Cisco RV180 Bedienungsanleitung

Andere Handbücher für RV180

4

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Cisco Netzwerk-Router Handbücher

Cisco

Cisco 805 Series Bedienungsanleitung

Cisco

Cisco ASR 1000 Series Bedienungsanleitung

Cisco

Cisco 1605-R Betriebsanleitung

Cisco

Cisco 1100-8P Handbuch

Cisco

Cisco WS-C6503 Bedienungsanleitung

Cisco

Cisco SG 300-10P Bedienungsanleitung

Cisco

Cisco Internet Router Cisco 12404 Bedienerhandbuch

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco 2610 - Router - EN Bedienungsanleitung

Cisco

Cisco 880 Series Bedienungsanleitung

Cisco

Cisco RV082 - Small Business VPN Router Bedienungsanleitung

Cisco

Cisco 800 Series Handbuch

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco 3825 - Voice Bundle Router Betriebsanleitung

Cisco

Cisco ME 4924-10GE Originalbetriebsanleitung

Cisco

Cisco Linksys E1200 Bedienungsanleitung

Cisco

Cisco 800 Series Leitfaden

Cisco

Cisco DC Power Entry 10005 ESR Bedienungsanleitung

Cisco

Cisco ASR 14000 Series Installationshandbuch

Cisco

Cisco NCS 5500 Series Handbuch

Cisco

Cisco CRS-1 - Carrier Routing System Router Bedienungsanleitung

Cisco

Cisco 1941-DC-A - MWR Mobile Wireless Edge Router Handbuch

Cisco

Cisco RV160W Bedienungsanleitung

Cisco

Cisco 6000 series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung

Lorex

Lorex F5D8230-4 Bedienungsanleitung

WAN Configuration on RV180 AND RV180W

Objectives

This document explains how to configure the IPv4 WAN(Internet) for use with a Static IP on

the RV180 and RV180W.

Static IP is for use with internet providers who assign the user a permanent IP address.

Using a static IP is less secure because the IP address is always the same, however it is

more dependable for some services. Such as Voice over Internet Protocol(VOIP) or if you

using the computer for a server.

Applicable Devices

• RV180

• RV180W

Steps of Procedure

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the Static IP option from the Internet Connection Type drop-down menu.

Step 3. Enter the information in the corresponding fields.

• IP Address— The IP address used by the WAN port.

• Subnet Mask— The sub-net mask used by the WAN port.

• Default Gateway

• Primary DNS Server

• Secondary DNS Server— (Optional) For use if you have a secondary DNS server in

place.

Step 3. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field

Step 4. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

• Enter a MAC address in the field.

Step 6. Click Save to save the changes.

PPPoE Configuration

NOTE: If you have a PPPoE connection, first create your PPPoE profile on the Networking

> WAN > PPPoE Profiles page.

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the PPPoE option from the Internet Connection Type drop-down menu.

Step 3. Choose PPPoE Profile name to be used from the drop down menu.

Step 4. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field.

Step 5. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

Step 6. Click Save to save the changes.

PPTP Configuration

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose the PPTP option from the Internet Connection Type drop-down menu.

Step 3. Enter the Username and password in the User name and Password fields

respectively provided by the ISP.

Step 3. (Optional) Check Enable for MPPE Encryption.

Step 4. (Optional) Click Connection Type to idle Time and enter idle time in minutes.

Note: WAN (internet) Idle Time out will not work if Bonjour is enabled in Discover-Bonjour

Page.

Step 5. Enter the My IP Address provided by ISP.

• Server IP Address — Enter the PPTP server ip address.

Step 6. Choose the MTU Type.

• Default— Default value is 1500 Bytes.

• Custom— Custom enable you to enter a custom MTU size(bytes) value in the MTU Size

field.

Step 7. Choose the MAC Address Source from the drop-down list.

• Use Default Address— Uses the defaults MAC address.

• Use This Computer's Address— Uses the MAC address your computer currently has.

• Use this MAC— Allows you to enter a specific MAC Address.

Step 8. Click Save to save the changes.

L2TP Configuration

Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4

WAN (internet). The IPv4 WAN (internet) page opens.

Step 2. Choose L2TP from Internet Connection Type drop-down menu.

Step 3. Enter Username and Password in the User name and Password fields

respectively provided by the ISP.