Cisco Linksys E2100 Bedienungsanleitung

Linksys E2100 Router Setup Guide

Configure QoS Settings (MAC Method)

1. Log in to the router. The default IP address is 192.168.1.1.

2. The default username is “admin”. The default password is “admin”.

3. Click the Applications & Gaming tab.

For field descriptions, click Help on the right side of the screen.

4. Select QoS.

5. Select the radial button “Enabled” next to the field labeled “Internet Access Priority”.

6. In the field labeled “Upstream Bandwidth”, select “Manual” from the drop-down menu and enter your current upload speed. (If unsure of your

current upload speed, please run a speed test at http://www.megapath.com/speedtestplus/.

7. Select “MAC Address” from the drop-down menu labeled “Category”.

8. You will need the MAC address for each IP device to continue. In the field labeled “Enter a Name”, enter a unique name for the device for

which you will prioritize traffic.

9. In the field labeled “MAC Address” enter the MAC address for the device.

Polycom VVX 500

10. In the field labeled “Priority”, select “High” from the drop-down menu.

11. Click “Apply” to save changes.

Polycom VVX 500

12. Repeat steps 6-10 until you have entered all of the IP phones. When all have been entered and you see them in the “Summary” section, click on

“Save Settings”.

13. Power cycle/reboot the router before proceeding.

Polycom VVX 500

Configure QoS Settings (MAC Method)

1. Log in to the router. The default IP address is 192.168.1.1.

2. The default username is “admin”. The default password is “admin”. 2.

3. Click the “Applications & Gaming” tab.

4. Select “QoS”.

5. Select the radial button “Enabled” next to the field labeled “Internet Access Priority”.

6. In the field labeled “Upstream Bandwidth”, select “Manual” from the drop-down menu and enter your current upload speed. (If unsure of your

current upload speed, please run a speed test at http://www.megapath.com/speedtestplus/.

7. In the “Category” section, select “Applications” from the drop-down menu.

8. In the field labeled “Applications”, select “Add a New Application” from the drop-down menu.

9. Enter a unique name in the “Enter a Name” field. Enter the following port ranges and select “UDP” from the drop-down menu to the right of

each port range field and set the priority to “High” on the drop-down menu: 5060-5090, 8000-8200, 16384-16482.

MegaPath

Andere Cisco WLAN-Router Handbücher

Cisco

Cisco WRT54G2 Linksys Bedienungsanleitung

Cisco

Cisco WRT320N - Wireless-N Gigabit Router Wireless Bedienungsanleitung

Cisco

Cisco UBR7246VXR Bedienungsanleitung

Cisco

Cisco Small Business WRP400 Originalbetriebsanleitung

Cisco

Cisco Universal Broadband Router Cisco uBR10012 Bedienungsanleitung

Cisco

Cisco ASR 9000 Series Bedienungsanleitung

Cisco

Cisco WRT610N - Simultaneous Dual-N Band Wireless... Bedienungsanleitung

Cisco

Cisco SRP521W Bedienungsanleitung

Cisco

Cisco Linksys X-Series Bedienungsanleitung

Cisco

Cisco Linksys X1000 Bedienungsanleitung

Cisco

Cisco 876W - Integrated Services Router Wireless Bedienungsanleitung

Cisco

Cisco MWR 1941-DC - 1941 Mobile Wireless Router Bedienungsanleitung

Cisco

Cisco UBR7225VXR Bedienungsanleitung

Cisco

Cisco 927 4P LTE Bedienungsanleitung

Cisco

Cisco Linksys E3200 Bedienungsanleitung

Cisco

Cisco RV180 Bedienungsanleitung

Cisco

Cisco Catalyst IR1800 Rugged Series Bedienungsanleitung

Cisco

Cisco WAP54GP - Wireless-G Access Point Bedienungsanleitung

Cisco

Cisco 3825 Series Bedienungsanleitung

Cisco

Cisco Linksys RT31P2 Original Betriebsanleitung

Cisco

Cisco DPC3827 Bedienungsanleitung

Cisco

Cisco RV340W Bedienungsanleitung

Cisco

Cisco Linksys SE1500 Bedienungsanleitung

Cisco

Cisco MWR-1900-27 Originalbetriebsanleitung

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung