Clarke PG6500ADVES Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

LS1216

5.5KVA PETROL GENERATOR

MODEL NO: PG6500ADVES

PART NO: 8857856

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 5.5KVA Petrol Generator.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES

WORK AREA

•Always use in a well ventilated area.

• Always position the exhaust outlet away from people.

• Never use indoors or in a confined space.

• Read these safety instructions before using the equipment.

• Keep children away from the generator.

POSITIONING THE GENERATOR

1. Always leave a least a 1m gap between the generator and any

surrounding building or structures.

2. Always ensure the generator is on a solid, flat surface.

3. Always ensure the surrounding area is free from any material that could

burn or be damaged by heat.

4. Never move or tilt the generator whilst it is switched on.

FIRE PREVENTION

1. Always switch the engine OFF when refuelling.

2. Always refuel away from any source of heat.

3. Always refuel in a well ventilated area.

4. Only use standard unleaded petrol.

5. Never overfill the tank, fill to the level specified (See “Checking the fuel

level” on page 11.).

6. Never smoke whilst refuelling and avoid smoking or using a naked flame

near the generator.

7. Never start the engine if there is spilled fuel. Any spillage must be wiped

clean and the generator allowed to dry before attempting to start the

engine.

WARNING: EXHAUST FUMES CAN BE EXTREMELY DANGEROUS IF INHALED

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREVENTION OF ELECTRIC SHOCK

1. Never use the generator in wet conditions unless it is well protected/

covered. Under these conditions, adequate ventilation MUST be provided.

2. Never operate the generator with wet hands.

3. Never use water or any other liquids to clean the generator.

ADDITIONAL SAFETY RULES FOR GENERATORS

1. Always ensure the applied load does not exceed the generator rating.

Overloading the generator is dangerous and could cause serious

damage.

Always

disconnect the generator when carrying out any maintenance.

3. Always ensure the generator reaches operating speed before connecting

a load.

4. Never allow the generator to run out of fuel when a load is connected.

5. Never transport the generator with fuel in the tank.

6. Do Not connect to a commercial or residential power supply; e.g. ring

main.

7. Never allow the generator air vents to become blocked.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY SYMBOLS

Caution - The user

should be aware of a

general hazard

Hot Surface - Do not

touch

Dangerous voltage Poisonous fumes - Do

not use the generator

in an enclosed space.

Flammable Read Instruction

manual before use

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERATOR OVERVIEW

NO DESCRIPTION NO DESCRIPTION

1 Handles 8 Battery

2 Fuel Supply Valve 9 Wheel

3 Ignition Switch 10 Dipstick

4 Fuel Tank Cap 11 Starting Handle

5 Fuel Level Gauge 12 Air Filter

6Frame 13ChokeLever

7 Control Panel 14 Earth Point

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

UNPACKING AND ASSEMBLY

Unpack your generator and check to ensure the following items are present.

Should there be any deficiency or damage caused during transit contact

your CLARKE dealer immediately.

BEFORE USING THE GENERATOR

Attach a suitable earth lead to a good earthing point - water pipe, ground

spike etc., whenever you use this generator.

Before using your generator check that:

• The generator is in good condition and free from any damage.

• The generator is clean and free from fuel or oil spillage.

• The generator is correctly located for use (See page 3).

• The fuel system is intact and there is no leakage.

NOTE: Always use a funnel to fill the fuel tank to avoid accidental

spillage of fuel. If fuel is spilled it must be cleaned up before use.

1 x 5kW Petrol Generator 2 x Handle c/w fixings

1 x Axle c/w nuts & washers 1 x Spark Plug Box Spanner

2 x Wheel 1 x Tommy Bar

2 x Axle Brackets c/w fixings 1 x Pair of Ignition keys

2 x Foot Assembly c/w fixings 1 x Lead Acid Battery

WARNING: ENSURE THERE IS ADEQUATE FUEL IN THE TANK WHEN USING

THE GENERATOR. RUNNING OUT OF FUEL OR STOPPING THE ENGINE

SUDDENLY WITH A LOAD CONNECTED COULD CAUSE SERIOUS DAMAGE.

WARNING: ALWAYS CHECK THE OIL LEVEL BEFORE STARTING SEE

PAGE 10, FAILURE TO MAINTAIN THE CORRECT OIL LEVEL MAY SERIOUSLY

DAMAGE THE ENGINE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FITTING THE WHEELS/FEET

1. Lay the generator on its front and

attach the 2 feet to the frame

using 4 x short bolts, 4 x washers, 4

x spring washers and 4 x nuts.

2. Slide both wheels on to the axle.

3. Secure the wheel to the axle using

the nut provided.

4. Place the axle against the frame

on the generator as shown.

5. Fix the axle to the frame using

2 x long bolts, 2 x washers, 2 x

spring washers and 2 x nuts.

6. Carefully place the generator

onto its wheels/feet.

FITTING THE HANDLES

1. Place the handle into position as

shown.

NOTE: The generator has not been

shown in the image for clarity

2. Secure the handle using the

flanged nut and bolt supplied

• Making sure that the 2 plastic

washers are inserted between

the handle and frame as

shown.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CONNECTING THE BATTERY

• Connect the negative wire

to the negative terminal on

the battery as shown on

the right.

• Connect the positive wire

to the positive terminal on

the battery.

• Ensure both terminals are

covered by the plastic

covers as shown.

EARTH POINT

1. Ground the generator by

connecting a suitable grounding

wire to the earth point.

NOTE: Connect the other end of the

grounding wire to a copper or

brass grounding rod that is driven

into the earth.

WARNING: FAILURE TO PROPERLY GROUND THE GENERATOR CAN RESULT

IN ELECTROCUTION

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHECKING THE ENGINE OIL LEVEL

1. Turn the dipstick anti-clockwise

and remove from the oil fill tube.

2. Wipe the dipstick with a clean

cloth.

3. Insert the dipstick back into the oil

fill tube and then remove it again.

Do not screw in the oil filler cap/

dipstick when doing this.

4. If the oil level is at or below the ‘L’

mark on the dipstick, add oil to

the crankcase.

• Fill until the oil reaches the

threads in the oil fill tube.

• Oil capacity (See page 21).

• We recommend the use of

SAE15W40 oil in this generator.

available from your CLARKE

dealer.

5. Replace the oil filler cap.

WARNING: TO CARRY OUT THIS CHECK, PLACE THE GENERATOR ON LEVEL

GROUND WITH THE ENGINE SWITCHED OFF.

WARNING: TAKE CARE NOT TO TOUCH ANY HOT PARTS OF THE

GENERATOR WHEN CHECKING THE OIL LEVEL.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Tragbarer Generator Handbücher

Clarke

Clarke PG2500A Bedienungsanleitung

Clarke

Clarke G1200 Bedienungsanleitung

Clarke

Clarke CP range Bedienungsanleitung

Clarke

Clarke WH215 Bedienungsanleitung

Clarke

Clarke IG950 Bedienungsanleitung

Clarke

Clarke CGH3500 Installations- und Betriebshandbuch

Clarke

Clarke FG5100ES Bedienungsanleitung

Clarke

Clarke G900 Bedienungsanleitung

Clarke

Clarke IG2000 Bedienungsanleitung

Clarke

Clarke FG2000 Bedienungsanleitung

Clarke

Clarke IG2000D Bedienungsanleitung

Clarke

Clarke G700 Handbuch

Clarke

Clarke PG9500ADVES Bedienungsanleitung

Clarke

Clarke POWER CP2850K Handbuch

Clarke

Clarke IG3500AF Bedienungsanleitung

Clarke

Clarke WLD180 Bedienungsanleitung

Clarke

Clarke IG950B Bedienungsanleitung

Clarke

Clarke IG950D Bedienungsanleitung

Clarke

Clarke IG1200C Bedienungsanleitung

Clarke

Clarke IG2000C Bedienungsanleitung

Clarke

Clarke G950 Bedienungsanleitung

Clarke

Clarke IG2200A Bedienungsanleitung

Clarke

Clarke IG950C Bedienungsanleitung

Clarke

Clarke CP Range Installations- und Betriebshandbuch

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung