Cisco C880 M5 Bedienungsanleitung

Cisco C880 M5 Installation Manual

December 2017

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706 USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Preface

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE

SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND

RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED

WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY

FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET

FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED

HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED

WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF

THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED

SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION,

THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR

ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL,

CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,WITHOUT LIMITATION, LOST PROFITS OR

LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF

CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other

countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks

mentioned are the property of their respective owners. The use of the word partner does not imply a partnership

relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples,

command display output, and figures included in the document are shown for illustrative purposes only. Any use of

actual IP addresses in illustrative content is unintentional and coincidental.

Contents

Cisco C880 M5 Installation manual

Contents

1Preface ................................................................................................... 6

Concept and target groups for this manual..................................... 61.1

Notational conventions.................................................................... 71.2

2Functional overview.............................................................................. 8

Features .......................................................................................... 82.1

Server specification....................................................................... 142.2

3Installation steps, overview................................................................ 21

4Important information ......................................................................... 22

Safety instructions ......................................................................... 224.1

CE conformity................................................................................ 274.2

FCC Class A Compliance Statement ............................................ 274.3

Transporting the server ................................................................. 284.4

Environmental protection............................................................... 294.5

5Hardware installation.......................................................................... 30

Setup Workflow ............................................................................. 315.1

5.1.1 Advance preparation performed by the user ............................ 31

5.1.2 Work performed by the user ..................................................... 31

5.1.3 Work performed by a field engineer.......................................... 32

Unpacking the server .................................................................... 335.2

Rack installation/removal of server ............................................... 335.3

5.3.1 Rack system requirements ....................................................... 33

Connecting devices to the server.................................................. 375.4

Connecting the server to the mains .............................................. 385.5

5.5.1 Installation requirements ........................................................... 38

5.5.2 Input power connection specification ........................................ 41

5.5.3 Connecting diagram of the power cord..................................... 42

5.5.4 Connecting procedure of the power cord.................................. 44

Notes on connecting/disconnecting cables ................................... 455.6

Cisco C880 M5 Installation Manual

Contents

Notes on inserting/removing units.................................................455.7

6Starting up and operation ...................................................................46

Control elements and indicators....................................................466.1

6.1.1 Front of server ...........................................................................46

6.1.2 Rear of server............................................................................55

Switching the server on and off .....................................................606.2

Configuring the server ...................................................................626.3

6.3.1 Configuring Fast Boot................................................................62

6.3.2 Configuring Memory Mirror .......................................................63

6.3.3 Back up and restore RAID configuration via REST API............66

6.3.4 Configuring the server and installing the operating system ........71

6.3.5 Configuring Cougar5(EP540i) ...................................................71

Cleaning the server .......................................................................726.4

Setting of Boot Watchdog before and after Firmware Update of I/O6.5

card 73

6.5.1 Before Firmware Update ...........................................................73

6.5.2 After Firmware Update ..............................................................73

Rebuilding Software RAID after exchanging M.2 SSD .................736.6

Hot-plug Procedure .......................................................................746.7

6.7.1 Replacement procedure ............................................................74

6.7.2 Addition procedure ....................................................................75

7Property and data protection .............................................................76

Mechanical access protection .......................................................767.1

BIOS Setup security functions.......................................................767.2

8Troubleshooting and tips....................................................................77

System Power indicator remains unlit ...........................................778.1

Screen remains blank....................................................................788.2

Flickering stripes on monitor screen..............................................788.3

No screen display or display drifts.................................................798.4

Incorrect date and time..................................................................798.5

Drives reported as "dead" when starting system...........................798.6

Added drive reported as defective.................................................808.7

9Appendix ..............................................................................................81

Contents

Cisco C880 M5 Installation manual

Bus Number .................................................................................. 819.1

Correspondence between PHP Slot and Slot Numbers ............... 849.2

Device Path................................................................................... 849.3

Replacement of PCIe SSD SFF Slot Number .............................. 859.4

DIMM installation order ................................................................. 869.5

Component Layout........................................................................ 879.6

Cisco C880 M5 Installation Manual

1 Preface

The scalable Cisco C880 M5 is an Intel-based rack server for critical

company scenarios, e.g. as database management system for medium or

large-sized databases or as a consolidation basis to run an immensely large

number of different applications using virtualization technologies.

Thanks to its highly developed hardware and software components, the server

offers a high level of data security and availability. These include hot-plug

HDD/SSD modules, hot-plug system fans, and also hot-plug power supply

units and Automatic Server Reconfiguration and Restart (ASR&R).

Security functions in the BIOS Setup and on the System Board protect the

data on the server against manipulation. Additional security is provided by the

lockable rack door.

The server occupies 5 height units (HU) in the rack.

Concept and target groups for this manual1.1

This operating manual describes how to install, set up and operate your server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your Cisco C880 M5 into operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

Cisco C880 M5 Installation manual

Notational conventions1.2

The following notational conventions are used in this manual:

Table 1.1 notational conventions

Text in italics indicates commands or menu items.

"Quotation marks"

indicate names of chapters and terms that are being

emphasized.



describes activities that must be performed in the order

shown.

CAUTION!

pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

indicates additional information, notes and tips.

Cisco C880 M5 Installation Manual

2 Functional overview

This section provides information on the features and technical data of Cisco

C880 M5. For information on key characteristics and layout of the System

Board, see "Cisco C880 M5 Administration Guide".

Features2.1

Customer Self Service (CSS)

Customer Self Service (CSS) concept enables you to identify and replace the

affected component yourself in the case of certain error scenarios.

In the CSS concept, you can replace the following components yourself in the

event of an error:

–

Hot-plug HDD/SSD modules

–

Hot-plug power supply units

For information on replacing these components, see "Cisco C880 M5

Administration Guide".

CSS indicators on the control panel and on the back of Cisco C880 M5 server

provide you with information if a CSS event arises.

System Board

The features of the System Board are described in "Cisco C880 M5

Administration Guide", the setup possibilities are described in "Cisco C880 M5

BIOS Setup Guide".

Hard disk drives

The server can be equipped with eight HDD/SSD modules, eight PCIe SSD SFF

modules, or a mixture of four HDD/SSD and four PCIe SSD SFF. Each module

can accommodate an drive with a 2.5-inch format. The modules are

connected to the SAS/PCIe backplane wirelessly.

This allows HDD/SSD modules or PCIe SSD SFF modules to be plugged in or

pulled out easily.

The hard disk system is designed for SAS with one channel for each hard disk

drive.

If the server has the corresponding RAID configuration, the HDD/SSD modules

Cisco C880 M5 Installation manual

or the PCIe SSD SFF modules can also be replaced during operation.

SAS controller card (optionally with RAID controller)

The SAS controller card for operating up to four SAS hard disk drives can be

alternately without or with RAID functionality. In case of RAID functionality

the levels 0, 1, 1E, 5, 6 and 10 are supported.

Flash Backup Units

Up to two Flash Backup Units (FBUs) back up the memory contents of their

corresponding RAID controllers in the event of power failure (option).

Power supply

The server has up to six hot-plug power supply units, a 1600 watt version of

type "DPS-2200" for mains voltages 200 - 240 V. This guarantees a redundant

power supply.

If one power supply unit is defective, the other(s) then guarantee(s) unimpaired

operation. The faulty power supply unit can be replaced during operation.

High level of availability and data security

When memory data is accessed, 1-bit errors in the main memory are identified

and automatically corrected with the ECC (Error Correcting Code) method.

The memory modules used support SDDC+1 and ADDDC-MR technology

(Chipkill™), which further increases the effectiveness of memory error

monitoring and correction.

Support is likewise provided for hot-spare memory technology, in which a

memory module is used like a replacement module. If a memory module fails,

the module with the defective memory is automatically deactivated and the

replacement module is activated (provided it has been configured

appropriately in the BIOS). The deactivated memory module is no longer used

and the faulty memory module can be replaced at the next opportunity.

Memory modules can be protected against failure through full mirroring or

address range mirroring (memory mirroring requires eight memory modules).

ASR&R (Automatic Server Reconfiguration and Restart) restarts the system in

the event of an error and automatically "hides" the defective system

components.

The PDA (Prefailure Detection and Analyzing) technology analyzes and monitors

all components that are critical for system reliability.

The SAS controller card supports the RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60

thus increasing system availability and improving reliability.

Cisco C880 M5 Installation Manual

Additional reliability is provided by the hot-plug HDD/SSD modules, fans and

power supply units.

Andere Handbücher für C880 M5

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS 6500 Series Bedienungsanleitung

Cisco

Cisco UCS Invicta C3124SA Handbuch

Cisco

Cisco UCS B200 M2 Bedienungsanleitung

Cisco

Cisco ONS 15454 Handbuch

Cisco

Cisco SCE2020-4XGBE-SM Bedienungsanleitung

Cisco

Cisco UCS B200 M3 Handbuch

Cisco

Cisco UCS C220 M3 Systemhandbuch

Cisco

Cisco UCS Bedienungsanleitung

Cisco

Cisco UCS E Series Bedienungs- und Sicherheitshinweise

Cisco

Cisco UCS C220 M3 Bedienungsanleitung

Cisco

Cisco AS5300 - Universal Access Server Bedienungsanleitung

Cisco

Cisco Sourcefire Defense Center 750 Bedienungsanleitung

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Cisco

Cisco UCS 5100 Kurzanleitung

Cisco

Cisco UCS B200 Handbuch

Cisco

Cisco 1600 Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco ISE-3315 Bedienungsanleitung

Cisco

Cisco 3500 Series Bedienungsanleitung

Cisco

Cisco SNS-3415 series Bedienungsanleitung

Cisco

Cisco C880 Series Montageanleitung

Cisco

Cisco UCS Invicta C3124SA Bedienungsanleitung

Cisco

Cisco UCS 5100 Bedienungsanleitung

Cisco

Cisco APIC M3 Montage- und Wartungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung