Clarke PG9500ADVES Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

DL0623

8.5KVA PETROL GENERATOR

MODEL NO: PG9500ADVES

PART NO: 8857860

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

IINTRODUCTION

Thank you for purchasing this CLARKE Generator.

Before attempting to operate the machine, it is essential that you read this

manual thoroughly and carefully follow all instructions given. In doing so you

will ensure the safety of yourself and that of others around you, and you can

also look forward to the product giving you long and satisfactory service.

Ensure the generator and its components suffered no damage during transit

and that all components are present. Should any loss or damage be

apparent, please contact your CLARKE dealer immediately.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

If disposing of this product or any damaged components, do not dispose of

with general waste. This product contains valuable raw materials. Metal

products should be taken to your local civic amenity site for recycling of metal

products.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATIONS

CLARKE part no 8857860 PG9500ADVES

Engine Engine Model SC460

Engine Power 16HP - 10.5kW

Fuel Type E10 Unleaded Petrol

(87 Octane Rate)

Displacement (cc) 459

Starting system Electric & Hand Recoil

Fuel tank capacity (Litre) 20 L (Safe Capacity)

Fuel consumption 3.3 L/Hr

Maximum run time @75% Load 6 hours 30 mins

Engine oil type SAE30-10W30 or 5W30

Engine oil capacity (L) 1.1L

Battery Type 12V,18Ah, SLA

Generator Rated Frequency (Hz) 50

AC Output Voltage (V) 230 & 110

Rated Power (W) 8000

Max. Rated Power (W) 8500

Dimensions L x W x H (mm) 730 x 660 x 630

Unpacked Weight (kg) 100

Environmental IP Rating (Generator/Sockets) IP23M/IP44

Sound pressure level 74 dB

Sound power level 94 dB

Guaranteed sound power level 97 dB

Uncertainty factor 2.8 dB

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL SAFETY RULES & SYMBOLS

SAFETY SYMBOLS

Read Instruction manual

before use

DANGER - highly

flammable liquid.

Caution - The user should

be aware of a general

hazard

Engine and exhaust

become hot during use

- DO NOT touch

Dangerous voltage. Risk

of electric shock

Poisonous fumes - DO

NOT use in an enclosed

space.

Wear ear defenders For outdoor use only. DO

NOT expose to rain.

DO NOT use in the wet. These symbols are to be found on

the product.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

WORK AREA

1. ALWAYS use in a well ventilated area.

2. ALWAYS position the exhaust outlet away from people.

3. NEVER use indoors or in a confined space.

4. ALWAYS keep children away from the generator.

POSITIONING THE GENERATOR

1. ONLY use the folding handles to wheel the generator into position. NEVER

use them to lift the generator off the ground.

2. ALWAYS leave a least a 1m gap between the generator and any

surrounding building or structure.

3. ALWAYS ensure the generator is on a dry, solid, flat surface.

4. ALWAYS ensure the surrounding area is free from any material that could

burn or be damaged by heat.

5. NEVER move or tilt the generator whilst it is switched on.

FIRE PREVENTION

1. ALWAYS switch the engine OFF when refuelling. Allow generator to cool for

at least 2 minutes before removing the fuel cap. Loosen cap slowly to

relieve pressure in the tank.

2. ALWAYS refuel away from any source of heat.

3. ALWAYS refuel in a well ventilated area.

4. ONLY use standard unleaded petrol.

5. DO NOT overfill the fuel tank. DO NOT fill to the very top of the tank and

leave room for petrol expansion.

6. NEVER smoke whilst refuelling and avoid smoking or using a naked flame

near the generator.

7. DO NOT operate near an open flame, heat or flammable materials. This

generator may emit highly flammable and explosive petrol vapours.

8. NEVER start the engine if there is spilled fuel. Any spillage must be wiped

clean and the generator allowed to dry before attempting to start the

engine.

PREVENTION OF ELECTRIC SHOCK

1. NEVER use the generator in wet conditions unless it is well protected/

covered. Under these conditions, adequate ventilation MUST be provided.

2. NEVER operate the generator with wet hands.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

3. NEVER use water or any other liquid to clean the generator.

4. ALWAYS ground the generator before using it to maximise safety, see

‘Ground The Generator’ section on page 14.

5. ALWAYS use a ground fault circuit interrupter (GFCI) (not included) in highly

conductive areas such as metal decking or steel work. Extension cords with

an in-line GFCI are recommended for these operations.

GENERAL SAFETY RULES FOR GENERATORS

1. ALWAYS ensure the applied load does not exceed the generator rating.

Overloading the generator is dangerous and could cause damage.

ALWAYS

disconnect the generator when carrying out any maintenance.

3. ALWAYS ensure the generator reaches operating speed before connecting

a load.

4. NEVER allow the generator to run out of fuel when a load is connected.

5. NEVER transport the generator with fuel in the tank.

6. DO NOT connect to a commercial or residential power supply; e.g. ring

main.

7. DO NOT touch hot parts. This generator produces heat when running.

Temperatures near the exhaust can exceed 150°F/65°C. Allow the

generator to cool down after use before touching the engine or areas of

the generator that become hot during use.

8. If any part of the generator, electrical device or power cable is broken,

damaged or defective, make sure it is repaired or replaced before using.

Service or repair of the generator should only be performed by a qualified

technician.

9. NEVER modify the generator in any way. Modifying or using the generator

for any other purpose for which it is not designed may result in serious injury,

machine damage and voiding of the warranty.

10. ALWAYS turn off all connected electrical devices before stopping the

generator.

11. ALWAYS turn the engine switch to the ‘OFF’ position when the engine is not

running.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERATOR OVERVIEW

NO DESCRIPTION NO DESCRIPTION

1 Control Panel 7 Folding Handles

2 Battery 8 Fuel Cap

3 Oil Fill Cap/Dipstick 9 Fuel Gauge

4 Oil Drain Plug 10 Choke

5 Recoil Starter 11 Spark Plug

6 Air Filter 12 Muffler/Exhaust

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CONTROL PANEL OVERVIEW

NO DESCRIPTION NO DESCRIPTION

1 Electric Start Ignition 8 32A, 240V Plug Socket

2 Oil Level Alert Lamp 9 16A Breaker Switch

3 Data Centre (Volts & Hertz per

hour)

10 16A, 110V Plug Socket

4 Main Breaker Switch 11 Earth Grounding Terminal

5 13A Breaker Switch 12 32A Breaker Switch

6 AC 230V Plug Socket 13 32A, 110V Plug Socket

7 32A Breaker Switch

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

UNPACKING

Unpack your generator and check to ensure the following items are present.

Should there be any deficiency or damage caused during transit contact

your CLARKE dealer immediately.

BEFORE USING THE GENERATOR

Attach a suitable earth lead to a good earthing point (see page 14) - e.g.

water pipe, ground spike etc., whenever you use this generator.

Before using your generator check that the generator is:

• In good condition and free from any damage.

• Clean and free from fuel or oil spillage and the fuel system is intact.

• Correctly located for use (see page 5).

NOTE: ALWAYS use a funnel to fill the fuel tank to avoid accidental

spillage of fuel. If fuel is spilled it must be cleaned up before use.

1 x 8.5kW Petrol Generator 2 x Folding Handle c/w fixings

2 x Axle, Washer & R Clip 1 x Spark Plug Box Spanner & Pouch

2 x Wheel & Axle Cover 1 x Tommy Bar

2 x Foot Assembly c/w fixings 1 x Pair of Ignition keys

1 x Lead Acid Battery

(Not Connected, see page 11)

WARNING: ENSURE THERE IS ADEQUATE FUEL IN THE TANK WHEN USING

THE GENERATOR. RUNNING OUT OF FUEL OR STOPPING THE ENGINE

SUDDENLY WITH A LOAD CONNECTED COULD CAUSE SERIOUS DAMAGE.

WARNING: ALWAYS CHECK THE OIL LEVEL BEFORE STARTING SEE PAGE

12, FAILURE TO MAINTAIN THE CORRECT OIL LEVEL MAY SERIOUSLY

DAMAGE THE ENGINE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

CAUTION: DUE TO THE WEIGHT OF THE GENERATOR, IT IS RECOMMENDED THAT THE

ASSEMBLY IS UNDERTAKEN BY 2 PERSONS.

FITTING THE WHEELS

1. Slide the axle through the

wheel and place the washer

on the axle on the frame side

of the wheel.

2. Slide the axle assembly

through the frame bracket

and insert the R clip through

the axle hole to secure in

place.

3. Attach the wheel centre cap

to the outside of the wheel.

FITTING THE FEET

1. Insert an M6 bolt through the

rubber pad and secure to the

bottom of the foot support

bracket with M6 nut.

2. Place the foot support

bracket to the underside of

the frame and insert two

flange nuts and bolts and

tighten.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Tragbarer Generator Handbücher

Clarke

Clarke IG950C Bedienungsanleitung

Clarke

Clarke G1200 Bedienungsanleitung

Clarke

Clarke IG2000D Bedienungsanleitung

Clarke

Clarke IG2000 Bedienungsanleitung

Clarke

Clarke FG3050 Bedienungsanleitung

Clarke

Clarke FG4050ES Bedienungsanleitung

Clarke

Clarke IG950B Bedienungsanleitung

Clarke

Clarke PG3800ADV Bedienungsanleitung

Clarke

Clarke FG2500 Bedienungsanleitung

Clarke

Clarke IG2200A Bedienungsanleitung

Clarke

Clarke IG1200C Bedienungsanleitung

Clarke

Clarke CP range Bedienungsanleitung

Clarke

Clarke CGH3500 Installations- und Betriebshandbuch

Clarke

Clarke IG1200D Bedienungsanleitung

Clarke

Clarke G700 Handbuch

Clarke

Clarke FG5100ES Bedienungsanleitung

Clarke

Clarke IG950 Bedienungsanleitung

Clarke

Clarke IG950D Bedienungsanleitung

Clarke

Clarke PG3800A Bedienungsanleitung

Clarke

Clarke POWER LS0510 Bedienungsanleitung

Clarke

Clarke IG1700F Bedienungsanleitung

Clarke

Clarke G950 Bedienungsanleitung

Clarke

Clarke WLD180 Bedienungsanleitung

Clarke

Clarke PG2500A Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung