Clarke CESNG2 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0914

ELECTRIC STAPLER & NAILER

MODEL NO: CESNG2

PART NO: 6462562

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

For safe operations:

1. Keep work area clean. - Cluttered areas and benches invite injuries.

2. Consider work area environment. - Do not expose power tools to rain. Do

not use power tools in damp or wet locations. Keep work area well lit. Do

not use power tools where there is risk to cause fire or explosion.

3. Guard against electric shock. - Avoid body contact with earthed or

grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

4. Keep children away. - Do not let visitors touch the tool or extension cable.

All visitors should be kept away from area.

5. Store idle tools. - When not in use, tools should be stored in a dry, high or

locked up place, out of reach of children.

6. Do not force the tool. -It will do the job better and safer at the rate for

which it was intended.

7. Use the right tool. - Do not force small tools or attachments to do the job of

a heavy duty tool. Do not use tools for purposes for which it was not

intended.

8. Dress properly. -Do not wear loose clothing or jewellery, they can be

caught in moving parts. Rubber gloves and non-skid footwear are

recommended when working outdoors. Wear protecting hair covering to

contain long hair.

9. Use safety glasses. - Always wear suitable eye protection, manufactured

to the latest European Safety Standards, when firing the stapler/nailer.

Eyeglasses are not safety glasses.

10. Do not abuse the cable. - Never carry the tool by the cable or yank it to

disconnect it from the socket. Keep the cable a way from heat, oil and

sharp edges.

11. Secure work. - Use clamps or a vice to hold the work. It is safer than using

your hand and it frees both hands to operate the tool.

12. Do not overreach. - Keep proper footing and balance at all times.

13. Maintain tool with care. - Inspect tool cable periodically and if damaged

have it repaired by an authorized service facility. Inspect extension cables

WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS,

INCLUDING THE FOLLOWING, SHOULD ALWAYS BE FOLLOWED TO REDUCE

THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY.

WARNING: READ ALL THESE INSTRUCTIONS BEFORE OPERATING THIS

PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

periodically and replace, if damaged. Keep handles dry, clean and free

from oil and grease.

14. Disconnect tools. - When not in use, before servicing and when changing

accessories such as blades, bits and cutters.

15. Avoid unintentional starting. - Do not carry a tool with a finger on the

switch.

16. Use outdoor extension leads. - When tool is used outdoors, use only

extension cables intended for outdoor use.

17. Stay alert. - Watch what you are doing. Use common sense. Do not

operate tool when you are tired.

18. Check damaged parts. - A guard or other part that is damaged should be

properly repaired or replaced by an authorized service centre unless

otherwise indicated in this instruction manual. Have defective switches

replaced by an authorised service facility. Do not use the tool if the switch

does not turn it on and off.

19. Warning. - The use of any accessory or attachment, other than those

recommended in this instruction manual, may present a risk of personal

injury.

20. Have your tool repaired by a qualified person. - This electric tool is complies

with the relevant safety requirements. Repairs should only be carried out by

qualified persons using original spare parts, otherwise this may result in

considerable danger to the user.

MACHINE SPECIFIC

1. Secure the workpiece. A workpiece held with clamping devices or in a

vice is held more securely than by hand.

2. Before any work on the machine itself (e.g. maintenance) as well as during

transport and storage, switch the machine off and remove the plug from

the power supply.

3. Keep your fingers away from the stapler/nailer head. There is danger of

injury when unintentionally actuating the On/ Off switch.

4. Never point the machine at persons or animals. Staples or nails shot from a

short distance can cause considerable injuries.

5. Do not use the machine to fasten electrical wiring. Contact with electric

wires can lead to fire and electric shock.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY SYMBOLS

SAFETY SYSTEM

FULL SEQUENTIAL ACTUATION

This stapler/nailer has an actuation system in which the trigger and safety yoke

are linked in such a way that it will only operate if the trigger is pulled after the

safety yoke (muzzle) has been applied to the work. Further driving operations

require the user to release the trigger and lift the safety yoke (muzzle) away from

the workpiece before the next use.

Read manual before use

Wear suitable eye protection

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply

through an approved BS1363/A plug fitted with a BS1362 fuse.

If the plug has to be changed because of damage, it must be removed and a

replacement fitted, following the wiring instructions shown below. The old plug

must be discarded safely, as insertion into a power socket could cause an

electrical hazard.

• The BLUE wire must be

connected to the

terminal which is

marked N or coloured

black.

• The BROWN wire must

be connected to the

terminal which is

marked L or coloured

red.

This symbol indicates that this is a Class II product, and does not

require an earth connection.

We strongly recommend that this machine is connected to the mains supply

through a Residual Current Device (RCD)

If you are not sure, consult a qualified electrician. DO NOT try to do any

repairs.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS

SUPPLY.

WARNING: WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE: BLUE = NEUTRAL,

BROWN = LIVE.

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral

(Blue)

Live

(Brown)

a 5 Amp

the cable is firmly held by the clamp

fuse.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREPARING THE STAPLER/NAILER FOR USE

FILLING THE MAGAZINE

1. Press and hold the magazine

catch then pull out the magazine.

2. Insert the staple strip or the nail

strip.

• Hold the stapler/nailer at a

slight angle while inserting the

nail strip so that nails rest

against the side wall.

• Only those fasteners stated in

the specification should be

used.

3. Close the magazine.

• Make sure it clicks shut.

WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG

FROM THE MAINS POWER SUPPLY BEFORE FILLING THE MAGAZINE.

CAUTION: KEEP YOUR FINGERS WELL AWAY FROM THE TRIGGER,

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING THE STAPLER/NAILER

1. Pay attention to all of the safety warnings in these operating instructions.

2. Set the ON/OFF switch to the ON

position.

3. Hold the tool with both hands and

press the nose against the work

• Always hold the stapler/nailer

square to the workpiece, never

at an angle.

• Make sure the safety is also

firmly against the workpiece.

4. Gently pull the trigger to fire the tool.

5. Check that at the fastener has

been driven into the workpiece.

• If it is protruding, increase the

impact force using the depth

control shown.

• If it has been driven in too far,

decrease the impact force

using the depth control shown.

• Check the result after each

adjustment.

• You should work at the lowest possible setting.

6. Release the trigger and lift the stapler/nailer away from the workpiece.

7. Repeat steps 3-6 as required.

8. In the event of long breaks in work or at the end of the working shift:-

• Switch off the stapler/nailer,

• Remove the mains plug from the power supply,

• Empty the magazine.

TIPS

• Do not intentionally activate the stapler/nailer if the magazine is

empty.

• Do not attempt to staple/nail at the edge of a workpiece, the edge

could fail, causing a nail or staple to shoot straight through.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TO CLEAR A JAM IN THE NAILER/STAPLER

Do not pull the trigger until the jam has been cleared, as this could cause

serious damage:

1. Release the magazine catch and

slide the magazine open.

2. Remove all staples/nails from the

chamber.

3. Lower the clip on the front of the

yoke.

4. Lift the front of the yoke upwards.

5. Remove the jammed fastner,

using pliers if required.

6. Lower the front of the yoke and

reengage the clip to lock in

place.

7. Once the jammed fastener is

removed, reload and continue.

MAINTENANCE

• The stapler/nailer does not require any maintenance other then

keeping it free from any dirt or debris. This can be done using a

clean dry cloth and/or brush. Do not use solvent or alcohol based

cleaner as it could damage the casing.

• There are no user serviceable parts on the stapler/nailer. If there is a

problem please contact your nearest CLARKE dealer.

• Do not open the casing, the guarantee will be void if the casing has

been opened or if the stapler/nailer has been tampered with.

• The use of parts other than CLARKE replacement parts may result in

safely hazards, decreased tool performance and will invalidate your

warranty.

WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG

FROM THE MAINS SUPPLY BEFORE CLEARING A JAM.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATION

Input Voltage 230V, 50Hz, 1Ph

Max Firing Speed 20 shots/min.

Maximum Magazine Capacity 100 Nails or 100 Staples

Nail Type F Type 18 Gauge -10 mm, 15 mm, 20

mm, 25 mm, 32 mm

Staple Type 18 Gauge (Type 90) - 16 mm, 19

mm, 22 mm, 25 mm

Dimensions 240 x 193 x 62 mm

Weight 1.75 kg

Activation Mode Full Sequential Actuation

Noise Characteristic Values In Accordance With EN12549.

Sound Pressure: 73.3 dB(A)

Sound Power Measured LwA 86.3dBLwA

Vibration Characteristic Values In

Accordance With ISO 8662-1 1: 1999 2.971 m/s2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Nagelpistole Handbücher

Clarke

Clarke Contractor CONSN18LIB Bedienungsanleitung

Clarke

Clarke CESNG1 Bedienungsanleitung

Clarke

Clarke Contractor CFN34 Bedienungsanleitung

Clarke

Clarke CONSN18LI Bedienungsanleitung

Clarke

Clarke Contractor CFN21 Handbuch

Clarke

Clarke CONTRACTOR GC0511 Installations- und Betriebshandbuch

Clarke

Clarke CSN1C Installations- und Betriebshandbuch

Clarke

Clarke CNG1C Installations- und Betriebshandbuch

Clarke

Clarke Air CNG1B Installations- und Betriebshandbuch

Clarke

Clarke Contractor CFN34 Installations- und Betriebshandbuch

Clarke

Clarke CSN-1D Bedienungsanleitung

Clarke

Clarke CONSN18LIC Bedienungsanleitung

Beliebte Nagelpistole Handbücher anderer Marken

Performance Tool

Performance Tool M643 Bedienungsanleitung

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco Fusion Technology F-35XP Bedienungsanleitung

Grizzly

Grizzly G1847 Bedienungsanleitung

Ryobi

Ryobi R18N18G Bedienungsanleitung

Black & Decker

Black & Decker 492848-00 Bedienungsanleitung

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Bedienungsanleitung

Metabo HPT

Metabo HPT NR 3690DC Bedienungsanleitung

Surtek

Surtek CN650 Abmessungen und Installationsanleitung

Makita

Makita GF600 Bedienungsanleitung

Parkside

Parkside PET 25 B1 Bedienungsanleitung

Senco

Senco AirFree 25 Bedienungsanleitung

Freeman

Freeman P50LSLW Bedienungsanleitung

Aicon PRO

Aicon PRO DAC4507 Bedienungsanleitung

Makita

Makita AN923 Bedienungsanleitung

Grizzly

Grizzly T20644 Bedienungsanleitung

Black & Decker

Black & Decker 90514937 Bedienungsanleitung