Cisco LINKSYS AM200 Original Betriebsanleitung

Model No.

Quick Installation

Model No.

WIRED

ADSL Modem

Package Contents

•ADSLModem

• Power Supply

• User Guide on CD-ROM

• Telephone Cable

• Ethernet Cable

1Connecting the ADSL Modem

NOTE: Make sure you only place

the microfilter or splitter between

the telephone and wall jack and not

between the Modem and wall jack.

Contact your Internet Service

Provider for additional details.

Connecting the Modem

You can use the Setup CD-ROM or

this Quick Install to install the

modem. The Setup program is

available to Windows 2000 & XP

users only.

AConnect one end of the

provided phone cable to

the DSL (RJ-11) port that is

on the back of your Modem

(Figure A). Connect the

other end of the phone

cable to the wall jack with

DSL service.

BConnect one end of the

provided Ethernet cable to

your PC’s Ethernet port

(Figure B). Connect the

other end of the cable to

the Ethernet port on the

back of your Modem.

CConnect the power

adapter to your Modem

(Figure C) and to the

electrical outlet.

DTurn on your PC.

The connection of the Modem is

complete.

For Step 2, you will need the

setup information provided by

your ADSL Internet Service

Provider (ISP). If you do not

have this information, please

contact them before

proceeding.

AOpen your web browser.

(You may get an error

message at this point.

Continue following these

directions.) Enter

http://192.168.1.1 in the

web browser’s

Address

field. Press the Enter key.

BA Login window, shown in

Figure B, will appear.

Enter admin in lowercase

letters in the

User Name

field, and enter admin in

lowercase letters in the

Password

field (admin is

the default user name

and password.) Click the

CThe

Basic Setup

screen

will appear with the Setup

tab selected. Based on

the setup instructions

from your ISP, you may

AM200 (EU/LA)

need to provide the

following information.

ADSL Settings. The

Modem supports the

following Encapsulations:

RFC 1483 Bridged, RFC

1483 Routed, RFC 2516

PPPoE, RFC 2364 PPPoA

and Bridged Mode Only.

Each

Basic Setup

screen

and available features

will differ depending on

what type of

encapsulation you select.

VC Settings. Virtual

Circuits (VPI and VCI):

These fields consist of two

items: VPI (Virtual Path

Identifier) and VCI (Virtual

Channel Identifier). Your

ISP will provide the

correct settings for these

fields. Multiplexing: Select

LLC or VC, depending on

your ISP.

Your ISP will provide the

correct settings.

2Configuring the ADSL Modem

NOTE: If your PC’s Ethernet

adapter is not set up, refer to the

Ethernet adapter’s user guide for

more information.

NOTE: You only need to configure

the Modem once.

bSelect Use the following

IP Address as the IP

Setting.

cEnter the IP Address and

the Subnet Mask.

dEnter the Default

Gateway address.

eEnter the DNS in the

Primary

and/or

Secondary

fields. You

need to enter at least

one DNS address.

fClick the Save Settings

button to save the

settings.

2. RFC 1483 Routed

If your ISP says that you are

connecting through RFC 1483

Routed using a static IP

address, perform these steps:

aSelect RFC 1483 Routed

for the Encapsulation.

bEnter the IP Address and

the Subnet Mask.

cEnter the Default

Gateway address.

dEnter the DNS in the

Primary

and/or

Secondary

fields. You

need to enter at least

one DNS address.

eClck the Save Settings

button to save the

settings.

3. RFC 2516 PPPoE or RFC

2364 PPPoA

If your ISP says that you are

connecting through PPPoE or

PPPoA, or if you normally enter

a user name and password to

access the Internet, perform

these steps:

aSelect RFC2516 PPPoE or

RFC 2364 PPPoA as

appropriate for the

Encapsulation.

bIf you selected PPPoE,

enter the Service Name

(if required).

cEnter the User Name (if

required).

dEnter the Password.

eSelect Keep Alive if you

always want to be AM200 EU/LA-QI-60523NC DF

Only one of the following

encapsulations is required. Your

Internet Service Provider will tell

you which one to use.

1. RFC 1483 Bridged

Dynamic IP Address

If your ISP says that you are

connecting through a

dynamic IP address, perform

these steps:

aSelect RFC 1483 Bridged

for the Encapsulation.

bSelect Obtain an IP

Address Automatically as

the IP Setting.

cClick the Save Settings

button to save the

settings.

Static IP Address

If your ISP says that you are

connecting through a static or

fixed IP address, perform these

steps:

aSelect RFC 1483 Bridged

for the Encapsulation.

Static IP Address

connected to your ISP, or

select Connect on

Demand if you are

charged for the time that

you are connected to

your ISP.

fClick the Save Settings

button.

DCongratulations! You’ve

successfully configured

the Modem. Test the

setup by opening your

web browser from your

computer and entering:

http://www.linksys.com/registration

If you are unable to reach our

website, you may want to review

the installation and configuration

sections in this Quick Installation or

refer to the Troubleshooting

section of the User Guide.

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Dynamic IP Address

RFC 1483 Routed

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM.

You can also e-mail for further support.

Website

http://www.linksys.com/international

Product Registration

http://www.linksys.com/registration

PPPoA

PPPoE

Inhaltsverzeichnis

Andere Cisco Modem Handbücher

Cisco

Cisco BWX360 WiMAX Bedienungsanleitung

Cisco

Cisco DPQ2202 Bedienungsanleitung

Cisco

Cisco DPH153 Bedienungsanleitung

Cisco

Cisco MX450 Bedienungsanleitung

Cisco

Cisco DPC2505 Bedienungsanleitung

Cisco

Cisco DPC3000 Bedienungsanleitung

Cisco

Cisco WCM300 - Channel Bonded Cable Modem Bedienungsanleitung

Cisco

Cisco 3848 Bedienungsanleitung

Cisco

Cisco DPC3208 Bedienungsanleitung

Cisco

Cisco EPC3208G EuroDOCSIS 3.0 8x4 Bedienungsanleitung

Cisco

Cisco WebSTAR DPX100 Bedienungsanleitung

Cisco

Cisco Linksys E800 Bedienungsanleitung

Cisco

Cisco LINKSYS ADSL2MUE Bedienungsanleitung

Cisco

Cisco BWX 120 Bedienungsanleitung

Cisco

Cisco 3G MicroCell Bedienungsanleitung

Cisco

Cisco DPC2203 Bedienungsanleitung

Cisco

Cisco Linksys DPC3008 Bedienungsanleitung

Cisco

Cisco DPC3000 Bedienungsanleitung

Cisco

Cisco uBR904 Bedienungsanleitung

Cisco

Cisco DPC2607 Bedienungsanleitung

Cisco

Cisco WAP300N Bedienungsanleitung

Cisco

Cisco DPC2100 Bedienungsanleitung

Cisco

Cisco SE680 WiMAX Bedienungsanleitung

Cisco

Cisco MX250 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung