Cisco 1700 series Installationsanleitung

CHAPTER

Cisco 1700 Router Overview 1-1

Cisco 1700 Router Overview

This chapter introduces the Cisco 1700 router, also referred to in this guide as the router,

and covers the following topics:

•Key Features

•Rear-Panel Ports and LEDs

•Front-Panel LEDs

•Router Memory

•Unpacking the Router

•Additional Required Equipment

Key Features

Cisco 1700 Router Hardware Installation Guide

1-2

Figure 1-1 Cisco 1700 Router

Key Features

The Cisco 1700 router is a small, modular desktop router that links small- to medium-size

remote Ethernet and FastEthernet LANs over one to four WAN connections to regional and

central ofﬁces. Table 1-1 lists the router key features.

PWR ACT

ACT/CH0

ACT/CH1

ACT/CH0

WIC0 WIC1 ETH

ACT/CH1 COL

Cisco

1700

SERIES

ROUTER

12154

Cisco 1700 Router Overview 1-3

Key Features

Table 1-1 Key Features

Feature Description

One FastEthernet (10/100BaseTX) port • Operates in full- or half-duplex mode (with manual override

available).

• Supports autosensing for 10- or 100-Mbps operation.

Two Cisco WAN interface card slots • Supports a combination of any two of the following WAN interface

cards: ISDN BRI, 56-kbps DSU/CSU, FT1/T1 DSU/CSU, high-speed

serial, and dual-serial.

• The WAN interface conﬁguration can be changed as your network

requirements change.

Console port Supports router conﬁguration and management with a

directly-connected terminal or PC. Supports up to 115.2 kbps.

Auxiliary port Supports modem connection to the router, which can be conﬁgured and

managed from a remote location. Supports up to 115.2 kbps.

SNMP support Router can be managed over a network using Simple Network

Management Protocol (SNMP).

AutoInstall support Conﬁguration ﬁles can be easily downloaded to the router over a WAN

connection.

Kensington security slot Router can be secured to a desktop or other surface using Kensington

lockdown equipment.

Cisco ConﬁgMaker support You can set up networks that include the Cisco 1700 router using the

Cisco ConﬁgMaker application, a wizards-based software tool that helps

you easily conﬁgure and address Cisco routers, access servers, hubs,

switches, and networks.

Compatible with Cisco Networked

Ofﬁce stack Can be stacked and operated with other members of the

Cisco Networked Ofﬁce stack product line.

Support for Cisco IOS software features Supports IP, IPX, AppleTalk, IBM, Open Shortest Path First (OSPF),

NetWare Link Services Protocol (NLSP), Resource Reservation Protocol

(RSVP), encryption, network address translation, and the Cisco IOS

Firewall Feature Set.

Rear-Panel Ports and LEDs

Cisco 1700 Router Hardware Installation Guide

1-4

Rear-Panel Ports and LEDs

This section describes the router rear panel ports and LEDs, which are shown in Figure 1-2

and described in Table 1-2 and Table 1-3.

Figure 1-2 Rear-Panel Ports and LEDs

Table 1-2 Rear-Panel Connectors

Connector/Slot Label/Color Description

Ethernet port 10/100

ETHERNET

(yellow)

Connects the router to the local Ethernet network through this

port. This port autosenses the speed (10 Mbps or 100 Mbps) and

duplex mode (full- or half-) of the device to which it is connected

and then operates at the same speed and in the same duplex

mode.

Auxiliary port AUX

(black) Connects to a modem for remote conﬁguration with Cisco IOS

software.

Console port CONSOLE

(blue) Connects to a terminal or PC for local conﬁguration using

Cisco IOS software.

WAN interface card slot

(WICØ) No label Supports one Cisco WAN interface card. For detailed

information, refer to the Cisco WAN Interface Cards Hardware

Installation Guide that comes with every card.

Power

socket

+5, +12, -12 VDC

CONSOLE

10/100 ETHERNET AUX

FDX LNK100WIC0OK WIC1OK

Power switch

Cisco 1720

12156

FDX/100/LNK LEDs Auxiliary port

Kensington-compatible

locking socket

WIC 0

OK LED 10/100-Mbps

Ethernet port WIC 1

OK LED

WIC 0 slot WIC 1 slot

Console port

SEE MANUAL BEFORE INSTALLATION

DSU

56K

Cisco 1700 Router Overview 1-5

Rear-Panel Ports and LEDs

Use the rear-panel LEDs during router installation to conﬁrm that you have correctly

connected all cables to the router.

Table 1-3 Rear-Panel LEDs

WAN interface card slot

(WIC1) No label Supports one Cisco WAN interface card. For detailed

information, refer to the Cisco WAN Interface Cards Hardware

Installation Guide that comes with every card.

Power socket +5, +12, -12 VDC Connects the router to the external power supply.

LED Label Color Description

WICØ OK Green On when a WAN interface card is correctly inserted in the card slot.

FDX Green On solid—Ethernet port is operating in full-duplex mode.

Off—Ethernet port is operating in half-duplex mode.

100 Green On solid—Ethernet port is operating at 100 Mbps.

Off—Ethernet port is operating at 10 Mbps.

LNK Green On when the Ethernet link is up.

WIC1 OK Green On when a WAN interface card is correctly inserted in the card slot.

Table 1-2 Rear-Panel Connectors (Continued)

Connector/Slot Label/Color Description

Front-Panel LEDs

Cisco 1700 Router Hardware Installation Guide

1-6

Front-Panel LEDs

Use the router front-panel LEDs to determine network activity and status on the Ethernet

port and on the WAN interface card ports. The front-panel LEDs are illustrated in

Figure 1-3 and described in Table 1-4.

Figure 1-3 Front-Panel LEDs

Table 1-4 Front-Panel LEDs

LED Label Color Description

PWR Green On means that DC power is being supplied to the router.

OK Green On means that the router has successfully booted up and the software is functional.

This LED blinks during the power-on self-test (POST).

Refer to Table 3-1 in the “Troubleshooting” chapter for information on how to use

this LED for router diagnostics.

ETH

ACT Green Blinks when there is network activity on the Ethernet port.

COL Yellow Blinks when there are packet collisions on the local Ethernet network.

12155

PWR ACT

ACT/CH0

ACT/CH1

ACT/CH0

WIC0 WIC1 ETH

ACT/CH1 COL

Cisco 1700 Router Overview 1-7

Front-Panel LEDs

WICØ

ACT/CHØ Green Serial and DSU/CSU cards—Blinks when data is being sent to or received from

the port on the card in the WICØ slot.

ISDN cards—On solid when the ﬁrst ISDN B channel is up for the card in the

WICØ slot.

2-port serial cards—Blinks when there is data being sent to or received from the

ﬁrst port on the 2-port card in the WICØ slot.

ACT/CH1 Green Serial and CSU/DSU cards—Remains off.

ISDN cards—On solid when the second ISDN B channel is up for the card in the

WICØ slot

2-port serial cards—Blinks when there is data being sent to or received from the

second port on the 2-port card in the WICØ slot.

WIC1

ACT/CHØ Green Serial and DSU/CSU cards—Blinks when data is being sent to or received from

the port on the card in the WIC1 slot.

ISDN cards—On solid when the ﬁrst ISDN B channel is up for the card in the

WIC1 slot.

2-port serial cards—Blinks when there is data being sent to or received from the

ﬁrst port on the 2-port card in the WIC1 slot.

ACT/CH1 Green Serial and DSU/CSU cards—Remains off.

ISDN cards—On solid when the second ISDN B channel is up for the card in the

WIC1 slot.

2-port serial cards—Blinks when there is data being sent to or received from the

second port on the 2-port card in the WIC1 slot.

Table 1-4 Front-Panel LEDs (Continued)

LED Label Color Description

Router Memory

Cisco 1700 Router Hardware Installation Guide

1-8

Router Memory

This section describes the types of memory stored in the router and how to ﬁnd out how

much of each type of memory is stored in the router.

For instruction on how to upgrade memory in the router, refer to the “Installing and

Upgrading Router Memory” appendix later in this guide.

Types of Memory

The Cisco 1700 router has the following types of memory:

•Dynamic random-access memory (DRAM)—This is the main storage memory for the

router. DRAM is also called working storage and contains the dynamic conﬁguration

information. The Cisco 1700 router stores a working copy of Cisco IOS software,

dynamic conﬁguration information, and routing table information in DRAM.

•Nonvolatile random-access memory (NVRAM)—This type of memory contains a

backup copy of your conﬁguration. If the power is lost or the router is turned off, this

backup copy enables the router to return to operation without reconﬁguration.

•Flash memory—This special kind of erasable, programmable memory contains a copy

of the Cisco IOS software. The Flash memory structure can store multiple copies of the

Cisco IOS software. You can load a new level of the operating system in every router in

your network and then, when convenient, upgrade the whole network to the new level.

The Flash memory on the Cisco 1700 router is stored on mini-Flash modules.

Cisco 1700 Router Overview 1-9

Amounts of Memory

Use the show version command to view the amount of DRAM, NVRAM, and Flash

memory stored in your router. The following example of the show version command

output in bold text displays the amount of memory stored in this router.

1700# show version

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-Y-M), Version 12.X(XX)T

[cisco-ferrari2 121]

Compiled Tue 26-May-98 19:58 by . . .

cisco 1700 (MPC860) processor (revision 0x00) with 12288K/4096K bytes of

memory.

Processor board ID 0000 (1314672220), with hardware revision 0000

M860 processor: part number 0, mask 32

Bridging software.

X.25 software, Version 3.0.0.

1 Serial network interface(s)

32K bytes of non-volatile configuration memory.

4096K bytes of processor board System flash (Read/Write)

Configuration register is 0x0

Unpacking the Router

Cisco 1700 Router Hardware Installation Guide

1-10

Unpacking the Router

Figure 1-4 shows the items that come with your router. All of these are in the accessory kit

that is inside the box that your router came in.

Figure 1-4 Router Box Contents

Power cord (black) Modem cable adapter

(gray, DB-25-to-DB-9)

Software

Configuration

Guide

Product documentation

12015

Hardware

Installation

Guide

Documentation

CD-ROM

Cisco 1700 router

Power supply

PWR

OK ACT/CH0 ACT/CH1

ACT

COL

ACT/CH0 ACT/CH1 ETH

WIC0 WIC1

MODEM

Console cable

(light blue, RJ-45-to-DB-9)

Andere Handbücher für 1700 series

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco GRS Bedienungsanleitung

Cisco

Cisco 1841 - 3G Bundle Router Bedienungsanleitung

Cisco

Cisco 1921-T1SEC/K9 Bedienungsanleitung

Cisco

Cisco WRT54G2 Linksys Bedienungsanleitung

Cisco

Cisco 2600 Series Bedienungsanleitung

Cisco

Cisco 10000-2P2-2DC Bedienungsanleitung

Cisco

Cisco ASR-1000-SIP10 Handbuch

Cisco

Cisco ASR-920-10SZ-PD Bedienungsanleitung

Cisco

Cisco 2821 Series Kurzanleitung

Cisco

Cisco WRT300N Bedienungsanleitung

Cisco

Cisco NCS 540 Series Bedienungsanleitung

Cisco

Cisco Card Cage and Backplane 7513-MX Leitfaden

Cisco

Cisco ME 4924-10GE Originalbetriebsanleitung

Cisco

Cisco 867W Bedienungsanleitung

Cisco

Cisco WRT55AG Bedienungsanleitung

Cisco

Cisco SB 100 Series Originalbetriebsanleitung

Cisco

Cisco Linksys E1200 Gebrauchsanweisung

Cisco

Cisco WRP500 Bedienungsanleitung

Cisco

Cisco ASR 903 Handbuch

Cisco

Cisco 1751V Handbuch

Cisco

Cisco IR829 Handbuch

Cisco

Cisco EA-Series Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco Linksys E2500 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung