Cisco 504 Gebrauchsanweisung
Service: 020 7503 3033 - email: horizon @ corporategroup.co.uk
Cisco 504 IP Phone
Quick User guide
Date:
1st October 2013
Produced by:
Robin Lea
Position:
Horizon SSE
0207 503 3033
horizon@corporategroup.co.uk
Contents
Your phone’s display and buttons.......................................................................... 3
Making calls ........................................................................................................................ 5
Redial ................................................................................................................................... 5
Speed Dials .......................................................................................................................... 5
Taking calls........................................................................................................................... 5
Accessing voicemail.............................................................................................................. 6
Main call handling features ..................................................................................... 7
Hold...................................................................................................................................... 7
Unattended Call Transfer...................................................................................................... 7
Attended Call Transfer.......................................................................................................... 7
Other call handling services .............................................................................................. 7
Your phone’s display and buttons
1) Handset - pick up to answer or make calls.
2) Message Waiting Indicator. When lit:
•Red - you have a new voice mail message.
•Flashing red - you have an incoming call.
3) Screen. Typically, this will display the:
•Date and time
•Phone station name
•Line extensions
•Softkey options
•Startup logo and screen saver.
4) Line keys. These indicate the status of the phone line:
•Green: Line is idle.
•Red (steady): Line is active or in use.
•Red (blinking): Line is on hold.
•Amber: Line is unregistered (cannot be used).
•Flashing Amber: The phone is not connected to the network.
5) Softkey buttons. Press to perform the action shown directly above it on the screen e.g.
Redial.
6) Navigation button. Press up or down to scroll through menu items on the screen.
7) Messages button. Press to access voicemail (once set up by the system administrator).
8) Hold button. Press to put a call on hold.
9) Set-up button. Reveals a menu from where you can configure features and preferences –
e.g directories, call history, set up functions such as call forwarding and phone status
information.
10) Mute button. Press to turn on or off. When the phone is on Mute, the button glows red. A
flashing red mute button indicates the phone has no network connection.
11) Volume button. Press + to increase or –to lower the volume level of the handset, headset
or speaker (when the phone is off-hook) or ringer (when the phone is on-hook).
12) Headset button. Press to turn on or off. When the headset is on, the button glows green.
13) Speaker button. Press to turn on or off. When the speaker is on, the button glows green.
14) Keypad. Press keys to dial phone numbers, enter letters, and choose menu items.
Making calls
There are three ways to make calls on the Cisco 504. You can:
lift the handset or
push the headset button or
push the speaker button.
When you hear the dial tone, enter your number and push Dial to call.
Note: You don’t need to dial 9 first to get an outside line.
Redial
To call a number you’ve called before, press the Redial soft key. Use your navigation button
to scroll to the number you want to dial.
Speed Dials
You should always set up and manage all speed dials through the Horizon Portal to make
sure they're not deleted every time you run a system upgrade or firmware refresh. To set up
speed dials, see your Horizon Portal guide.
Taking calls
You can answer a call on the Cisco 504 in three ways:
lift the handset or
push the headset button with the handset still on the phone or
push the speakerphone button with the handset still on-hook.
Taking more than one call
You can take up to three calls on your line, if you have Call Waiting activated –check with
your system administrator. You’ll know if there’s a second incoming call by:
the second line button flashing red or
the over-display light flashing red or
a single beep from the handset.
To switch to the second call –putting the first caller on hold:
Press the flashing red line button.
Press the button again to get back to the first caller.
Accessing voicemail
If you have voicemail, the red strip light above the display will light up. To get to your
messages:
•key in your Company Voice Portal number (usually 5999)
•then type in your Voice Portal passcode followed by #.
Main call handling features
Hold
Pushing the Hold softkey puts the caller on hold with music. To return to the original caller,
press the flashing red line button for that call.
Unattended Call Transfer - to simply transfer a call
•Press Transfer soft key + the extension.
When the person answers, press the Transfer soft key again and hang up.
Attended Call Transfer - to ask the person first to accept the
call
•Press Transfer soft key when a call is in progress. You’ll hear a secondary dial tone.
•Dial the number to which you want to transfer the call.
•When the person answers, ask whether they want to take the call.
•If yes, press the Transfer soft key and hang up.
•If no, press the Transfer soft key to return to the original caller.
Call Transfer to Voicemail
Press Transfer soft key when a call is in progress. You’ll hear a secondary dial tone.
Dial the *55 followed by the Dial soft key then either….
Press # and hang up to transfer to your voicemail.
Or
Dial the ext/mailbox number of a colleague then hang up
To cancel the process press the * key
Other call handling services
To set up facilities like Call Pickup, Call Forward, Hunt Groups or Conferencing, ask your
system administrator.
Andere Handbücher für 504
3
Inhaltsverzeichnis
Andere Cisco IP-Telefon Handbücher
Cisco
Cisco 3905 Bedienungsanleitung
Cisco
Cisco 7936 - IP Conference Station VoIP Phone Bedienungsanleitung
Cisco
Cisco 6945 Series Bedienungsanleitung
Cisco
Cisco Cisco 7940 Bedienungsanleitung
Cisco
Cisco UNIFIED 9971 Bedienungsanleitung
Cisco
Cisco 7945G - Unified IP Phone VoIP Bedienungsanleitung
Cisco
Cisco CP-7961G Bedienungsanleitung
Cisco
Cisco 8811 Bedienungsanleitung
Cisco
Cisco 6825 Bedienungsanleitung
Cisco
Cisco Linksys One PHB1100 Bedienungsanleitung
Cisco
Cisco 8841 Bedienungsanleitung
Cisco
Cisco 8811 Bedienungsanleitung
Cisco
Cisco SPA50X Bedienungsanleitung
Cisco
Cisco 7912 Bedienerhandbuch
Cisco
Cisco 7925G-EX Bedienungsanleitung
Cisco
Cisco Small Business SPA 301 Bedienungsanleitung
Cisco
Cisco 7940G Bedienungsanleitung
Cisco
Cisco 7920 Series Bedienungsanleitung
Cisco
Cisco Cisco 7960 Bedienungsanleitung
Cisco
Cisco CP-7941G-RF Bedienungsanleitung
