000 Bedienungsanleitung

Cisco

Cisco TelePresence MCU 4505 Bedienungsanleitung

Cisco

Cisco Webex Room Kit Plus Bedienungsanleitung

Cisco

Cisco EX90 Bedienungsanleitung

Cisco

Cisco TelePresence SX10 Service-Handbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung