EZ Skirting Board Cleaner
H038 v01: 04/09/20
Please read and retain these instructions for future reference
1. Start by connecting the lower handle to one of the middle handles. Make sure that the holes of the
lower handle are aligned with the buttons on the middle handle.
2. Connect the second middle handle to the end of the assembly. Make sure that the holes of the first
middle handle are aligned with the buttons of the second middle handle.
3. Next, connect the top handle to the end of the middle handle. Make sure that the holes of the middle
handle are aligned with the buttons of the top handle.
4. Attach the head of the cleaner by screwing it onto the lower handle.
5. If you need to clean the cleaning pad, simply peel it from the head unit. Replace the cleaning pad by
attaching the back of it to the head.
Dimensions
10 x8 x106cm extending up to 170cm
•HAVE YOUR SKIRTING BOARDS LOOKING LIKE NEW AGAIN!
•CLEANING SKIRTING BOARDS CAN BE A REAL PAIN FROM HAVING TO BEND DOWN TO
CLEAN OR CRAWLING ALONG ON YOUR KNEES
•BUT WITH OUR EZ SKIRTING BOARD CLEANER YOU NO LONGER HAVE TO BREAK YOUR
BACK! SIMPLY WALK ALONG AND GLIDE THE PAD ALONG THE SKIRTING BOARDS
•YOU CAN USE DRY FOR A QUICK DUST OR WET TO REALLY GET THEM GLEAMING
•THE HANDLE EXTENDS UP TO 170CM SO YOU CAN REACH HIGH AS WELL AS LOW
•THE CLEVERLY DESIGNED MICROFIBRE HEAD IS SHAPED PERFECTLY TO GET INTO EVERY
GROOVE OF YOUR SKIRTING BOARD
•SWIVELLING HEAD FOR CLEANING AT ANY ANGLE
•COMES WITH 3 REPLACEABLE MICROFIBRE HEADS
