Cisco Linksys E900 Bedienungsanleitung

Getting to know the E900

Article ID: 23417

The Linksys E900 Wireless-N Router lets you access the Internet via a 2.4 GHz

wireless connection or through one of its four-port switch. The range of this router

can reach up to 250 meters.

NOTE: Wireless signal is greatly affected by walls and other electronic devices. This

will reduce the range of the router dramatically.

Product Features:

•Wireless-N Technology

•2.4 GHz radio frequency

•2x2 Transmit/Receive function

•2 internal antennas

•Guest Access feature

•4 x 10/100 Ethernet ports

•Includes Cisco Connect Software

Top Panel:

Security features are included to help protect your data and privacy while connected

online. Security features are:

Set

sof

por

•Wi-Fi

your wi

•Statef

Linksy

•Netwo

entire

ing up the

ware. Co

-based se

k Panel:

Inter

Internet p

d to conne

modem a

Internet L

. It flashe

E: Rear

4, 3,

rotected

reless net

l Packet I

E900.

k Addres

etwork to

Linksys E9

figuring its

up page.

et:

rt is where

t one end

d the othe

D lights u

to indicat

ort lights

, 1:

ccess 2 (

ork.

spection

(

Translati

ccess the I

0 is easy

advanced

o know m

you conne

f the netw

r end to th

when the

network a

an be turn

PA2) sec

(

SPI) firew

n (NAT) t

nternet a s

sing the la

ettings is

re about t

t the Ethe

rk cable t

Internet p

e is a conn

ctivity over

d OFF. F

rity provid

ll blocks u

chnology

ngle Intern

test versio

vailable th

e E900, cli

net cable f

the Ether

rt on your

ection mad

the Interne

r instructi

s encrypti

wanted ac

rotects an

t IP addre

of Cisco

ough the r

ck here.

om your m

et port on

Linksys E9

e through t

t port.

ns, click h

n for data

ess to you

allows yo

onnect

uter’s

dem. Yo

our cable

e Internet

re.

will

Usi

wir

indi

Lig

If y

use

you

g Etherne

d network

LEDs on t

0 is conne

cate netwo

Power L

ts up Gre

WiFi Pro

u have cli

the WiFi

r wireless

Power:

Power po

tom Panel

cables, th

and other

e back pa

ted to a d

k activity o

n when th

ected Set

nt devices,

rotected

etwork(s).

t is where

se Ethern

thernet ne

el serve t

vice throu

ver a certa

router is p

p (WPS)

such as w

etup butto

To learn

ou connec

t ports co

work devic

o purpose

h one of th

n port.

wered O

utton:

reless ada

to autom

ore about

t the powe

nect the ro

es.

. The LE

e Ethernet

ters, that

tically con

he WPS f

adapter.

uter to com

stays lit w

ports. It fl

upport WP

igure wirel

ature, clic

puters on

hen the Lin

shes to

, then yo

ss securit

here.

our

ksys

can

for

Reset:

There are two ways to reset the Linksys E900 to its factory defaults. Either press or

hold the Reset button for approximately five seconds, or restore the defaults from the

Administration > Factory Defaults page on the router's web-based setup page.

TABLE OF CONTENTS

HARDWARE INFORMATION

1. What is E900?

2. What is the default IP Address, Username and Password to login to the

E900’s web-based setup page?

3. How do I reset the E900 to factory defaults?

4. What is the Warranty period of the E900?

5. How do I reboot the E900?

6. Does E900 support remote management?

SECURITY SUPPORTED

1. What is the default SSID broadcast of E900?

2. How many security modes are supported in E900?

3. Does E900 allow VPN tunnels using IPSec, L2TP, or PPTP protocols to

pass through the router?

4. Does E900 support SPI firewall?

5. How does Web Filter work?

FIRMWARE UPGRADE METHOD

1. How do I upgrade the Firmware of the E900?

SPECIAL FEATURES

1. What DDNS providers does the E900 support?

2. How many connection types does the E900 support?

3. Does E900 support AP Isolation?

4. Does E900 support wireless and Internet Access Priority QOS?

5. Does E900 support transmission of the log information to a log server?

6. Does E900 lose the settings you have customized when its firmware has

been updated?

7. What is Radio Band, Standard and Wide?

8. What is "MAC address clone" and what is it for?

9. What is Diagnostics and what is it for?

10. What is Port Forwarding?

11. What is Port Triggering?

12. What is "DMZ" and what is it for?

13. How many Network modes supported in E900?

14. What is wireless MAC Filter and what is it for?

15. What is UPnP?

16. Does it have a Guest access and Parental controls in the web-based

setup page?

17. What software does the E900 come with?

HARDWARE INFORMATION

1. What is E900?

The Linksys E900 is a Wireless-N router with four Ethernet ports. You can also use

the router to share resources such as computers, printers and files. Various security

features such as SPI Firewall help protect your data and your privacy while you are

online.

2. What is the default IP Address, Username and Password to login to the

E900’s web-based setup page?

The default IP Address is 192.168.1.1. The username and the password is “admin”.

3. How do I reset the E900 to factory defaults?

There are two (2) ways on how to reset the Wireless-N router to factory defaults.

• Hardware Reset

Press and hold the Reset button located at the bottom panel for about five (5)

seconds then release.

• Software Reset

Access the web-based setup page, go to Administration tab > Factory

Defaults sub-tab, click the Restore Factory Defaults button.

4. What is the warranty period of the E900?

One (1) year limited warranty.

5. How do I reboot the E900?

You can turn OFF the power first then turn it back ON or you can click the Reboot

button when you access the web-based setup page under the Basic Setup tab.

6. Does E900 support remote management?

Remote Management is a feature that allows you to access and manage your

Linksys router from a remote location. You need to be connected to the Internet to be

able to do remote management. The Linksys E900 supports this feature. If you

want to learn more about remote management, click here.

SECURITY SUPPORTED

1. What is the default SSID broadcast of E900?

The default SSID of the E900 is CiscoXXXXX.

NOTE: "XXXXX" is the last five (5) digits of the router’s serial number, which is

found at the bottom of the router.

2. How many security modes are supported in E900?

The E900 supports the following wireless security options: WPA2/WPA Mixed Mode,

WPA2 Personal, WPA Personal, WPA2/WPA Enterprise Mixed Mode, WPA2

Enterprise, WPA Enterprise, WEP, and RADIUS.

3. Does E900 allow VPN tunnels using IPSec, L2TP, or PPTP protocols to pass

through the router?

Yes.

4. Does E900 support SPI firewall?

Yes.

5. How does the Web Filter on the E900 work?

Web Filter will filter Java, ActiveX, Cookies, and Proxy applications in the network.

FIRMWARE UPGRADE METHOD

1. How do I upgrade the Firmware of the E900?

Step 1:

Access the router’s web-based setup page.

Step 2:

Go to Administration tab and select Firmware Upgrade.

Step 3:

Select the file to upgrade by using the Browse... button.

Step 4:

Click Start to Upgrade.

NOTE: Do not reset or powercycle the router until the upgrade is complete.

SPECIAL FEATURES

1. What DDNS providers does the E900 support?

DynDNS.org and TZO.com

2. How many connection types does the E900 support?

The router supports six (6) connection types: Automatic Configuration – DHCP, Static

IP, PPPoE, PPTP, Telstra Cable, and L2TP.

3. Does E900 support AP Isolation?

No.

4. Does E900 support wireless and Internet Access Priority QOS?

Yes.

5. Does E900 support transmission of the log information to a log server?

No.

6. Does E900 lose the settings you have customized when its firmware has been

updated?

Yes. Before upgrading the firmware of your E900, write down all your customized

settings. After upgrading its firmware, you will have to re-enter all of your

configuration settings.

7. What is Radio Band, Standard and Wide?

The Radio Band gives you two (2) options: Auto and Standard - 20MHz channel,

Standard channel is what all B/G/N devices use. If you select Wide channel for the

Radio Band setting, then Wireless-N can use two channels: a primary one (Auto) and

a secondary one (Standard Channel). This will improve Wireless-N performance.

8. What is "MAC address clone" and what is it for?

Some Internet Service Providers, especially Cable companies, require you to register

the MAC Address of the modem, router or Ethernet adapter of the computer in order

to access the Internet. If you do not wish to re-register the MAC address currently

registered with your ISP, you may assign the MAC address you have currently

registered with your ISP to the router using the MAC Address Clone feature.

If you want to clone the MAC address of the computer that you are using to configure

the router, and then click the Clone My MAC Address button. The router will

automatically detect your computer’s MAC address, so you do NOT have to call your

ISP to change the registered MAC address to the router’s MAC address. It is

recommended that the computer registered with the ISP is used to enable this feature

on the router.

9. What is Diagnostics and what is it for?

Diagnostics is used to check internet connect and application "ping”, "traceroute”

command to check your network’s connectivity to the Internet.

10. What is Port Forwarding?

Port Forwarding allows you to set up public services on your network, such as web

servers, ftp servers, e-mail servers, or other specialized Internet applications.

11. What is Port Triggering?

Port Triggering will forward port based on the incoming port specified. Check your

software application to find out what is necessary to enter in these fields.

NOTE: You can set up to ten (10) port triggering entries.

12. What is "DMZ" and what is it for?

Demilitarized Zone (DMZ) allows one local user to be exposed to the Internet for use

of a special-purpose service such as Internet gaming and videoconferencing. DMZ

hosting forwards all the ports at the same time to one computer. However, Port

Range Forwarding is more secure because it only opens the ports you want to

forward, while DMZ hosting opens all the ports of one computer, exposing the

computer to the Internet.

13. How many Network modes supported in E900?

It supports three (3) Network Modes - 802.11b, 802.11g, 802.11n.

14. What is wireless MAC Filter and what is it for?

Wireless MAC Filter prevents or allows connectivity to the wireless network with the

use of the MAC address of the wireless device.

15. What is UPnP?

Universal Plug and Play (UPnP) allows Windows to automatically configure the

router for various Internet applications, such as gaming and videoconferencing.

16. Can I configure Guest access and Parental controls feature using the

web-based setup page?

Yes. To know how to set up the Guest Access feature of the E900 using the

web-based setup page, click here.

To know how to set up the Parental controls of the E900 using the web-based setup

page, click here.

17. What software does the E900 come with?

The E900 comes with Cisco Connect Software version 1.3. To learn how to set up

your Linksys Wireless-N Router for the first time using Cisco Connect, click here.

NOTE: Older versions of Cisco Connect for Mac computers have compatibility

issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect

versions 1.4.11222 and newer are compatible with the Lion operating system. For

more information, click here.



Andere Handbücher für Linksys E900

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco Linksys BEFVP41 v2 Bedienungsanleitung

Cisco

Cisco CISCO827 Bedienungsanleitung

Cisco

Cisco 12000 - Series Chassis Modular Expansion... Bedienungsanleitung

Cisco

Cisco 3000 Series Bedienungsanleitung

Cisco

Cisco 700 series Bedienungsanleitung

Cisco

Cisco ASR 1004 Installationsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco 860 Series Handbuch

Cisco

Cisco 7513 Series Bedienungsanleitung

Cisco

Cisco Catalyst 2820 Anleitung zur Verwendung

Cisco

Cisco ASR 901S Series Merkblatt

Cisco

Cisco 2811 - Voice Security Bundle Router Montageanleitung

Cisco

Cisco RVS4000 - Gigabit Security Router Bedienungsanleitung

Cisco

Cisco IAD2431-1T1E1 Installationsanleitung

Cisco

Cisco 815 Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Bedienungsanleitung

Cisco

Cisco 1811 Bedienungsanleitung

Cisco

Cisco 8100 Series Handbuch

Cisco

Cisco NCS 6008 Bedienungsanleitung

Cisco

Cisco WRT350N Bedienungsanleitung

Cisco

Cisco 500 Series Originalbetriebsanleitung

Cisco

Cisco IR8340 Kurzanleitung

Cisco

Cisco ASR 1000 Series Bedienungsanleitung

Cisco

Cisco 2515-RF - 2515 Router Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung