Cisco RV132W Bedienungsanleitung

Cisco RV132W ADSL2+ Wireless-N and

RV134W VDSL2 Wireless-AC VPN Router

Command Line Interface (CLI) Reference Guide

CLI GUIDE

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks,

go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner

does not imply a partnership relationship between Cisco and any other company. (1110R)

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide

Contents

Chapter 1: Introduction 5

Accessing the CLI 5

Connecting to a Console Terminal 6

CLI Command Conventions 7

Entering Commands 7

Chapter 2: Basic Commands 9

? 9

exit 9

help 10

logout 10

quit 11

reboot 11

Chapter 3: Management Commands 13

loglevel 13

loglevel get appname 13

loglevel set appname 14

nslookup 14

ping 15

restoredefault 16

save 16

ssh 17

ssh {enable | disable} 17

ssh wan {enable | disable} 17

ssh show 18

swversion 18

syslog 19

syslog dump 19

traceroute 19

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide

Contents

uptime 20

Chapter 4: Configuration Commands 22

dhcpserver 22

dhcpserver config vlanID start-IP-address end-IP-address leased-time de-

fault-gateway-IP-address 22

dhcpserver reserving {add | delete} vlanID description IP-address MAC-ad-

dress 23

dhcpserver show vlanX 24

lan 24

lan config --ipaddr bridge-name primary IP-address subnet-mask 24

lan config --dhcpserver bridge-name {enable | disable} 25

lan config --dhcpclient bridge-name {enable | disable} 25

lan show bridge-name 26

lanhosts 26

lanhosts show all 26

lanhosts show vlanX 27

tr69cfg 27

tr69cfg {enable | disable} 28

tr69cfg modify --interval informinterval --acsurl acsurl --acsuser acsuser --ac-

spwd acspwd --cruser connrequser --crpwd connreqpwd 28

tr69cfg show 29

tr69cfg informEnable {enable | disable} 29

tr69cfg debug {enable | disable} 30

vlan 30

vlan add --vid vlanID --desc description --intervlan-routing {enable | disable} --

port1 {untagged | tagged | excluded} --port2 {untagged | tagged | excluded} --

port3 {untagged | tagged | excluded} --port4 {untagged | tagged | excluded}

(port4 is for RV134W) 31

vlan edit bridge-name --vid vlanID --desc description --intervlan-routing {en-

able | disable} --port1 {untagged | tagged | excluded} --port2 {untagged |

tagged | excluded} --port3 {untagged | tagged | excluded} --port4 {untagged |

tagged | excluded} (port4 is for RV134W) 31

vlan delete --vid vlanID 32

vlan show 33

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide

Contents

vpn 33

vpn add --name connection-name --psk pre-shared key --rwan remote wan IP

--rlan remote lan IP --rmask remote lan mask --lan local lan ip --lanmask local

lan mask 34

vpn stop --name connection-name 34

vpn start --name connection-name 35

vpn restart 35

vpn restart --name connection-name 36

vpn delete --name connection-name 36

vpn show 37

wan 37

wan {add | edit} interface atm portid.vpi.vci --linktype {eoa | pppoa | ipoa} --en-

cap {llc | vcmux} --atmcat {ubr | cbr pcr | nrt vbr pcr scr mbs | rtvbr pcr scr mbs}

wan delete interface atm portid.vpi.vci 39

wan {add | edit} service atm portid.vpi.vci --protocol {bridge | ipoe | pppoe | ipoa

| pppoa} 40

wan {add | edit} service ptm --protocol {bridge | ipoe | pppoe} 40

wan {add | edit} service eth --protocol {dhcp | static | pppoe | l2tp | pptp} 41

wan delete service atm portid.vpi.vci --vlan vlanID 41

wan delete service ptm --vlan vlanID 42

wan delete service eth --vlan ethlanID 42

wan show 43

wan show interface 43

wlan 44

wlan --i interface {enable | disable} 45

wlan --i interface --ssid ssid 45

wlan --ssid ssid --mode mode --band band --channel channel --vlan vlanID 46

wlan --ssid ssid --smode disable 47

wlan --ssid ssid --smode wep --authtype {0|1} --encry {128 | 64} --key1 key1 -

-key2 key2 --key3 key3 --key4 key4 --txkey {1 | 2 | 3 | 4} 47

wlan --ssid ssid --smode {wpa2_personal | wpa_personal_mixed} --encry

{TKIP_AES | AES} --skey shared key --krenew renewal-seconds 48

wlan --ssid ssid --smode {wpa2_enterprise | wpa_enterprise_mixed} --encry

{TKIP_AES | AES} --rserver radius-server-IP --rport port --skey shared-key --

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide

Contents

krenew renew-seconds 49

Chapter 5: Where to Go From Here 50

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 5

Introduction

The command-line interface (CLI) provides a text-based method for managing and

monitoring the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2

Wireless-AC VPN routers. This chapter describes how to use the command-line

interface and contains the following topics:

•Accessing the CLI

•CLI Command Conventions

•Entering Commands

Accessing the CLI

Connecting via SSH

The command-line interface can be accessed by using SSH or a physical console.

To enable SSH, follow these steps:

STEP 1 Log in the web UI of the device. Enter the username/password.

STEP 2 Click Firewall > Basic Settings. Check Enable SSH to allow login from the LAN

side. Check Enable Remote SSH to allow login from Internet.

STEP 3 When accessing the device by SSH, username/password is needed. The

username/password is same as the GUI password.

After successfully log in to the router, the prompt consists of the router’s hostname

+ last 3 bytes of LAN MAC, followed by a >, as shown here:

router06000a>

To access the SSH, a terminal emulator software like PuTTY or others must be

used. We use PuTTY as an example.

Introduction

Accessing the CLI

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 6

PuTTY - Terminal Emulator Software

First, download Putty and install it on your computer. You can download PuTTY

from http://www.chiark.greenend.org.uk/~sgtatham/putty/ or another PuTTY

download source. The "putty.exe" download is good for basic SSH.

STEP 1 Download PuTTY and save the download to your C:\WINDOWS folder.

STEP 2 If you want to make a link to PuTTY on your desktop:

•Open the C:\WINDOWS folder in Windows Explorer.

•Right click on the putty.exe file and select Send To > Desktop.

STEP 3 Double-click the putty.exe program or the desktop shortcut to launch the

application.

STEP 4 Enter your connection settings:

•Host Name: example.com

•Port: 22 (Default)

•Connection Type: SSH (Default)

STEP 5 Click Open to start the SSH session.

STEP 6 Accept the connection by clicking Yes .

STEP 7 Once the SSH Connection is open, a terminal prompt will ask for your username:

•log in as: Enter your username

STEP 8 Connect with your SSH user of choice.

STEP 9 Next, enter your password. Note that you will NOT see the cursor moving, or any

characters typed (such as ******), when typing your password. This is a standard

PuTTY security feature. Hit Enter.

You are now logged in to your server with SSH.

Connecting to a Console Terminal

The computer must have a terminal emulation software installed. The software

may be configured with the following parameters: 115200 baud, 8 data bits, no

parity, 1 stop bit, and no mode control.

To connect the router to a terminal or computer, follow these steps:

Introduction

CLI Command Conventions

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 7

STEP 1 Connect the end of the light blue console cable with the RJ-45 connector to the

light blue console port on the router.

STEP 2 Connect the end of the cable with the DB-9 connector to the terminal or PC. If your

terminal or PC has a console port that does not accommodate DB-9 connector,

provide an appropriate adapter for that port.

STEP 3 Connect the AC power cord to the power supply.

STEP 4 Connect the power interface cable to the power connector port on the back of the

router.

CLI Command Conventions

There are certain command entry standards that apply to all commands. The

following table describes the command conventions:

Entering Commands

A CLI command is a series of keywords and arguments. Keywords identify a

command, and arguments specify configuration parameters. For example, in the

command interfaces set

appname

, and set are keywords, appname is an

argument that specifies the application name. To enter the commands that require

parameters, enter the required parameters after the command keyword.

[ ] In a command line, square brackets indicate an

optional entry.

{ } In a command line, curly brackets indicate a selection

of compulsory parameters separated with the |

character. One option must be selected.

Italics Italic text indicates a parameter, variable, and

arguments.

Bold Command names and keywords are shown in bold.

Screen Display Fixed-width font indicates CLI prompts, CLI commands

entered, and system messages displayed on the

console.

Introduction

Entering Commands

Cisco RV132W ADSL2+ Wireless-N and RV134W VDSL2 Wireless-AC VPN Router CLI Reference Guide 8

If the command entered is incomplete, invalid, or has missing or invalid

parameters, then the appropriate error message is displayed. This helps with

entering the correct command.

NOTE The commands are not case-sensitive.

All the allowable commands for RV132W & RV134W router are listed in next

chapter.

<TAB> Completes the keyword.

?Anywhere in the command line to display context-

sensitive help.

Enter (or Return) Syntax-checks and then executes a command. If there

is a syntax error, the offending part of the command

line is explained.

Ctrl-A Moves cursor to the beginning of the command line.

Ctrl-E Moves cursor to the end of the command line.

Ctrl-K Erases characters from the cursor.

Up Arrow Displays the previous command in the command

history.

Down Arrow Displays the next command in the command history.

Left Arrow Moves cursor to the previous character.

Right Arrow Moves the cursor to the next character.

Backspace Deletes the previous character.

?-Enter or ‘help’ List support commands.

Andere Handbücher für RV132W

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco 3600 Series Bedienungsanleitung

Cisco

Cisco CISCO10720 Bedienungs- und Wartungsanleitung

Cisco

Cisco 7000 and 7507 Chassis CHAS-7507 Leitfaden

Cisco

Cisco CISCO1721 Bedienungsanleitung

Cisco

Cisco ASR 902 Handbuch

Cisco

Cisco 7600-SIP-400 - SPA Interface Processor 400 Bedienungsanleitung

Cisco

Cisco RVS4000 - Gigabit Security Router Bedienungsanleitung

Cisco

Cisco DVB CAR100 Series Bedienungsanleitung

Cisco

Cisco SFE1000P - Small Business Managed Switch Bedienungsanleitung

Cisco

Cisco SOHO 71 Bedienungsanleitung

Cisco

Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle... Bedienungsanleitung

Cisco

Cisco 7200 Series Originalbetriebsanleitung

Cisco

Cisco cBR Series Handbuch

Cisco

Cisco ASR 900 Series Bedienungsanleitung

Cisco

Cisco SG 300-10P Bedienungsanleitung

Cisco

Cisco 1760 - VPN Bundle Router Bedienungsanleitung

Cisco

Cisco 2600-DC Series Bedienungsanleitung

Cisco

Cisco 8800 Series Handbuch

Cisco

Cisco ASR 1000 Series Bedienungsanleitung

Cisco

Cisco 1801 Bedienungsanleitung

Cisco

Cisco ASR 903 Betriebsanleitung

Cisco

Cisco 8608 Bedienungsanleitung

Cisco

Cisco RV340 Series Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung