Cisco 901 Bedienungsanleitung

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco ASR 901 Series Aggregation Services

Router Hardware Installation Guide

December, 2012

Text Part Number: OL-23778-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. OR LIMITED WARRANTY, CONTACT YOUR CISCO

REPRESENTATIVE FOR A COPY.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this

URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

iii

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

CONTENTS

About This Guide vii

Document Revision History vii

Objectives viii

Audience viii

Organization viii

Conventions viii

Safety Warnings ix

Related Documentation ix

Obtaining Documentation, Obtaining Support, and Security Guidelines x

CHAPTER

1Introduction 1-1

Hardware Description 1-1

Cisco ASR 901 Router Front View 1-2

Cisco ASR 901 Router Ethernet Version Front View 1-3

Cisco ASR 901 Router Rear View 1-4

LEDs 1-5

Power Supply 1-5

Safety Precautions 1-5

Environmental Monitoring Temperature Sensor 1-7

System Specifications 1-7

Router Interface Numbering 1-7

Regulatory Compliance 1-8

CHAPTER

2Preparing to Install the Router 2-1

Safety Guidelines 2-1

Safety with Equipment 2-1

Safety with Electricity 2-2

Preventing Electrostatic Discharge Damage 2-3

Prerequisites 2-4

Site Planning 2-4

Power Supply Considerations 2-4

Site Environment 2-4

Air Flow Guidelines 2-5

Contents

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

Method of Procedure 2-5

Unpacking and Checking the Contents of your Shipment 2-6

Required Tools and Equipment 2-6

Installation Checklist 2-7

Creating a Site Log 2-8

Console Port Considerations 2-8

Console Port Connections 2-8

CHAPTER

3Installing the Cisco ASR 901 Mobile Wireless Router 3-1

Network Modules 3-1

Mounting the Cisco ASR 901 Router 3-2

Rack-Mounting Configuration Guidelines 3-2

Attaching the Rack-Mounting Brackets 3-3

Mounting the Cisco ASR 901 Router in a Rack 3-3

Attaching the Cable Guides 3-4

Connecting the Chassis Ground and Power 3-5

Grounding the Cisco ASR 901 Router 3-5

Power Connection Compliance 3-7

Wiring the DC-Input Power Source 3-8

Installing and Removing SFP Modules 3-9

Installing SFP Modules 3-9

Removing SFP Modules 3-10

Connecting Cables 3-11

Connecting the Console Port 3-11

Types of RJ-45 Cables 3-12

Console Port 3-12

Connecting the Network Cables 3-13

Connecting Gigabit Ethernet Interface Cables 3-13

Connecting T1 and E1 Interface Cables 3-13

Connecting SFP Cables 3-14

Connecting Cables to the BITS Interface 3-14

Connecting GPS Cables 3-14

Connecting to Alarm Port 3-15

Connecting to the Management Ethernet Port 3-15

Dressing Router Cables 3-15

Powering On the Router 3-15

Checklist for Power Up 3-16

Interpreting Front-Panel LEDs 3-16

Power-On Procedure 3-16

Contents

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

Formatting Procedures for Flash Memory 3-16

Formatting Flash Memory as a DOS File System 3-16

File and Directory Procedures 3-17

Copying Files 3-17

Displaying Contents of the Flash Memory 3-17

Deleting Files from the Flash Memory 3-18

Displaying File Content 3-18

Enter a Directory and Determine the Current Directory 3-19

What to Do After Installing the Hardware 3-19

APPENDIX

ATroubleshooting A-1

Problem Solving A-1

Troubleshooting the Power and Cooling Systems A-2

Environmental Reporting Features A-2

Troubleshooting Cables, and Connections A-3

Reading the LEDs A-4

Chassis LEDs A-4

T1/E1 Interface LEDs A-5

SFP Ethernet Interface LEDs A-5

RJ-45 Ethernet Interface LEDs A-5

APPENDIX

BCable Specifications B-1

Gigabit Ethernet Connector Pinouts B-1

SFP Port Pinouts and Cable Specifications B-2

T1/E1 Port Pinouts B-2

Console Port Signals and Pinouts B-3

Identifying a Rollover Cable B-5

BITS Port Pinouts B-6

Time of Day Pinouts B-6

GPS Port Pinouts B-6

Alarm Port Pinouts B-7

Management Ethernet Port Pinouts B-7

APPENDIX

CSite Log C-1

NDEX

Contents

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

vii

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

About This Guide

This section describes the objectives, audience, organization, and conventions of this hardware

installation guide.

Note Use this document with the documents listed in the “Related Documentation” section on

page ix.

This section contains the following topics:

• Document Revision History, page vii

• Objectives, page viii

• Audience, page viii

• Organization, page viii

• Conventions, page viii

• Safety Warnings, page ix

• Related Documentation, page ix

• Obtaining Documentation, Obtaining Support, and Security Guidelines, page x

Document Revision History

The Document Revision History table below records technical changes to this guide. The table shows

the document revision number for the change, the date of the change, and a brief summary of the change.

Not all Cisco documents use a Document Revision History table.

Revision Date Change Summary

OL-23778-01 October 2011 Initial version of the document.

OL-23778-01 February 2012 Updated T1/E1 Interface LEDs section in the Troubleshooting

chapter.

viii

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

About This Guide

Objectives

This guide explains how to install, maintain, and troubleshoot your router hardware.

It provides the minimum software configuration information. For the detailed configuration procedures,

see the Cisco IOS configuration guide and command reference publications. For more information, see

the “Obtaining Documentation, Obtaining Support, and Security Guidelines” section on page x.

Warranty, service, and support information is in the Cisco Information Packet that is shipped with your

router.

Audience

This guide is designed for personnel who install, configure, and maintain the router. These persons

should be familiar with electronic circuitry and wiring practices and be experienced electronic or

electromechanical technicians. This guide identifies certain procedures that should be performed only

by trained and qualified personnel.

Organization

Conventions

Note Means reader take note.

Tip Means the following information will help you solve a problem.

Chapter Title Description

Chapter 1 Introduction Describes the hardware features and specifications of

the routers.

Chapter 2 Preparing to Install the Router Describes safety recommendations, site requirements,

network connection considerations, required tools and

equipment, and provides the installation checklist.

Chapter 3 Installing the Cisco ASR 901

Mobile Wireless Router

Includes router installation information, and shows

how to connect the router console/auxiliary port.

Appendix A Troubleshooting Describes how to isolate problems, read LEDs,

interpret error and status messages, and recover

software images.

Appendix B Cable Specifications Provides cable specifications to use if you plan to build

your own cables.

Appendix C Site Log Provides example site log.

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

About This Guide

Caution Means reader be careful. In this situation, you might perform an action that could result in equipment

damage or loss of data.

Safety Warnings

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might

harm you. A warning symbol precedes each warning statement. The safety warnings provide safety

guidelines that you should follow when working with any equipment that connects to electrical power

or telephone wiring. Warnings are translated into several languages. (For information about compliance

guidelines and translated safety warnings, refer to Cisco Regulatory Compliance and Safety Information

for the Cisco ASR 901 Router.

Related Documentation

For additional information about the Cisco ASR 901 router, refer to the following documents:

• Cisco Regulatory Compliance and Safety Information for Cisco ASR 901 Series Aggregation

Services Router

• Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide

• Cisco ASR 901 Series Aggregation Services Router Command Reference

• Release Notes for Cisco ASR 901 Series Aggregation Services Router

To access the related documentation on Cisco.com, go to:

http://www.cisco.com/en/US/partner/products/ps12077/tsd_products_support_series_home.html

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. Use the statement number provided at the end of

each warning to locate its translation in the translated safety warnings that accompanied this

device.

Statement 1071

SAVE THESE INSTRUCTIONS

Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide

OL-23778-01

About This Guide

Obtaining Documentation, Obtaining Support, and Security

Guidelines

For information on obtaining documentation, obtaining support, providing documentation feedback,

security guidelines, and also recommended aliases and general Cisco documents, see the monthly

What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical

documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Andere Handbücher für 901

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco ASR-920-8S4Z-PD Handbuch

Cisco

Cisco 3700 series Handbuch

Cisco

Cisco Cisco ASR 5000 Application Detection and Control Administration... Handbuch

Cisco

Cisco Small Business Pro SRP527W Bedienungsanleitung

Cisco

Cisco ASR 900 Series Bedienungsanleitung

Cisco

Cisco NCS 5501 Handbuch

Cisco

Cisco ASR 1000 Series Bedienungsanleitung

Cisco

Cisco 2801 - Integrated Services Router Bedienungsanleitung

Cisco

Cisco NCS 5500 Series Bedienungsanleitung

Cisco

Cisco Catalyst 2900 Series XL Bedienungsanleitung

Cisco

Cisco Linksys WET11 Bedienungsanleitung

Cisco

Cisco NCS 4000 Series Bedienungsanleitung

Cisco

Cisco 1841 - 3G Bundle Router Bedienungsanleitung

Cisco

Cisco Unified Communications Manager 8.5(1) Bedienungsanleitung

Cisco

Cisco WIC-1ENET - 1700 Access Routers 1port10bt Enet Wan... Bedienungsanleitung

Cisco

Cisco Nexus 5500 Series NX-OS Bedienungsanleitung

Cisco

Cisco ADSL Modem Router Bedienungsanleitung

Cisco

Cisco ASR 907 Bedienungsanleitung

Cisco

Cisco SFE2010 Bedienungsanleitung

Cisco

Cisco Linksys E900 Bedienungsanleitung

Cisco

Cisco vEdge Series Handbuch

Cisco

Cisco 7600 Series Bedienungsanleitung

Cisco

Cisco 3845 - Security Bundle Router Bedienungsanleitung

Cisco

Cisco RVS4000 - Gigabit Security Router Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung