Clarke COB10C Betriebsanleitung

ASSEMBLY & USER

INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC1119 - ISS2

10W LED WORKLIGHT(230V)

MODEL NO: COB10C

PART NO: 4003605

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE portable worklight with carry handle and

floor stand, suitable for indoor or outdoor use.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. This worklight must not be immersed in water.

2. Do not look directly into the lamp when switched on as this can damage

the eyes.

3. If used with an extension cable always ensure that the extension cable is

fully unwound.

4. Do not use this worklight if it has a broken lens, casing or damaged supply

cable.

5. Always unplug the worklight before moving it or performing maintenance.

Do not touch the lamp when your hands are wet.

6. Do not attempt to disassemble or repair the worklight.

7. Do not leave the worklight unattended when switched on. Always unplug

the worklight when it is not in use.

8. Never unplug the worklight by holding the cable. Unplug by holding the

plug.

9. Never use the worklight if the cable or plug are damaged.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTION

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply

through an approved BS 1363 plug, or a suitably fused isolator switch.

If the plug has to be changed because it is not suitable for your socket, or

because of damage, it must be removed and a replacement fitted, following

the wiring instructions shown below. The old plug must be discarded safely, as

insertion into a power socket could cause an electrical hazard.

If the colours of the wires in the power cable do not agree with the markings

on the plug.

• The BLUE wire must be

connected to the

terminal which is

marked N or coloured

black.

• The BROWN wire must

be connected to the

terminal which is

marked L or coloured

red.

• The YELLOW AND

GREEN wire must be

connected to the terminal which is marked E or or coloured green.

We strongly recommend that this product is connected to the mains supply

through a Residual Current Device (RCD)

If you are not sure, consult a qualified electrician.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS

SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE

COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral

(Blue)

Live

(Brown)

Earth

(Green and

a 3 Amp

the cable is firmly held by the clamp

fuse.

Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

The lamp is mounted on a carry

frame which is assembled as follows:

1. Remove the locking knob from

the base of the carry frame, then

insert the tubular base into the

frame attachment, as shown.

2. Line up the holes in the two

sections of the frame then

replace and tighten the locking

knob.

CARE & STORAGE

1. When not in use, switch off & unplug from the power supply.

2. Store this product in a secure, dry place, out of the reach of children. DO

NOT leave it exposed to the elements and avoid direct sunlight, direct

heat, rain/moisture etc.

3. Keep the external surfaces clean. Avoid impact damage & do not allow

this worklight to come into contact with abrasive or corrosive materials.

4. Do not use solvents, thinners or alcohol for cleaning, as these chemicals will

damage the finish. With the worklight unplugged from the power supply,

use a dry cloth to wipe over the components.

5. Only use extension leads that are of an appropriate power rating and

suitable for the work environment. Inspect the extension lead regularly and

replace if damaged.

6. The LED light source cannot be replaced but has a life expectancy of

approximately 20000 hours.

7. Never use unauthorized accessories or attachments which can cause

personal injury or damage to the worklight.

8. Do not attempt to repair or modify this product or attempt any electrical

repair yourself. Consult the Clarke Service Department on 020 8988 7400.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ERP TECHNICAL INFORMATION

Model COB10C

Part No 4003605

Model type L9601P

Dimensions (L x W x H) 180 x 156 x 250 mm

Weight 1.1 kg

Operating Temperature -20oC to + 50oC

Light Source COB LED

Input power (LED Wattage consumption) 10W

Light Output (Luminous flux) 800 lumen @ 1m

Fuse Rating 3A

Power Supply 230V @50Hz

Insulation Class I

IP Rating IP65

Energy Efficiency Class A+

Colour Temperature 6500 K

Weighted Energy Consumption 10kWh /1000hr

Efficiency 80 Lm/W

Life expectancy of LED 20,000 hours

LED type Epistar LED chip

Tilt adjustment -90oto +90o

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY

Inhaltsverzeichnis

Andere Clarke Arbeitsleuchte Handbücher

Clarke

Clarke COB10C/110 Betriebsanleitung

Clarke

Clarke SMD84T/110 Betriebsanleitung

Clarke

Clarke UBL1600R Bedienungsanleitung

Clarke

Clarke SMD42T Betriebsanleitung

Clarke

Clarke PL5R Bedienungsanleitung

Clarke

Clarke COB10T Betriebsanleitung

Clarke

Clarke LED1000R Bedienungsanleitung

Clarke

Clarke HLC400T Betriebsanleitung

Clarke

Clarke CL6FS Bedienungsanleitung

Clarke

Clarke SMD4500 Bedienungsanleitung

Clarke

Clarke LED700SR Bedienungsanleitung

Clarke

Clarke MFL800R Bedienungsanleitung

Clarke

Clarke SMD42T/110 Betriebsanleitung

Clarke

Clarke HLC400T/110 Betriebsanleitung

Clarke

Clarke SMD84T Betriebsanleitung

Clarke

Clarke RWL30 Bedienungsanleitung

Clarke

Clarke HLC400 Betriebsanleitung

Clarke

Clarke COB10CR Bedienungsanleitung

Clarke

Clarke SMD42C Betriebsanleitung

Clarke

Clarke CTL24/3 Bedienungsanleitung

Clarke

Clarke CFL20Li Bedienungsanleitung

Clarke

Clarke GWL700R Bedienungsanleitung

Clarke

Clarke RWL36LI Bedienungsanleitung

Clarke

Clarke SMD2700L Bedienungsanleitung

Beliebte Arbeitsleuchte Handbücher anderer Marken

ANSMANN

ANSMANN POWERLIGHT 5.1 Bedienungsanleitung

RTRMAX

RTRMAX RTX1868 Bedienungsanleitung

FeinTech

FeinTech LAL00220 Bedienungsanleitung

Bunker Hill Security

Bunker Hill Security 64735 Bedienungsanleitung

Goobay

Goobay 30450 Bedienungsanleitung

REV Ritter

REV Ritter SPOT Bedienungsanleitung

Ignition

Ignition Stagepix Line 100 IP Bedienungsanleitung

SCANGRIP

SCANGRIP DUO CONNECT Bedienungsanleitung

Bosch

Bosch GLI 18 V Bedienungsanleitung

Bayco

Bayco SL-1514 Bedienungsanleitung

EUFAB

EUFAB SMD LED 8+1 Bedienungsanleitung

DeWalt

DeWalt DCL510 Bedienungsanleitung

MaxLite

MaxLite 73683 Bedienungsanleitung

Heitronic

Heitronic Trend 27867 Bedienungsanleitung

EINHELL

EINHELL TE-CL 18/2000 LiAC Bedienungsanleitung

IKEA

IKEA STRÖMLINJE Bedienungsanleitung

Regent

Regent CHSL300 Bedienungsanleitung

Monzana

Monzana Spodaj MZUL277 Bedienungsanleitung