Cisco 15310-CL Bedienungsanleitung
xxiii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
This section explains the objectives, intended audience, and organization of this publication and
describes the conventions that convey instructions and other information.
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This section provides the following information:
•Revision History
•Document Objectives
•Audience
•Related Documentation
•Document Conventions
•Obtaining Optical Networking Information
•Obtaining Documentation and Submitting a Service Request
Revision History
Date Notes
March 2007 Added this Revision History Table
April 2007 Added server trail information in the Virtual Concatenated Circuits section in
Chapter 8
June 2007 Updated About this Manual chapter
August 2007 Updated Table 6-2 with VLAN DB Profile information for all users
September 2007 Added a new rule for creation of protection groups under section 1:1 Electrical
Card Protection in the Card Protection chapter.
October 2007 Updated the default value for CTX.DS3-PORT.config.
FeInhibitLpbk in the Network Element Defaults chapter.
xxiv
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Document Objectives
The Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual provides hardware and software
reference information for Cisco ONS 15310 nodes and networks. Use this manual in conjunction with
the appropriate publications listed in the Related Documentation section.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware
and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and
preferably have experience as a telecommunications technician.
Related Documentation
Use the Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual in conjunction with the
following referenced publications:
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide
Provides installation, turn up, test, and maintenance procedures.
April 2008 •Updated alarm information in Chapter 11, Alarm Monitoring and
Management, section, External Alarms and Controls.
•Added a note about Craft ports in section Electrical Interface Assemblies of
Chapter 2, Cisco ONS 15310-MA Shelf Assembly Hardware and section
CTX2500 Card of Chapter 3, Card Reference.
October 2008 •Updated the caution in section 2.6.2 Fiber Cable Installation.
•Added a note in Card Default Settings and Node Default Settings section of
Appendix C, Network Element Defaults.
•Added a note in Table A-8, Single-Mode Fiber SFP Port Cabling
Specifications—ONS 15310-MA Only of Appendix A, Specifications.
November 2008 Updated the section “Server Trail” in the chapter “Circuits and Tunnels”.
March 2009 Updated the section “External Alarms and Controls” in the chapter “Alarm
Monitoring and Management”.
December 2009 Updated the figure “ACS Cable T015654” in the chapter “Cisco ONS 15310-MA
Shelf Assembly Hardware”.
April 2010 Updated the section “SNMP Overview” in the chapter “SNMP”.
July 2010 Updated the section “CE-100T-8 and ML-100T-8 Cards” in the appendix
“Specifications”.
July 2011 Added a note in the “PC and UNIX Workstation Requirements” section of
Chapter, “Cisco Transport Controller Operation”.
Date Notes
xxv
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide
Provides alarm descriptions and troubleshooting procedures, general troubleshooting procedures,
error messages, performance monitoring parameters, and SNMP information.
•Cisco ONS SONET TL1 Command Guide
Provides a full TL1 command and autonomous message set including parameters, AIDs, conditions
and modifiers for the Cisco ONS 15454, ONS 15600, ONS 15310-CL, and
Cisco ONS 15310-MA systems.
•Cisco ONS SONET TL1 Reference Guide
Provides general information, procedures, and errors for TL1 in the Cisco ONS 15454, ONS 15600,
ONS 15310-CL, and Cisco ONS 15310-MA systems.
•Cisco ONS 15310-CL and Cisco ONS 15310-MA Ethernet Card Software Feature and Configuration
Guide
Provides software feature and operation information for Ethernet cards in the Cisco ONS 15310-CL
and Cisco ONS 15310-MA.
•Release Notes for the Cisco ONS 15310-CL Release 8.0
Provides caveats, closed issues, and new features and functionality information.
•Release Notes for the Cisco ONS 15310-MA Release 8.0
Provides caveats, closed issues, and new features and functionality information.
For an update on End-of-Life and End-of-Sale notices, refer to
http://www.cisco.com/en/US/products/hw/optical/ps2001/prod_eol_notices_list.html.
Document Conventions
This publication uses the following conventions:
Convention Application
boldface Commands and keywords in body text.
italic Command input that is supplied by the user.
[ ] Keywords or arguments that appear within square brackets are optional.
{ x | x | x } A choice of keywords (represented by x) appears in braces separated by
vertical bars. The user must select one.
Ctrl The control key. For example, where Ctrl + D is written, hold down the
Control key while pressing the D key.
screen font Examples of information displayed on the screen.
boldface screen font Examples of information that the user must enter.
< > Command parameters that must be replaced by module-specific codes.
xxvi
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the
document.
Caution Means reader be careful. In this situation, the user might do something that could result in equipment
damage or loss of data.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this
device.
Statement 1071
SAVE THESE INSTRUCTIONS
Waarschuwing
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de
waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt
raadplegen.
BEWAAR DEZE INSTRUCTIES
Varoitus
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin
käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu
onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen
mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien
lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
Attention
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant
entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez
conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des
avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,
référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
xxvii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Warnung
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen
kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und
den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder
Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten
Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
Avvertenza
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti.
Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le
traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
Advarsel
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du
begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med
elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten
av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne
enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de
lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos
perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de
prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para
localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
¡Advertencia!
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el
número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña
a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
xxviii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Varning!
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av
varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna
anordning.
SPARA DESSA ANVISNINGAR
xxix
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões
corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os
circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o
número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de
segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
Advarsel
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for
legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de
involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til
undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de
oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER
xxx
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
xxxi
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Obtaining Optical Networking Information
This section contains information that is specific to optical networking products. For information that
pertains to all of Cisco, refer to the Obtaining Documentation and Submitting a Service Request section.
Where to Find Safety and Warning Information
For safety and warning information, refer to the Cisco Optical Transport Products Safety and
Compliance Information document that accompanied the product. This publication describes the
international agency compliance and safety information for the Cisco ONS 15310 system. It also
includes translations of the safety warnings that appear in the ONS 15310 system documentation.
Cisco Optical Networking Product Documentation CD-ROM
Optical networking-related documentation, including Cisco ONS 15xxx product documentation, is
available in a CD-ROM package that ships with your product. The Optical Networking Product
Documentation CD-ROM is updated periodically and may be more current than printed documentation.
xxxii
Cisco ONS 15310-CL and Cisco ONS 15310-MA Reference Manual, R8.0
78-17714-01
About this Manual
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS)
feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds
are a free service and Cisco currently supports RSS version 2.0.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Cisco Netzwerk-Router Handbücher
Cisco
Cisco ASR 9901 Handbuch
Cisco
Cisco ASR 5000 Series Bedienungsanleitung
Cisco
Cisco 860 Series Handbuch
Cisco
Cisco NCS 5700 Bedienungsanleitung
Cisco
Cisco RV130W Installations- und Betriebshandbuch
Cisco
Cisco XR 12000 Bedienungsanleitung
Cisco
Cisco 7000 and 7507 Chassis CHAS-7507 Leitfaden
Cisco
Cisco 800 Series Anleitung zur Verwendung
Cisco
Cisco Unified Communications Manager 8.5(1) Bedienungsanleitung
Cisco
Cisco 6000 series Technisches Handbuch
Cisco
Cisco 7246 - uBR Router Bedienungsanleitung
Cisco
Cisco 4000 Series Bedienungsanleitung
Cisco
Cisco 1841 - 3G Bundle Router Bedienungsanleitung
Cisco
Cisco 910 Bedienungsanleitung
Cisco
Cisco 7600 Series Montageanleitung
Cisco
Cisco CRS Bedienungsanleitung
Cisco
Cisco RV345 Bedienungsanleitung
Cisco
Cisco 1100 Series Bedienungsanleitung
Cisco
Cisco ASR 1000 Series Bedienungsanleitung
Cisco
Cisco 7600 Series Handbuch
