Clarion DB225 DB225 DB225 Bedienungsanleitung

DB225 2

English

1. When the inside of the car is very cold and

the player is used soon after switching on

the heater, moisture may form on the disc

or the optical parts of the player and proper

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft

cloth. If moisture forms on the optical parts

of the player, do not use the player for about

one hour and the condensation will disap-

pear naturally to allow normal operation.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the

sound to skip.

3. This unit uses a precision mechanism.

Even in the event that trouble arises, never

open the case, disassemble the unit, or

lubricate the rotating parts.

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reason-

able protection against harmful interference in

a residential installation. This equipment gen-

erates, uses, and can radiate radio frequency

energy and, if not installed and used in accor-

dance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interfer-

ence will not occur in a particular installation. If

this equipment does cause harmful interfer-

ence to radio or television reception, which can

be determined by turning the equipment off

and on, the user is encouraged to consult the

dealer or an experienced radio/TV technician

for help.

1. PRECAUTIONS

Bottom View of Source Unit

Printed in Malaysia / Imprimé à Malaisie / Impreso en Malasia

2001/9 (D•M)

Clarion Co., Ltd.

PE-2420B

280-7643-01

Owner’s manual

Mode d’emploi

Manual de instrucciones

AM/FM CD PLAYER

•

RADIO AM/FM-LECTEUR CD

•

RADIO AM/FM Y REPRODUCTOR CD

■Contents

English

1. PRECAUTIONS...........................................................2

2. CONTROLS.................................................................3

3. BUTTON TERMINOLOGY..........................................4

4. FEATURES..................................................................5

5. HANDLING COMPACT DISCS...................................6

6. DCP (Detachable Control Panel)..............................7

7. OPERATION................................................................8

8. TROUBLESHOOTING ..............................................12

9. ERROR DISPLAYS...................................................13

10.SPECIFICATIONS.....................................................14

■Table des matières

Français

1. PRÉCAUTIONS.........................................................15

2. COMMANDES.............................................................3

3. NOMENCLATURE DES TOUCHES.........................16

4. CARACTÉRISTIQUES..............................................17

5. MANIPULATION DES DISQUES COMPACTS ........18

6. CLAVIER DE COMMANDE AMOVIBLE (DCP).......19

7. FONCTIONNEMENT.................................................20

8. DÉPISTAGE DES PANNES......................................24

9. AFFICHAGE DES ERREURS...................................25

10.SPÉCIFICATIONS.....................................................26

■Índice

Español

1. PRECAUCIONES......................................................27

2. CONTROLES..............................................................3

3. NOMENCLATURA DE LOS BOTONES...................28

4. CARACTERÍSTICAS ................................................29

5. MANEJO DE LOS DISCOS COMPACTOS..............30

6. PANEL DE CONTROL DESMONTABLE (DCP)......31

7. OPERACIÓN.............................................................32

8. SOLUCIÓN DE PROBLEMAS..................................36

9. INDICACIONES DE ERROR ....................................37

10.ESPECIFICACIONES ...............................................38

CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL

VIOLATE FCC APPROVAL.

INFORMATION FOR USERS:

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

CAUTION

Be sure to unfold and read the next page.

Veuillez déployer et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

DB225

280-7643-01

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déployer cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

3DB225 4DB225

English

CONTROLS / COMMANDES / CONTROLES

SOURCE UNIT / APPAREIL PILOTE / UNIDAD FUENTE

DISPLAY

AFFICHEUR

VISUALIZADOR

CD Insertion Slot

Fente d’insertion de CD

Ranura de inserción del disco compacto

1 32 4 5

789 6@$ # !

¥

English Français Español

DB225 41

Note:

•

Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

1DCP Release Button

2Volume Knob

3Eject (Q) Button

4POWER Button

FNC (Function) Button

5Z-EHCR (Z-enhancer) Button

6AS (Auto Store) Button

7PS (Preset Scan) Button

8Play/Pause (s) Button

9DISP (Display) Button

0BND (Band) Button

TOP Button

!RDM (Random) Button

@A-M (Audio Mode) Button

#RPT (Repeat) Button

$SCN (Scan) Button

%Preset Buttons (1 to 6)

¥SRCH (Search) Up and Down ( and ) Buttons

3. BUTTON TERMINOLOGY

Note: The above illustration shows the front panel of the model DB225.

Remarque: L’illustration ci-dessous montre le panneau avant du modèle

DB225.

Nota: La ilustración de arriba muestra el panel frontal del modelo DB225.

English

DB225 5

■Rotary Encoder Volume Control

■DIN Chassis with Detachable Control Panel (1DIN, Full DCP feature)

■Z-Enhancer with 3 Mode Sound Selector

■®FM Reception System

■Seek / Manual Up / Down Tuning

■8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters

■Preset Station Scan (PS), Automatic Store (AS)

■2-Channel RCA Line Level Output

■AM 1 band, FM 4 bands each 5 channels total 25 channels, Preset Memory Function

■Repeat/Random Play/Intro Music Scan

■200W (50 W ×4) Maximum Power Output

4. FEATURES

6DB225

English

5. HANDLING COMPACT DISCS

This unit has been designed specifically for play-

back of compact discs bearing the mark.

No other discs can be played.

Single CD (8cm) cannot be played with the unit.

To remove the compact disc from its storage

case, press down on the center of the case and

lift the disc out, holding it carefully by the edges.

Always handle the compact disc by the edges.

Never touch the surface.

To remove fingermarks and dust, use a soft

cloth, and wipe in a straight line from the center

of the compact disc to the circumference.

New discs may have some roughness around

the edges. The unit may not work or the sound

may skip if such discs are used. Use a ball-point

pen, etc. to remove roughness from the edge of

the disc.

Note on Compact Discs

Never stick labels on the surface of the compact

disc or mark the surface with a pencil or pen.

Do not use any solvents such as commercially

available cleaners, anti-static spray, or thinner to

clean compact discs.

Do not use compact discs that have large

scratches, are misshapen, or cracked, etc. Use

of such discs will cause misoperation or damage.

Do not expose compact discs to direct sunlight

or any heat source.

Ball-point pen

Roughness

Proper way to hold

the compact disc

Removing the disc

Note:

•

Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These

may get caught in the internal mechanism and damage the disc.

DB225 7

English

6. DCP (Detachable Control Panel)

The control panel can be detached to prevent

theft. We recommend taking the DCP with you

when leaving the car.

Removing the DCP

1. Turn off the power.

2. Press the DCP Release button 1.

CAUTION

DCP release button

DCP

3. Remove the DCP.

Attaching the DCP

1. Insert the side of the DCP into the main unit.

2. Insert the left side of the DCP into the main

unit.

Do not insert the DCP from the left side. Doing so

may damage it.

•The DCP can easily be damaged by shocks. After

removing it, place it in a protective case and be

careful not to drop it or subject it to strong shocks.

•When the release button is pressed and the DCP is

unlocked, the car’s vibrations may cause it to fall.

To prevent damage to the DCP, always store it in a

protective case after detaching it.

•The rear connector that connects the source unit

and the DCP is an extremely important part. Be

careful not to damage it by pressing on it with fin-

gernails, pens, screwdrivers, etc.

DCP Rear Panel Source Unit Front

Source unit connector

DCP

connector

Note:

•

If the DCP is dirty, wipe off with a soft, dry cloth only.

8DB225

English

Basic Operations

When this unit is turned on, starting and stop-

ping the engine of a car with its volume raised

to the maximum level may harm your hearing.

Be careful about adjusting the volume.

Turning ON the Power and Adjusting

the Volume

1) Press the POWER button 4.

*To turn off the power, press the POWER button

4for 1 second or longer.

2) Press the FNC button 4and select another

operation mode. Every time the FNC button

4is pressed, the display changes the oper-

ation mode as:

Radio ➜CD ➜Radio

Note:

•

If the CD mode is selected when no disc is inserted,

the display flashes “

DISC

” and blinking.

3) Turning the Rotary knob 2clockwise

increases the volume; turning it counterclock-

wise decreases the volume.

*The volume level is from 0 (minimum) to 33 (max-

imum).

Audio Mode Adjustments

Press the A-M button @to select the adjustment

mode. The mode switches as follows each time

the A-M button is pressed:

BASS ➜TREB ➜BAL ➜FAD ➜Previous

mode

Adjusting the Bass

1) Press A-M button @and select “BAS”.

2) Turning the Rotary knob 2clockwise empha-

sizes the bass; turning it counterclockwise

attenuates the bass.

*The factory default setting is “0”. (Adjustment

range: –6 to +6)

3) When the adjustment is complete, press A-M

button @several times until the function

mode is reached.

Adjusting the Treble

1) Press A-M button @and select “TRE”.

2) Turning the Rotary knob 2clockwise empha-

sizes the treble; turning it counterclockwise

attenuates the treble.

*The factory default setting is “0”. (Adjustment

range: –6 to +6)

3) When the adjustment is complete, press A-M

button @several times until the function

mode is reached.

Adjusting the Balance

1) Press A-M button @and select “BAL”.

2) Turning the Rotary knob 2clockwise empha-

sizes the sound from the right speaker; turn-

ing it counterclockwise emphasizes the sound

from the left speaker.

*The factory default setting is “0”. (Adjustment

range: L9 to r9)

3) When the adjustment is complete, press A-M

button @several times until the function

mode is reached.

Adjusting the Fader

1) Press A-M button @and select “FAD”.

2) Turning the Rotary knob 2clockwise empha-

sizes the sound from the front speakers; turn-

ing it counterclockwise emphasizes the sound

from the rear speakers.

*The factory default setting is “0”. (Adjustment

range: F9 to r9)

3) When the adjustment is complete, press A-M

button @several times until the function

mode is reached.

Note:

•

Bass and Treble can only be adjusted when the

“

Z-enhancer

” is off.

7. OPERATION

CAUTION

Note:

•

Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

DB225 9

English

Setting the Z-enhancer

This unit comes with three types of sound tone

effects stored in memory. Select the one you prefer.

*The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button 5, the

tone effect changes in the following order.

“Z-ENHANCER 1” ➜“Z-ENHANCER 2” ➜

“Z-ENHANCER 3” ➜“Z-EHCR OFF” ➜

“Z-ENHANCER 1”...

• Z-ENHANCER 1: bass emphasized

• Z-ENHANCER 2: treble emphasized

• Z-ENHANCER 3: bass and treble emphasized

• Z-EHCR OFF: no sound effect

Switching the Clock Display

Press and hold the BND button 0, and then

press the DISP button 9to swith between the

operation mode and the clock display.

Setting the Clock

1) Press and hold the BND button 0, and then

press the DISP button 9to display the clock

display.

2) Press and hold the BND button 0, and then

press the DISP button 9for 2 seconds or

longer.

3) Press the SRCH Up button ¥, then set the

current hour.

4) Press the SRCH Down button ¥, then set

the current minute.

5) Press the BND button 0, then the clock is

set.

Notes:

•

If you select another operation mode while you are

setting the clock, the clock setting operation will be

canceled.

•

If you remove the vehicle’s battery for a check or

repair, the clock will be reset, so you must set it again.

Radio Mode Operations

FM Reception

For enhanced FM performance the ®

tuner includes signal actuated stereo control and

Multipath noise reduction circuits.

Listening to the Radio

1) Press the FNC button 4to select the radio

mode, then the radio will be on.

2) To select a preset band, press the BND but-

ton 0, then select one of the preset bands

such as FM1, FM2, FM3, FM4, or AM. Every

time the BND button 0is pressed, the dis-

play will change as:

3) Press the SRCH Up/Down button ¥, then

the station at which there is a broadcast will

be selected (Seek selection).

Manual Tuning

1) Press the BND button 0, then select FM1,

FM2, FM3, FM4 or AM.

2) Press and hold the BND button 0for 2 sec-

onds or longer, then the display will show

“MANU”, which means that a manual selec-

tion function is on.

3) Press the SRCH Up/Down button ¥and

select the right station.

Seek Tuning

1) Press the BND button 0, then select FM1,

FM2, FM3, FM4 or AM.

2) If the “MANU” on the display is on, press and

hold the BND button 0for 2 seconds or

longer. When the “MANU” display is off, the

Seek Selection function is on.

3) Press the SRCH Up/Down button ¥, then

when it selects the station in which there is a

broadcast, it automatically stops.

FM1 FM2 FM3 FM4 AM

10 DB225

English

Preset Memory Function

Preset Memory Function can store up to 25 sta-

tions: five stations for each of FM1, FM2, FM3,

FM4 and AM.

Note:

•

When the present memory function is used, all the

content of the memory will be erased.

Manual memory function

1) Press the BND button 0, and select the

band you want to store in the memory.

2) Press the SRCH Up/Down button ¥then

select the station you want to store in the

memory.

3) Press and hold the Preset button %for 2

seconds or longer, then the station will be

stored in the memory.

Auto store function (Automatic Station Store)

1) Press the BND button 0, then select the

band you want to store in the memory.

2) Press and hold the AS button 6for 2 sec-

onds or longer, then the station at which the

reception is the strongest will be automatical-

ly stored in the memory.

Note:

•

When the number of stations stored is less than five,

the previous content of the memory for each direct

button will be retained.

Preset Scanning (Preset Station Scan)

When the PS button 7is preset, the preset

memory numbers flash and the stations are

tuned in for 7 seconds each in the order in which

they were stored. Press the PS button again to

cancel the preset scanning mode.

CD Mode Operations

Loading a Disc

Insert a CD into the centre CD insertion slot with

the labeled side facing up, “LOAD” appears in

the display, the CD enters inito the slot and start

playing.

Notes:

•

Single CD (3

”

(8 cm)), cannot be played with the unit.

•

Do not put your hand, fingers, or foreign objects into

the CD insertion slot.

•

If a CD has already been loaded, another CD cannot

be inserted. Do not insert another one forcefully.

•

Discs not bearing the mark cannot be played

with the unit. CD-ROMs cannot be played.

•

Some CDs recorded in CD-R mode may not be

usable.

•

CD recorded in CD-RW mode cannot be played with

the unit

Listening to the Disc already Inserted

Press the FNC button 4to select the CD mode,

the CD will start playing.

Stopping (pausing) Playback

While the CD playing, pressing the Play/Pause

button 8will stop the CD and “PAUS” indicate.

Press the Play/Pause button 8again to resume

playback.

Ejecting the CD

Press the Eject button 3, then the CD will be

ejected.

Note:

•

If the ejected CD is left as it is, it will be reloaded after

15 seconds.

Top Function

Press the TOP button 0, then the CD will start

playing from the first song (track number 1).

Selecting Tracks (songs)

Press the SRCH Up/Down button ¥.

: Playback will start from the next track.

: Playback will start from the beginning of

the track currently playing. When this

button is pressed again, the CD will play

from the previous track.

DB225 11

English

Fast-Forward and Fast-Backward

Press and hold the SRCH Up/Down button ¥.

: To fast-forward

: To fast-backward

*Pressing the SRCH Up/Down button for 1 second or

longer will move forward or backward 5 times faster

than normal play, and pressing it for 3 seconds or

longer will do the operation 30 times faster.

Scan Play (Intro Music Scan)

Press the SCN button $, then the display

shows “SCN”, then the CD will play the first 10

seconds of each track of the whole disc. Press

the SCN button $again to disengage the unit

from scan play.

*A scan play will start from the track following the one

currently.

Repeat Play

Press the RPT button #, then the display shows

“RPT”, then the track currently playing will be

played repeatedly. Press the RPT button #

again to disengage the unit from repeat play.

Random Play

Press the RDM button !, then the display will

show “RDM”, then the entire tracks on the disc

will be played at random. Press the RDM button

!again to disengage the unit from random play.

Switching between CD Play Time,

Clock Display and CDTrack Number

Press and hold the BND button 0, and then

press the DISP button 9, the display changes in

the following order:

CD Track No. CD Play Time

Clock Display

12 DB225

English

Reset button

Problem Cause Solution

Power does not turn on.

(No sound is produced.) Fuse is blown. Replace with a fuse of the same

amperage. If the fuse blows again,

consult your store of purchase.

Incorrect wiring. Consult your store of purchase.

Compact disc cannot be

loaded. Another compact disc is

already loaded. Eject the compact disc before loading

the new one.

Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft

cloth.

Compact disc is heaviiy

scratched or warped. Replace with a compact disc with no

scratches.

Sound is bad directly after

power is turned on. Water droplets may form

on the internal lens when

the car is parked in a

humid place.

Let dry for about 1 hour with the

power on.

Nothing happens when

buttons are pressed.

Display is not accurate.

Microprocessor has

malfunctioned due to

noise, etc.

Turn off the power, then press the

DCP Release button 1and remove

the DCP.

Press the reset button for about 2

seconds with a thin rod.

DCP or source unit

connectors are dirty. Wipe the dirt off with a soft cloth

moistened with cleaning alcohol.

8. TROUBLESHOOTING

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarion Autoradiosystem Handbücher

Clarion

Clarion CD037RMP Bedienungsanleitung

Clarion

Clarion CDC5030 Bedienungsanleitung

Clarion

Clarion NX501 Reparaturanleitung

Clarion

Clarion rdx665dz Bedienungsanleitung

Clarion

Clarion DXZ758RMC Bedienungsanleitung

Clarion

Clarion DXZ645MP Bedienungsanleitung

Clarion

Clarion VRX775VD Reparaturanleitung

Clarion

Clarion DXZ465MP Montageanleitung

Clarion

Clarion iDXZ378RMP Bedienungsanleitung

Clarion

Clarion Net DXZ638RMP Bedienungsanleitung

Clarion

Clarion DB158R Bedienungsanleitung

Clarion

Clarion DXZ776usb Bedienungsanleitung

Clarion

Clarion CX501E Bedienungsanleitung

Clarion

Clarion DRX9255 Bedienungsanleitung

Clarion

Clarion MAX67SVD Reparaturanleitung

Clarion

Clarion CZZ09 Bedienungsanleitung

Clarion

Clarion VS735 Bedienungsanleitung

Clarion

Clarion FZ105BT Betriebsanleitung

Clarion

Clarion PU-9836A Bedienungsanleitung

Clarion

Clarion ARX4570 Bedienungsanleitung

Clarion

Clarion CDI500R Bedienungsanleitung

Clarion

Clarion ProAudio ARX7570z Bedienungsanleitung

Clarion

Clarion ProAudio ARX7570z Bedienungsanleitung

Clarion

Clarion DXZSBSUS8 Bedienungsanleitung

Beliebte Autoradiosystem Handbücher anderer Marken

JL Audio

JL Audio Stealthbox SB-CAN-G2MVX3D/10TW3 Bedienungsanleitung

Sony

Sony MEX-BT5750U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AR0M Bedienungsanleitung

Sony

Sony RM-X7BT Bedienungsanleitung

Insignia

Insignia NS-HD5113 Bedienungsanleitung

USA SPECS

USA SPECS PA11-VW6 Bedienungsanleitung

Sony

Sony MEX-N4380BT Bedienungsanleitung

Kenwood

Kenwood KCD-BT6544U/UY Bedienungsanleitung

JVC

JVC KD-DB912BT Bedienungsanleitung

Philips

Philips CSQ405/98 Bedienungsanleitung

Alpine

Alpine TDM-7544 Bedienungsanleitung

Autotek

Autotek TransAm TA 1400 Bedienungsanleitung

Denso TEN

Denso TEN FT0108A Bedienungsanleitung

Pyle

Pyle PLD57MU Bedienungsanleitung

Harman

Harman Chrysler Radio Navigation System RB4 Bedienungsanleitung

JVC

JVC KW-R910BT Bedienungsanleitung

Eclipse

Eclipse CD2000 Bedienungsanleitung

JVC

JVC KD-G525 Bedienungsanleitung