Cisco 8100 Series Handbuch
Hardware Installation Guide for Cisco 8100 Series Routers
First Published: 2021-03-17
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
©2021 Cisco Systems, Inc. All rights reserved.
CONTENTS
Cisco 8100 Series Routers Overview 1
CHAPTER 1
Cisco 8100 Series Routers 1
Field Replaceable Units 2
Prepare for Installation 7
CHAPTER 2
Safety Guidelines 7
Compliance and Safety Information 8
Laser Safety 8
Energy Hazard 9
Preventing Electrostatic Discharge Damage 9
Cautions and Regulatory Compliance Statements for NEBS 10
Installation Guidelines 10
Procure Tools and Equipment 11
Accessory Kit 11
Prepare Your Location 12
Prepare Yourself 13
Prepare Rack for Chassis Installation 14
Clearance Requirements 15
Installing the Chassis 17
CHAPTER 3
Rack Mount the Chassis 17
Rack-Mount the Chassis in a 4-Post Rack 17
Ground the Chassis 19
Connect AC Power to the Chassis 20
Connect DC Power to the Chassis 22
Hardware Installation Guide for Cisco 8100 Series Routers
iii
Connect Router to the Network 25
CHAPTER 4
Port Connection Guidelines 25
Transceiver and Cable Specifications 26
Connecting a Console to the Router 26
Connect the Management Interface 27
Install and Remove QSFP Transceiver Modules 28
Installing the Transceiver Module 28
Connect Interface Ports 30
Connect a Fiber-Optic Port to the Network 31
Disconnect Optical Ports from the Network 31
Maintain Transceivers and Optical Cables 31
Replace Chassis Components 33
CHAPTER 5
Replace Fan Modules for Cisco 8100 Series Routers 33
Replace Power Supply 35
LEDs 37
CHAPTER 6
Chassis LEDs 37
Fan Tray LED 38
Power Supply LEDs 39
Port Status LEDs 41
Hardware Installation Guide for Cisco 8100 Series Routers
iv
Contents
CHAPTER 1
Cisco 8100 Series Routers Overview
•Cisco 8100 Series Routers, on page 1
•Field Replaceable Units, on page 2
Cisco 8100 Series Routers
The Cisco 8100 Series Routers utilizes Cisco’s new Router-on-Chip (RoC) model to deliver full routing
functionality with a single ASIC per router. The RoC architecture is distinguished from System-on-Chip (SoC)
switches by supporting large forwarding tables, deep buffers, more flexible packet operations, and enhanced
programmability.
The Cisco 8100 series routers include the following variants:
•Cisco 8102-64H - It provides 6.4 Tbps of network bandwidth with dramatically lower power consumption
than contemporary 10 Tbps systems. The Cisco 8102 Router is a fixed port, high density, two rack unit
form-factor router. Supported ports include 64 x 100G QSFP28.
• Cisco 8102-64H-O - It provides 6.4 Tbps of network bandwidth with dramatically lower power
consumption than contemporary 10 Tbps systems. The Cisco 8102 Router is a fixed port, high density,
two rack unit form-factor router. Supported ports include 64 x 100G QSFP28. The Cisco 8102-64H-O
supports the open-source network operating system SONiC (Software for Open Networking in the Cloud).
• Cisco 8101-32FH - It provides 12.8Tbps of network bandwidth. The Cisco 8101-32FH Router is a fixed
port, high density, one rack unit form-factor router. Supported ports include 32 x 400G QSFP-DD. The
functionality and installation of this router is similar to that of Cisco 8201-32FH. The Hardware Installation
Guide for Cisco 8201-32FH is available here.
Hardware Installation Guide for Cisco 8100 Series Routers
1
Figure 1: Cisco 8102-64H Router—Front View
32 QSFP28 ports1
32 QSPF28 ports2
Figure 2: Cisco 8102-64H Router—Rear View
Fan Tray
Three Fans: FT0, FT1, and FT2
1
PSU-0 and PSU-12
Ground Lug Location3
Field Replaceable Units
The router has two field replaceable units (FRUs):
• Fan Module
Hardware Installation Guide for Cisco 8100 Series Routers
2
Cisco 8100 Series Routers Overview
Field Replaceable Units
• Power Supply Unit
Both the FRUs support OIR (Online Insertion and Removal).
Fan Module
The router has three latched fan modules that installs into the chassis from the rear. Fans cool the system and
maintain proper airflow through the system. The fan modules work with N+1 redundancy.
Figure 3: Fan Module - Cisco 8102-64H
Fan1
Table 1: Fan Module PIDs
Fan Module PID
FAN-2RU-PI-V2
The color of the fan module is Burgundy.
Port side intake
FAN-2RU-PE-V2
The color of the fan module is Blue.
Port side exhaust
Power Supply Unit
The router has two PSUs that install into the chassis from the rear. The PSUs work with 1+1 redundancy and
the router supports two AC or two power supplies. The PSUs can be:
• AC to DC type - 650W
• DC to DC type - 930W
The PSUs provide 12V power to the entire system.
Table 2: PIDs for Power Supply Unit
DC PIDAC PID
• PSU930W-DCPI
• PSU930W-DCPE
• PSU650W-ACPI
• PSU650W-ACPE
Hardware Installation Guide for Cisco 8100 Series Routers
3
Cisco 8100 Series Routers Overview
Field Replaceable Units
Figure 4: Power Supply Unit
SSD Card
The router has a removable Solid State Drive (SSD) card. We recommend to remove the SDD card before
shipping the hardware for a Return Merchandise Authorization (RMA) request. Removal of the SSD card
enforces customer data security while performing an RMA.
You can access the SSD card by using the hatch provided on the top panel. To remove the SSD card, follow
the instructions mentioned on the printed label on the hatch.
Figure 5: Remove the Hatch
Hardware Installation Guide for Cisco 8100 Series Routers
4
Cisco 8100 Series Routers Overview
Field Replaceable Units
Figure 6: SSD Card Removal Instructions
Hardware Installation Guide for Cisco 8100 Series Routers
5
Cisco 8100 Series Routers Overview
Field Replaceable Units
Hardware Installation Guide for Cisco 8100 Series Routers
6
Cisco 8100 Series Routers Overview
Field Replaceable Units
Inhaltsverzeichnis
Andere Cisco Netzwerk-Router Handbücher
Cisco
Cisco RV016 - Small Business - 10/100 VPN Router Bedienungsanleitung
Cisco
Cisco AGS+ Bedienungsanleitung
Cisco
Cisco ASR 9000 Series Bedienungsanleitung
Cisco
Cisco ASR 903 Handbuch
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
Cisco
Cisco WS-C2960-24LC-S Bedienungsanleitung
Cisco
Cisco 880 Series Bedienungsanleitung
Cisco
Cisco 2691 Series Bedienungsanleitung
Cisco
Cisco 1600 series Bedienungsanleitung
Cisco
Cisco 7206VXR NPE-400 Bedienungsanleitung
Cisco
Cisco Network Convergence System 540 Handbuch
Cisco
Cisco CCNA 2 Bedienungsanleitung
Cisco
Cisco SRP520 Bedienungsanleitung
Cisco
Cisco NCS 5700 Series Handbuch
Cisco
Cisco ASR 1000 Series Bedienungsanleitung
Cisco
Cisco ASR1004 - ASR 1004 Modular Expansion Base Handbuch
Cisco
Cisco OSR-7609 Installations- und Betriebshandbuch
Cisco
Cisco ASR1004 - ASR 1004 Modular Expansion Base Bedienungsanleitung
Cisco
Cisco 809 Kurzanleitung
Cisco
Cisco SB 107 Bedienungsanleitung
