Cisco Small Business WAP551 Bedienungsanleitung

Cisco Small Business

WAP551 Wireless-N Access Point with PoE

and

WAP561 Wireless-N Selectable-Band Access Point with PoE

ADMINISTRATION

GUIDE

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 1

Contents

Chapter 1: Getting Started 5

Starting the Web-Based Configuration Utility 5

Using the Access Point Setup Wizard 6

Getting Started 9

Window Navigation 10

Chapter 2: Status and Statistics 12

System Summary 12

Network Interfaces 14

Traffic Statistics 15

WorkGroup Bridge Transmit/Receive 16

Associated Clients 16

TSPEC Client Associations 18

TSPEC Status and Statistics 20

TSPEC AP Statistics 22

Radio Statistics 22

Email Alert Status 24

Log 24

Chapter 3: Administration 25

System Settings 26

User Accounts 26

Time Settings 28

Log Settings 30

Email Alert 32

HTTP/HTTPS Service 35

Management Access Control 37

Manage Firmware 38

Download/Backup Configuration File 40

Configuration Files Properties 42

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 2

Contents

Copy/Save Configuration 42

Reboot 43

Discovery—Bonjour 44

Packet Capture 44

Support Information 51

Chapter 4: LAN 52

Port Settings 52

VLAN and IPv4 Address Settings 53

IPv6 Addresses 54

IPv6 Tunnel 56

Chapter 5: Wireless 58

Radio 58

Rogue AP Detection 66

Networks 69

Scheduler 81

Scheduler Association 83

Bandwidth Utilization 83

MAC Filtering 84

WDS Bridge 85

WorkGroup Bridge 89

Quality of Service 92

Chapter 6: System Security 105

RADIUS Server 105

802.1X Supplicant 107

Password Complexity 109

WPA-PSK Complexity 110

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 3

Contents

Chapter 7: Client Quality of Service 111

Client QoS Global Settings 111

ACL 111

Class Map 118

Policy Map 123

Client QoS Association 125

Client QoS Status 127

Chapter 8: Simple Network Management Protocol 129

General SNMP Settings 129

Groups 133

Users 135

Targets 136

Chapter 9: Captive Portal 138

Captive Portal Global Configuration 139

Instance Configuration 140

Instance Association 143

Web Portal Customization 143

Local Groups 147

Local Users 148

Authenticated Clients 149

Failed Authentication Clients 150

Chapter 10: Single Point Setup 152

Single Point Setup Overview 152

Access Points 157

Sessions 160

Channel Management 161

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 4

Contents

Wireless Neighborhood 165

Chapter A: Deauthentication Message Reason Codes 168

Deauthentication Reason Code Table 168

Appendix B: Where to Go From Here 170

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 5

Getting Started

This chapter provides an introduction to the Wireless Access Point (WAP) devices web-based

configuration utility, and includes these topics:

• Starting the Web-Based Configuration Utility

• Using the Access Point Setup Wizard

• Getting Started

• Window Navigation

Starting the Web-Based Configuration Utility

This section describes system requirements and how to navigate the web-based configuration

utility.

Supported Browsers

•Internet Explorer 7.0 or later

•Chrome 5.0 or later

•Firefox 3.0 or later

•Safari 3.0 or later

Browser Restrictions

•If you are using Internet Explorer 6, you cannot directly use an IPv6 address to access

the WAP device. You can, however, use the Domain Name System (DNS) server to

create a domain name that contains the IPv6 address, and then use that domain name in

the address bar in place of the IPv6 address.

•When using Internet Explorer 8, you can configure security settings from Internet

Explorer. Select Tools > Internet Options and then select the Security tab. Select Local

Intranet and select Sites. Select Advanced and then select Add. Add the intranet

address of the WAP device (http://<ip-address>) to the local intranet zone. The IP

Getting Started

Starting the Web-Based Configuration Utility

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 6

address can also be specified as the subnet IP address, so that all addresses in the

subnet are added to the local intranet zone.

•If you have multiple IPv6 interfaces on your management station, use the IPv6 global

address instead of the IPv6 local address to access the WAP device from your browser.

Launching the Web-Based Configuration Utility

To open the web-based AP configuration utility:

STEP 1 Open a web browser.

Enter the IP address of the WAP device that you are configuring in the address bar on the

browser and then press Enter. The Login page opens.Login

•To find your IP address, you can use the Cisco FindIT Network Discovery Utility. This

tool enables you to automatically discover all supported Cisco Small Business devices

in the same local network segment as your computer. For more information, go to

cisco.com and enter www.cisco.com/go/findit.

Getting Started

Starting the Web-Based Configuration Utility

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 7

•For further instructions on how to locate the IP address of your WAP device, see the

WAP device Quick Start Guide.

STEP 2 Enter the user name and password. The factory default user name is cisco and the default

password is cisco.

STEP 3 Click Log In. The Access Point Setup Wizard page opens.

If this is the first time that you logged on with the default user name (cisco) and the default

password (cisco) or your password has expired, the Change Admin Password page opens.

Enter the new password and confirm it, click Apply, and then click Close. The new password

is saved. Then, enter the user name cisco and the new password on the Login page.

Access Point Startup Wizard

See Using the Access Point Setup Wizard for instructions on using the wizard.

Getting Started

Using the Access Point Setup Wizard

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 8

Logging Out

By default, the web-based AP configuration utility logs out after 10 minutes of inactivity. See

HTTP/HTTPS Service for instructions on changing the default timeout period.

To log out, click Logout in the top right corner of the web-based AP configuration utility.

Using the Access Point Setup Wizard

The first time that you log into the WAP device (or after it has been reset to the factory default

settings), the Access Point Setup Wizard appears to help you perform initial configurations.

Follow these steps to complete the wizard:

NOTE If you click Cancel to bypass the Wizard, the Change Password page appears. You can then

change the default password for logging in. For all other settings, the factory default

configurations apply.

You must log in again after changing your password.

Getting Started

Using the Access Point Setup Wizard

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point 9

STEP 1 Click Next on the Welcome page of the Wizard. The Configure Device - IP Address window

appears.

Access Point Setup Wizard—IP Address

STEP 2 Click Dynamic IP Address (DHCP) if you want the WAP device to receive an IP address from

a DHCP server. Or select Static IP Address to configure IP Address manually. For a

description of these fields, see VLAN and IPv4 Address Settings.

STEP 3 Click Next. The Single Point Setup — Set a Cluster window appears. For a description of

Single Point Setup, see Single Point Setup.

Andere Handbücher für Small Business WAP551

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Drahtloser Zugangspunkt Handbücher

Cisco

Cisco AP-702W Kurzanleitung

Cisco

Cisco Small Business WAP551 Bedienungsanleitung

Cisco

Cisco Aironet 3500 Series Bedienungsanleitung

Cisco

Cisco aironet 2800 series Kurzanleitung

Cisco

Cisco Aironet 1400 Series Bedienungsanleitung

Cisco

Cisco AIR-AP1220B-A-K9 - Aironet 1200 - Wireless Access... Handbuch

Cisco

Cisco WAP121 Bedienungsanleitung

Cisco

Cisco 800 Series Bedienungsanleitung

Cisco

Cisco MERAKI MR66 Bedienungsanleitung

Cisco

Cisco GR10-HW-EU Bedienungsanleitung

Cisco

Cisco AIR-MP20B Bedienungsanleitung

Cisco

Cisco Aironet 1700 Kurzanleitung

Cisco

Cisco Meraki MR70 Bedienungsanleitung

Cisco

Cisco 15454-GBIC-LX= - 1000 Mbps GBIC Expansion... Handbuch

Cisco

Cisco 1700 series Handbuch

Cisco

Cisco WAP300N Bedienungsanleitung

Cisco

Cisco AIR-AP1542I-*-K Bedienungsanleitung

Cisco

Cisco WAP125 Bedienungsanleitung

Cisco

Cisco Catalyst 9164 Series Bedienungsanleitung

Cisco

Cisco Aironet 1200 Series Handbuch

Cisco

Cisco Aironet 521 Bedienungsanleitung

Cisco

Cisco Meraki MR42 Bedienungsanleitung

Cisco

Cisco Linksys WET610N Bedienungsanleitung

Cisco

Cisco AIR-CAP3502I-A-K9 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung