Cisco Aironet 2800 series Kurzanleitung

Choosing the Right Access Point

•Models, page 1

•Part Numbers and Descriptions , page 2

•Supported Code Versions Compatible with AP 2800 and AP 3800 , page 3

•Differences between the AP 2800 and AP 3800 Access Points, page 3

•Feature Differences, page 6

•Ports on the AP 2800 and AP 3800 , page 7

•Modularity and Smart Antenna Connector Ports , page 8

Models

The Cisco 2800 and 3800 Series Access Points target customers requiring support for mission-critical and

best in class applications. The 2800/3800 embodies ClientLink 4.0, an innovative antenna technology comprising

four transmit radios and four receive radios called 4x4 in a Multiple Input Multiple Output (MIMO)

configuration and supporting three spatial streams (3SS), together referenced as 4x4:3. Using this type of

antenna system along with additional Modulation Coding Scheme (MCS) rates supporting up to 256 QAM

and up to 160 MHz channel bonding, rates of up to 5 Gbps can be supported.

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

ClientLink 4.0 uses these features along with an additional antenna (N+1) to allow for beam-forming for all

802.11a/g/n/ac and now ac Wave-2 clients including those supporting 3 spatial streams.

Figure 1: Access Point Portfolio Placement

Access points are available in three models:

•Internal antennas version labeled “i”that has captured antennas (part of the housing and not removable).

The “i”series is designed for indoor Enterprise installations where office aesthetics are a primary concern.

•External antennas version labeled “e”that is more rugged and designed for industrial use in locations

such as hospitals, factories, and warehouses, anywhere a need exists for external antennas and/or extended

operating temperatures. The “e”version also supports mounting inside NEMA enclosures for use in the

most demanding environments.

•Access points for professional install are labeled “p”series and may be used in outdoor applications.

Part Numbers and Descriptions

DescriptionSKU

Single Unit; Internal Antenna ModelAIR-AP3802I-x-K9

10 pack; Internal Antenna ModelAIR-AP3802I-xK910

Single Unit; External Antenna ModelAIR-AP3802E-x-K9

10 pack; External Antenna ModelAIR-AP3802E-xK910

Single Unit; Internal Antenna Model; ConfigurableAIR-AP3802I-x-K9C

10 pack; Internal Antenna Model; ConfigurableAIR-AP3802I-xK910C

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Part Numbers and Descriptions

DescriptionSKU

Single Unit; External Antenna Model; ConfigurableAIR-AP3802E-x-K9C

10 pack; External Antenna Model; ConfigurableAIR-AP3802E-xK910C

Supported Code Versions Compatible with AP 2800 and AP 3800

The minimum versions supporting the AP 2800 and 3800 are:

•Wireless LAN Controller (WLC) AirOS release 8.2MR1

•Polaris release 16.3

•Prime release 3.1MR1

•MSE or CMX 10.2.2

•ISE 2.0

Differences between the AP 2800 and AP 3800 Access Points

The mechanical front of the AP 2800 and AP 3800 are nearly identical in physical appearance.

Figure 2: AP 2800 and AP 3800 (I and E) versions

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Supported Code Versions Compatible with AP 2800 and AP 3800

The AP 3800 is also available in a "P" version. The external antenna "E" versions permit antenna gains up to

6 dBi, "P" version up to 13 dBi.

Figure 3: AP 2800/3800

There are slight differences in the weight and thickness of the 2800 and 3800. The AP 3800 is a bit more

robust as it has support for mGig (NBASE-T) and optional module support. AP 2800 on left is smooth and

does not have heat fins.

Figure 4: AP 2800/3800 Dimensions

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Differences between the AP 2800 and AP 3800 Access Points

Depending on the model the thickness changes slightly.

Figure 5: AP 2800 and AP 3800 dimensions

The weight is slightly different between the models.AP 3800 both “E”and “P”versions as well as the

2800e is 2.1 kg.AP 3800i is 2.0 kg. AP 2800i is 1.6 kg.

Note

Both products use the same brackets as 2700/3700 2700/3700 Series Access Points–AIR-AP-BRACKET1

and AIR-AP-BRACKET-2.

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Differences between the AP 2800 and AP 3800 Access Points

Feature Differences

Here is a basic feature comparison:

Figure 6: Feature comparisons of 2800 and 3800 series

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Feature Differences

Ports on the AP 2800 and AP 3800

The AP 2800 is similar to the AP 3800 but lacks a local power supply input and mGig PoE port. Additionally,

the USB port is mounted sideways.

Figure 7: Ports on 2800 series

Figure 8: Ports on 3800 series

The AP 3800 has a local power supply jack on the right; This is a new style connector and is not compatible

with the older AIR-PWR-B power supplies used with the AP 2700 and AP 3700 series. For more on this

connector, see the powering section for details.

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Ports on the AP 2800 and AP 3800

In addition there is an mGig port as well as a port for external modules on the AP 3800.

Figure 9: External module port on the 3800 series

Modularity and Smart Antenna Connector Ports

The AP 3800 has modularity support that is a bit different from the original module design on the prior AP

3600 and AP 3700 series. This module design allows for installation onto the side of the access point. This

allows for larger antenna arrays and does not constrict the development of Cisco and potentially third party

modules as they are no longer limited by the physical size of the cccess point. Additionally, filtering is installed

on the AP 3800 for cellular and other radio coexistence.

The external antenna connectors on the "E" and "P" series are identical to the antenna connectors on previous

access points. There is no difference in operation when the access point is used in dual band (2.4 and 5 GHz)

operation. which is the default mode. RF coverage and cell sizes are similar to the previous AP 2700 and 3700

series so there is no need to do a new site survey.

Unlike the prior external antenna versions, the new 2800 and 3800 series Access Points now support the

capability of dual 5–GHz operation. When in this mode, a smart antenna connector must be used on the

external antenna models, as the additional 5–GHz radio cannot use the same top antennas on the access point

that are being used by the primary 5–GHz radio.

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Modularity and Smart Antenna Connector Ports

When a smart antenna connector is installed, the XOR radio (the radio that is defined in software as Radio 0)

now has its RF switched to the smart antenna connector.

Figure 10: External connector ports on AP 2800e and 3800e

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Modularity and Smart Antenna Connector Ports

Cisco Aironet Series 2800/3800 Access Point Deployment Guide

Choosing the Right Access Point

Modularity and Smart Antenna Connector Ports

Andere Handbücher für aironet 2800 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco WAP351 Bedienungsanleitung

Cisco

Cisco Aironet 1572EC Kurzanleitung

Cisco

Cisco Aironet 1850 Series Bedienungsanleitung

Cisco

Cisco Meraki MR46E Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Aironet 1520 Series Bedienungsanleitung

Cisco

Cisco Aironet 1240AG Series Handbuch

Cisco

Cisco Meraki Go GR60 Bedienungsanleitung

Cisco

Cisco Aironet 2802E Bedienungsanleitung

Cisco

Cisco AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access... Bedienungsanleitung

Cisco

Cisco 1700 series Handbuch

Cisco

Cisco Aironet 1400 Series Handbuch

Cisco

Cisco 1522AG - Aironet Lightweight Outdoor Mesh Access... Bedienungsanleitung

Cisco

Cisco Catalyst 9124AX Series Handbuch

Cisco

Cisco Catalyst Wireless 9162I Series Handbuch

Cisco

Cisco WAP200 - Small Business Wireless-G Access... Bedienungsanleitung

Cisco

Cisco Meraki MR55 Bedienungsanleitung

Cisco

Cisco Aironet 3800P Series Bedienungsanleitung

Cisco

Cisco Meraki MR20-HW Bedienungsanleitung

Cisco

Cisco Catalyst IW6300 Series Bedienungsanleitung

Cisco

Cisco MR18 Bedienungsanleitung

Cisco

Cisco Small Business AP541N Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

Cisco aironet 2800 series Kurzanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken