Cisco Aironet 3700 Series Kurzanleitung

Cisco Systems, Inc.

www.cisco.com

Cisco Aironet Series 2700/3700 Access Points

Deployment Guide

Last Updated: May, 2014

Cisco Aironet Series 3700 Access Point

Abstract

This section covers the Cisco 3700 Series Access Points theory of operation and installation as part of a

Cisco wireless LAN (WLAN) solution. Subjects related include:

•Choosing the right Access Point.

•Differences between AP 3700 and AP 3600.

•Feature module and ClientLink support.

•Physical/Hardware details, mounting options, bracket choices, and installation considerations.

•Antenna options, radiation patterns, and external antenna deployments.

•Understanding spatial streams, MCS rates and beam-forming (802.11n Primer).

•Review of 802.11ac and Wave-1 module for AP 3600.

•Understanding 802.11ac and Wave-1 for the AP 3700.

•Best Practices–Understanding Channel usage, 80 MHz, and available 11ac clients.

•802.11ac performance considerations.

This document is intended for trained and experienced technical personnel familiar with the existing

Cisco Wireless Networking Group (WNG) product line and features.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Choosing the Right Access Point

Models

The Cisco 3700 Series Access Point (AP 3700) targets customers requiring support for mission-critical

applications. The AP 3700 embodies ClientLink 3.0, an innovative antenna technology comprising four

transmit radios and four receive radios called 4X4 in a Multiple Input Multiple Output (MIMO)

configuration supporting 3 spatial streams (3SS) together referenced as 4x4:3. Using this type of antenna

system along with additional Modulation Coding Schemes (MCS rates supporting up to 256 QAM) and

80 MHz channel bonding, rates of up to 1.3 Gbps can be supported.

ClientLink 3.0–using these features along with an additional antenna (N+1)–allows for beam-forming

for all 802.11a/g/n clients (like ClientLink 2.0) and now beamforms to 11ac 3 spatial streams clients.

Figure 1 Access Point Portfolio Placement

Access Points are available in three models:

•Internal antennas version labeled “i” have captured antennas (part of the housing and not

removable). The “i” series is designed for indoor Enterprise installations where office aesthetics are

a primary concern.

•External antennas version labeled “e” are more rugged and designed for industrial use in locations,

such as hospitals, factories, warehouses, and anywhere a need exists for external antennas and/or

extended operating temperatures. The “e” version also supports mounting inside NEMA enclosures

for use in the most demanding environments.

•Access Points for Professional Installations are labeled “p” series and may be used in outdoor

applications.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 2 AP 3700 Models and Eco-Packs

Figure 3 AP 3600 Models and Eco-Packs

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Differences between the AP 3700 and AP 3600

The mechanical front of the AP 3700 and AP 3600 are similar in physical appearance with the exception

of the “industrial cuts” along the edges of the 3700 (left) and the deeper recess around the logo area. This

allows for easy visual identification of the different AP device types.

Figure 4 AP 3700 vs. AP 3600 (External Antenna Models)

Figure 5 AP 3700 and AP 3600 (Backside Identical)

The AP 3700e supports 802.11ac (Wave-1) native. This frees the feature module slot for additional

functionality while also permitting external antenna connections for 802.11ac data rates (w/AP 3700e).

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 6 Identifying APs Physically

Feature Module Support

AP 3700 and AP 3600 both have integrated support for option modules. The goal in supporting a modular

design is to offer a product that can provide longevity and true flexibility as technology changes. This

provides a real value protection for customers. It also provides Cisco with an opportunity to introduce

new features and functionality into a current stable platform.

The Wireless Security and Spread Spectrum Intelligence (WSSI) module adds new functionality to the

AP to future-proof customers' investment. This module provides a dedicated monitor radio to scan the

full spectrum (not just the channel on which the AP is operating). It will offload complete monitoring

and security services to the monitor module including CleanAir, WIDS/WIPS, Context-aware Location,

Rogue Detection, and Radio Resource Management (RRM). This module allows for full spectrum

analysis on all channels on both the 2.4 and 5 GHz bands.

Having a WSSI module avoids having the need to deploy a separate, dedicated overlay network for full

spectrum monitoring and eliminates the need for an extra cable pull and additional infrastructure costs

(Figure 7).

There is also an option module for the AP 3600 that provides 802.11ac (Wave-1) functionality. This

option cannot be used on the AP 3700 because it already has 802.11ac (Wave-1) integrated. This option

module for the AP 3600 will operate at 5GHz and allow the AP 3600 to fully support 802.11a/n along

with 802.11ac clients. Wave-1 functionality supports a 1.3 Gbps PHY / ~1 Gbps MAC (throughput)

using 3 spatial streams, 80 MHz, and 256 QAM. The option module does not support ClientLink 2.0 but

rather supports the Explicit beamforming specification that is part of the 802.11ac standard.

Look out for additional modules for 3/4G support and 802.11ac Wave-2.

Use of option modules may require local power supply, Cisco power injector, .3at PoE+, or the use of

Cisco Enhanced PoE, as the module typically increases the power draw to greater than 15.4W (.3af).

Note Cisco Enhanced PoE was created by Cisco and is the forerunner to 802.3at PoE+.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 7 Feature Module of the Bottom of the AP 3700 and AP 3600

Beamforming – Understanding ClientLink

The AP 3700 supports the new “ClientLink 3.0” and is able to beamform to 802.11ac clients including

1, 2, and 3 spatial streams. It also supports all ClientLink 2.0 functionality with legacy 11a/g clients and

802.11n 1, 2, and 3 spatial stream clients.

The AP 3600 supports ClientLink 2.0 which beamforms to legacy 11a/g clients and 11n 1, 2, 3 spatial

stream but does not support ClientLink 3.0 (Cisco beamforming method to 11ac clients).

Both the AP 3700 and AP 3600 with module supports the 802.11ac beamforming standard known as

ECBF (Explicit Compressed Beam Forming)–a new IEEE method of beamforming that is emerging but

not yet fully supported in 11ac clients. Cisco ClientLink is similar but can work with all clients today

including 11a/g/n as well as 11ac clients. ClientLink also takes advantage of the extra transceiver in the

AP, so it beamforms to clients with 3 spatial streams.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 8 ClientLink Feature Comparison

Both, the AP 3700 and AP 3600 support a 4x4:3 architecture. However, the AP 3600 with the module

only supports 11ac in a 3x3:3 mode and lacks the ability to beamform AC clients beyond 7 clients at a

time whereas, the AP 3700 can beamform 128 clients per radio interface.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 9 Feature Comparison of AP 3600 and AP 3700

APs Physical Hardware and Mounting Options

AP 1600, 2600, 3600, and 3700 have similar physical dimensions with a few differences in physical

appearance, most of which are cosmetic changes to distinguish the different models. The mounting

options and bracket configurations are identical and interchangeable.

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

Figure 10 Mechanical Drawing of APs 1600, 2600, and 3600

Figure 11 3700 Mechanical Drawing

There are many different installation options available depending upon the requirements of the customer.

Brackets are available from Cisco as well as third-party companies. During the ordering process, the

customer may choose one of two brackets (but not both). Each bracket is a zero-dollar ($0) option at the

Cisco Aironet Series 2700/3700 Access Points Deployment Guide

Cisco Aironet Series 3700 Access Point

time of configuration. If the customer does not choose a bracket, the selection default is

AIR-AP-BRACKET-1, which is the most popular for ceiling installations. The other choice is a universal

bracket that carries part number AIR-AP-BRACKET-2 (Figure 12).

Figure 12 Access Point Bracket Choices - If You Are Using the AP 3600 Module, We Recommend

AIR-AP-Bracket-2

If the AP needs to be mounted directly to a ceiling on the gridwork, then AIR-AP-BRACKET-1 is

mounted flush and has the lowest profile. However, if the AP is mounted to an electrical box or other

wiring fixture, or inside a NEMA enclosure or perhaps wall mounted, then AIR-AP-BRACKET-2 is a

better choice. The extra space in the bracket allows for wiring, and the extra holes line up with many

popular electrical boxes. When mounting the bracket to the ceiling gridwork, some ceiling tiles are

recessed. For this reason, two different styles of ceiling clips, recessed and flush rails, are available

(Figure 13).

Figure 13 Different Clips are Available for Attaching to Ceiling Grid Work

Channel Rail Adapters - Cisco Part Number AIR-CHNL-ADAPTER

When mounting APs to ceiling channel rails such as the ones shown in Figure 14, an optional channel

adapter is used, AIR-CHNL-ADAPTER. It comes in a two-pack and attaches to the ceiling grid clip

shown above. Refer to Figure 14 and Figure 15.

Andere Handbücher für Aironet 3700 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Cisco

Cisco WAP371 Bedienungsanleitung

Cisco

Cisco WAP150 Bedienungsanleitung

Cisco

Cisco Meraki MR36-HW Handbuch

Cisco

Cisco AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access... Bedienungsanleitung

Cisco

Cisco 1130AG - Aironet - Wireless Access Point Handbuch

Cisco

Cisco Meraki GR10 Bedienungsanleitung

Cisco

Cisco Meraki MR53E Bedienungsanleitung

Cisco

Cisco Aironet 1540 Series Handbuch

Cisco

Cisco ISR Bedienungsanleitung

Cisco

Cisco Catalyst Wireless 9162I Series Handbuch

Cisco

Cisco Meraki MR36 Bedienungsanleitung

Cisco

Cisco Linksys WAP54GX Original Betriebsanleitung

Cisco

Cisco MERAKI MR46E-HW Handbuch

Cisco

Cisco WAP200 - Small Business Wireless-G Access... Bedienungsanleitung

Cisco

Cisco Aironet 1530 Series Handbuch

Cisco

Cisco Catalyst IW6300 Series Bedienungsanleitung

Cisco

Cisco Wap581 Bedienungsanleitung

Cisco

Cisco 1700 series Handbuch

Cisco

Cisco Linksys WAP54G LA Bedienungsanleitung

Cisco

Cisco 1232AG - Aironet - Wireless Access Point Handbuch

Cisco

Cisco WAP125 Bedienungsanleitung

Cisco

Cisco aironet 2800 series Kurzanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung