Cisco 8831 Betriebsanleitung

Features of your Cisco Unified IP Phone

The Cisco Unified IP Conference Phone 8831 is a full-featured single line conference station that provides

voice communication over an IP network. It functions much like a digital business phone, allowing you to

place and receive calls and to access features such as mute, hold, transfer, speed dial, call forward, and more.

In addition, because conference stations connect to your data network, they offer enhanced IP telephony

features, including access to network information and services, and customizable features and services.

The conference station provides a backlit LCD screen, support for up to ten speed-dial numbers, and a variety

of other sophisticated functions. Optional microphone extension kits provide enhanced room coverage that

can be further expanded by linking two units together.

In addition to basic call-handling features, your conference station can provide enhanced productivity features

that extend your call-handling capabilities. Depending on configuration, the conference station supports:

•Access to network data, XML applications, and web-based services.

•Online customizing of conference station features and services from your User Options web pages.

•Buttons and hardware, page 1

•Phone screen, page 8

•Phone connections, page 10

•General IP Phone information, page 14

•Feature availability, page 15

Buttons and hardware

The Conference Phone has two primary components:

•Display Control Unit (DCU)

•Sound Base

In addition, the following optional extension kits can be added to or used with the conference phone:

•Wired Microphone Extension Kit

•Wireless Microphone Extension Kit and Charger

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

For your conference phone to work, it must be connected to the corporate IP telephony network.

Display Control Unit

The Display Control Unit (DCU) is tethered to the Sound Base via a micro USB connector.

You can use the graphic and table below to identify buttons and hardware on the DCU.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Display Control Unit

Table 1: Display Control Unit buttons and softkeys

DescriptionItem

LCD screen that displays conference phone menus and features.Phone screen1

Four programmable keys.Softkeys2

2-way navigation bar and Select key that allows you scroll menus

and select items on the display.

Navigator with Select

key

LED backlit call button.

Press this key to:

•Go Off Hook

•Answer an incoming call

•Obtain a dial tone to initiate a call

•Resume a call

•Release a call

Call button4

Allows you to dial phone numbers and enter letters.Keypad5

Toggles the Mute feature. A red back light indicates a call is on

mute.

Mute button6

2-way rocker switch that raises the volume of the speaker.Volume rocker7

For details on DCU LED behavior, see LED state definitions.Note

Sound Base

The Sound Base provides 360 degree audio coverage via four built-in microphones and supports a full duplex

speaker phone.

To provide enhanced room coverage, two sound base units can be linked together.

You can use the graphic and table below to identify buttons and connections on the Sound Base.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Sound Base

Table 2: Sound Base buttons

DescriptionItem

Three LED indicators provide call status information. For

details on LED behaviour, see LED state definitions.

LED indicators1, 2, 3

Backlit mute button.Mute button4

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Sound Base

Wireless extension microphone and charger kit

The optional wireless extension microphone and charger kit unit contains two omni-directional wireless

microphones, a charger unit and two country specific AC power clip adaptors for powering the charger unit.

Connecting a microphone kit enhances the room coverage of the conference station.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Wireless extension microphone and charger kit

Table 3: Wireless microphone and charger buttons and features

DescriptionItem

Omni-directional wireless microphones1

LED charge status indicator2

Charger tray3

Mute button4

Battery compartment5

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Wireless extension microphone and charger kit

DescriptionItem

Charging contacts6

Please see the FCC ID approval number under the Battery Cover for CP-MIC-WRLS-S-US= Wireless

Microphone. FCC ID: LDKMICWR0776

Note

Please see the Canada IC approval number under the Battery Cover for the CP-MIC-WRLS-S-US=

Wireless Microphone. IC: 2461B-MICWR0776

Note

Wired extension microphone kit

The optional wired extension microphone kit includes two wired omni-directional microphones. Connecting

a microphone kit enhances the room coverage of the conference phone. The sound base has two wired

microphone ports and you can connect one or both wired microphones.

If the conference phone is connected to another sound base in Linked Mode, the primary base station supports

one or two wireless microphones, or it supports one wired microphone. The secondary unit supports only one

wired microphone; a wireless microphone cannot be connected to a secondary Sound Base. You cannot mix

microphone kits: if you plan to connect a microphone to both sound bases, they must both be wired microphones.

Wired and wireless microphones cannot be used at the same time, and the wireless microphones have a

higher priority. Attempting to connect a wired microphone to a conference phone that has paired or

connected channels results in a warning to the user that the wired microphone is disabled. To solve this

problem, unpair any paired or connected wireless microphones before connecting a wired microphone.

Note

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Wired extension microphone kit

Table 4: Wired microphone buttons

DescriptionItem

Mute button.1

Phone screen

The LCD screen of the phone is located on the DCU. The idle or home screen displays information about the

status of calls and features.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Phone screen

If the conference phone is in an offline state, the idle screen displays the message Phone is not

registered and the Apps softkey remains available.

You can use the graphic and table below to identify the features and functions available on the screen.

Table 5: Phone screen layout.

DescriptionItem

Displays date, time, and current directory number.

Displays menu name when applicable.

Header1

Displays line label, call details, and status messages

such as missed calls, message waiting, and line

forwarding information.

Line details and other phone

information

Indicates the status of a call, such as ringing, hold,

encrypted or connected call.

Call State icon3

Displays softkeys for currently available features or

actions.

Softkey labels4

These icons are displayed when an associated

feature, such as extension microphones (5) or Link

mode (6) is connected.

Feature icons5, 6

Phone screen icons

Table 6: Phone screen icons

DescriptionIcon

On hook

Off hook

Ringing in

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Phone screen

DescriptionIcon

Connected

Hold

Shared line

Microphone connected

Linked mode

Encrypted

Phone screen cleaning

Use only a soft, dry cloth to wipe your conference station display screen. Do not use any liquids or powders

on the phone, as they can contaminate phone components and cause failures.

Caution

Phone connections

Network and power are connected to the phone from the Sound Base. The mini-USB connection for the DCU,

the wired microphone ports and the daisy chain port for the Linked Mode feature are also located on the base.

You can use the graphic and table below to identify connections and ports on the Sound Base.

Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.3

Features of your Cisco Unified IP Phone

Phone screen cleaning

Andere Handbücher für 8831

Inhaltsverzeichnis

Andere Cisco IP-Telefon Handbücher

Cisco

Cisco Cisco 7940 Bedienungsanleitung

Cisco

Cisco 8851 Bedienungsanleitung

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7841 Produktinformationsblatt

Cisco

Cisco Unified 7900 Series Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 6800 Series Bedienungsanleitung

Cisco

Cisco 6941 - Unified IP Phone Slimline VoIP Bedienungsanleitung

Cisco

Cisco 7925G - Unified Wireless IP Phone VoIP Bedienungsanleitung

Cisco

Cisco 7965 Einrichtungshandbuch

Cisco

Cisco VoIP 8961 Bedienungsanleitung

Cisco

Cisco 524SG - Unified IP Phone VoIP Bedienungsanleitung

Cisco

Cisco Cisco 7940 Bedienungsanleitung

Cisco

Cisco 8811 Bedienungsanleitung

Cisco

Cisco MCS 7800 Series Bedienungsanleitung

Cisco

Cisco 8800 Series Leitfaden

Cisco

Cisco Small Business Pro SPA 504G Gebrauchsanweisung

Cisco

Cisco Cisco 7940 Bedienungsanleitung

Cisco

Cisco 6945 Series Bedienungsanleitung

Cisco

Cisco WIP310 - iPhone Wireless VoIP Phone Bedienungsanleitung

Cisco

Cisco 7821 Bedienungsanleitung

Cisco

Cisco 8800 Series Bedienungsanleitung

Cisco

Cisco 7832 Bedienungsanleitung

Cisco

Cisco SPA 303 Series Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung