Cisco MEREAKI MX65W Bedienungsanleitung

MX65W Installation Guide

This document describes how to install and set up the MX65W security

appliance. Additional reference documents are available online at:

www.meraki.com/library/products.

MX65W Overview

The Meraki MX65W is an enterprise security appliance designed for

distributed deployments that require remote administration. It is ideal for

network administrators who demand both ease of deployment and a

state-of-the-art feature set. This appliance provides the following new

features:

• USB port, to support approved 3G/4G cards for failover to cellular

networks.

• Support for eight LAN connections

• Support for two additional oE+ LAN ports

• Wall screws and anchors for mounting drywall surface, either

vertically or horizontally

ackage contents

In addition to the MX65W, the following are provided.

The MX65W front panel

Status Indicator

The MX65W uses an LED to inform the user of the device's status. LED patterns and their meanings are described

below.

LED Status Meaning

Solid orange ower is applied but the appliance is not connected to

the Meraki Dashboard

Alternating Colors The appliance is attempting to connect to Meraki

Dashboard

Flashing White Firmware upgrade in progress

Solid White Fully operational

The MX65W back panel

Additional functions on the back panel are described below, from left to right.

WAN / Internet ports These two ports provide connectivity to the WAN.

LAN ports

These 8 ports provide connectivity to computers,

printers, access points, or Ethernet switches.

A steady green LED indicates bidirectional connectivity,

and flashing green indicates traffic.

oE+ orts

These 2 LAN ports provide connectivity to computers,

printers, access points, or Ethernet switches.

Each port outputs up to 30W of oE power.

A steady green LED indicates bidirectional connectivity,

and flashing green indicates traffic.

ower input Designed for use only with the unit’s power supply.

The MX65W side panel

Additional functions on the back panel are described below, from left to right.

Reset button

Insert a paper clip if a reset is required.

• ress for 1 second to delete a downloaded

configuration and reboot.

• ress and hold for more than 10 seconds to force a

full factory reset.

USB port USB 2.0 for 3G/4G wireless cards. Traffic status is

indicated by the USB LED.

The MX65W bottom panel

lease note that the serial number is located on the product label at the bottom panel of MX65W

Mounting hardware

The supplied wall screws and anchors allow you to mount the appliance on a drywall surface, either vertically or

horizontally. The distance between the holes you drill should be 5-1/8 inches (13 cm).

• For mounting on drywall, use a ¼-in drill bit, then insert the plastic and screw assemblies.

• For mounting on wood or a similar surface, use only the screws.

• Allow the heads of the screws to stick out far enough to be inserted securely into the back of the appliance.

Connecting to WAN

All Meraki MX devices must have an I address. This section describes how to configure your local area network before

you deploy it. A local management web service, running on the appliance, is accessed through a browser running on a

client C. This web service is used for configuring and monitoring basic IS /WAN connectivity.

Setting up a static I address

Do the following to configure basic connectivity and other networking parameters:

1. Using a client machine such as a laptop, connect to one of the LAN ports of the MX.

2. Using a browser on the client machine, access the appliance's built-in web service by browsing to

http://setup.meraki.com. (You do not have to be connected to the Internet to reach this address)

3. Click Uplink configuration under the Local status tab. The default credentials use the device serial number as

the username, with a blank password field.

4. Choose Static for the IP Assignment option.

5. Enter the I address, subnet mask, default gateway I and DNS server information.

Setting up a DHC I address

By default all MX devices are configured to DHC from upstream WAN / IS servers. Simply plug the MX's WAN /

Internet port to your upstream circuit and wait a few minutes for the unit to negotiate a DHC address.

To ensure that the client C is redirected to the local web service in the following step, you must disable all

other network services (ex: wi-fi) on your client machine.

When the WAN connection is fully enabled, Internet LED 1 will turn green.

Additional settings

Setting VLANs

If your WAN uplink is on a trunk port, choose VLAN tagging > Use VLAN tagging and enter the appropriate value for

VLAN ID for your network.

Setting up secondary WAN interface (dual WAN)

The MX65W comes with two dedicated Internet ports, which are both configured through the Uplink configuration under

the Local status tab.

Setting PPPoE

oE authentication may be required if you are connecting MX device to a DSL circuit. You need to know your

authentication option and credentials (supplied by your IS ) in order to complete these steps.

• Choose Connection Type > PPPoE.

• Select your Authentication option.

• If you select Use authentication, enter appropriate values for Username and Password.

Web proxy settings

These settings take effect if the MX device has to fall back to using HTT to contact the Cloud Controller. By default,

web proxy is disabled. To enable web proxy, do the following:

• Choose Web proxy > Yes.

• Enter values as appropriate for Hostname or IP and Port.

• If you require authentication, choose Authentication > Use authentication, and enter appropriate values for

Username and Password.

Configuring physical link settings

To configure physical link settings on the Ethernet ports, click Local status > Ethernet configuration. You can enable

half duplex, full duplex, and autonegotiation, as well as set 10- or 100-Mbps data rates.

lease note that all these settings below are accessible only via the local management console.

To apply all configuration settings to the appliance, be sure to click Save Settings at the bottom of the page.

Inhaltsverzeichnis

Andere Cisco Firewall Handbücher

Cisco

Cisco LightStream 1010 Bedienungsanleitung

Cisco

Cisco Spam Bedienungsanleitung

Cisco

Cisco ASA 5506-X Kurzanleitung

Cisco

Cisco M190 Bedienungsanleitung

Cisco

Cisco Firepower 1100 Bedienungsanleitung

Cisco

Cisco 380 Series Handbuch

Cisco

Cisco ASA 5555-X Bedienungsanleitung

Cisco

Cisco Cisco ASA Series Bedienungsanleitung

Cisco

Cisco amp threat grid Bedienungsanleitung

Cisco

Cisco Firepower 1010 Handbuch

Cisco

Cisco Cisco ASA 5500 Series Bedienungsanleitung

Cisco

Cisco 5505 - ASA Firewall Edition Bundle Bedienungsanleitung

Cisco

Cisco PIX 501 Bedienungsanleitung

Cisco

Cisco Cisco ASA 5510 Bedienungsanleitung

Cisco

Cisco PIX 501 Bedienungsanleitung

Cisco

Cisco PIX 506E - Security Appliance Bedienungsanleitung

Cisco

Cisco ASA 5506-X Bedienungsanleitung

Cisco

Cisco Firepower 1600 Handbuch

Cisco

Cisco ASA 5506-X Bedienungsanleitung

Cisco

Cisco ASA 5512-X Handbuch

Cisco

Cisco Small Business RV215W Bedienungsanleitung

Cisco

Cisco LightStream 1010 Bedienungsanleitung

Cisco

Cisco Firepower 4100 Series Installations- und Betriebshandbuch

Cisco

Cisco Firepower 4100 Series Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

GTA

GTA GB-200 Bedienungsanleitung

Trend Micro

Trend Micro Deep Edge Bedienungsanleitung