English
GREAT BRITAIN •
for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Ver. 201010
Laser level
Art.no 40-7709 Model LD-LS 10
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Safety
• Keep the product’s warning labels in readable condition.
• Never point the laser towards people or animals and never
look into the laser yourself. Even low intensity lasers can
cause permanent eye damage.
• This product contains no parts that you can repair yourself.
This product must not be dismantled, opened or modified
in any way.
• The laser may not be used for purposes other than
to project laser lines for the purposes of measuring.
• This measuring instrument emits a Class II laser beam
according to the IEC 60825-1 standard. There is a possible
risk that this laser if used improperly could cause blindness
in humans and animals.
• Only let qualified tradesmen repair this instrument
and only using original parts.
• Never point the laser onto reflective material.
• This product is not a toy! Never let children use the laser
level without supervision. There is a possible risk of
inadvertently blinding someone.
• Never position the laser level in such a way that the beam
projects at eye level and could shine into someone’s eyes.
• Never leave the laser on unattended. Always turn it off after
completing a measurement. There is a possible risk that
someone could be blinded by the laser beam.
Extra safety regulations specifically for lasers
Warning! Laser emissions.
Laser class II, 650 nm.
Never look directly into the laser
beam. Never look into the laser
beam using optical instruments.
Product description
Self-levelling laser level with horizontal and vertical line
projection. Wall mounting pins.
Buttons and functions
Projecting lines onto walls
1. Set up the level against the wall and turn on the laser
using the ON/OFF button (3).
2. Open, or if it is more suitable, lock the self-levelling
using the lock button (2).
3. Extend the wall pins and attach the laser level to
the wall if the material permits this.
Projecting lines onto floors or horizontal surfaces
1. Place the laser level in a stable position and lock
the self-levelling.
2. Turn the laser on using the ON/OFF button (3).
Care and maintenance
• Treat the laser level as an optical instrument.
Keep it clean and dry.
• Do not subject the instrument to impacts,
high temperatures or moisture.
• Use a damp cloth to clean the outer casing.
Never use solvents or corrosive cleaning products.
• If the instrument is not to be used for a long time, remove
the batteries and store the instrument in a safe place.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product,
please contact your local authority.
Specifications
Range 10 m (33 ft)
Wavelength 650 nm
Laser power 1 mW
Voltage 3 V
Operating temp. 0 ºC – 40 ºC
Accuracy 1 mm/m
1. Laser beam window
2. Open/lock self-levelling
3. ON/OFF
4. Housing
5. Wall pin button
6. Battery cover
7. Anti-slip surface
Getting started
1. Open the battery compartment and insert 2 x AA/LR6
batteries. Make sure that the negative terminals of the
batteries are against the springs in the compartment.
2. Replace the battery cover.
Operation
The laser level can be used to project horizontal and vertical
lines or 90º angles.
123
4 5 6 7
