Clas Ohlson GN-WB31N-RH Bedienungsanleitung

EnglishSvenskaNorskSuomi

Wireless Network Card

Trådlöst nätverkskort

Trådløst nettverkskort

Langaton verkkokortti

Art.no. Model

38-3168 GN-WB31N-RH Ver. 201101

English

Wireless Network Card

Art.no 38-3168 Model GN-WB31N-RH

Please read theentire instruction manual before use and save it for future reference.

We reserve theright for any errors in text or images and for making any necessary

technical changes to this document. If you should have any questions concerning

technical problems please contact our Customer Services.

Installation

This is only aquick guide so that you can quickly get started with theproduct.

A complete operator’s manual in English is found on thesupplied CD.

Installation of drivers

The following installation instructions apply for Windows XP with

Service pack 2 installed.

1. Start thecomputer and connect thenetwork card to afree USB port.

2. The computer will

recognise thenetwork

card and the“New

Hardware Found”

message appears

automatically. Insert

theincluded CD in

theCD ROM reader

and mark No, not this

time on thequestion if

thecomputer request to

search for drivers online.

Click Next.

English

3. Select Install

thesoftware program

automatically and

click on Next.

4. The installation starts and stops

automatically. Press Finish to

complete theinstallation.

English

Installation of software

To access all thenetwork card’s functions theinstallation of software from

theincluded CD is required.

The network card can also be used with some operating system’s software

(e.g. Windows 2000 SP4, Windows XP SP2 and Windows Vista). To take full

use of thenetwork card thefollowing software should be installed.

1. Insert thesupplied CD into thecomputer’s CD-ROM drive. The installation

guide automatically starts and thestart image is displayed.

If theinstallation

does not start

automatically, run

theﬁle LAUNCH.

EXE on theCD.

2. Click on Install Driver & Utlility and then thebutton N300 series to install

theconﬁguration program.

English

3. Click Next

to continue.

4. Click Next

to continue.

5. Click on Finish to ﬁnish

theguide.

6. When theinstallation

is completed

theconnection

guide starts. Follow

theinstruction

“Connect to

awireless network”.

English

Use

Connect to awireless network/use SmartSetup 3

1. When theinstallation is ﬁnished thedialogue box over accessible networks

is displayed.

2. Click thebutton

SmartSetup 3 to start

theconnection guide.

3. Highlight thedesired

network and

choose OK to add

thenetwork to thelist

of desired networks.

English

4. Enter your wireless network’s key and thetype of security that is being

used, then click OK. Contact thenetwork administrator if you are unsure of

which information is needed.

5. The network is now

added to thelist of

networks. Choose

thetab Proﬁle to see

thelist of available

networks. The following

menu is displayed.

6. Highlight thenetwork

you just added and

then click on Activate.

The computer now

automatically connects

thewireless network

when thecomputer is

started. Press OK to

conﬁrm.

English

Troubleshooting

Check theTCP/IP features

1. Go to Control panel and choose Network connections.

Right-click on theconnection to thenetwork card you wish

to conﬁgure and select Properties.

2. Mark theTCP/IP protocol that is connected to thenetwork card and

choose Properties.

3. Check that Obtain an IP address automatically and Obtain address to

theDNS server automatically are marked.

4. Click OK.

Check configuration

You can check that thecomputer has thecorrect IP address by:

1. Open Program/Accessories/Command prompt. Write ipconﬁg and

press [ENTER] to show IP-address, net mask and Gateway.

2. If thecomputer has received thecorrect IP address you don’t have to enter

any more settings. Write exit and press [ENTER] to return to Windows.

Update configuration

If thecomputer still has an old or incorrect IP address it can be renewed to

receive acorrect IP address. Do thefollowing:

1. Open Program/Accessories/Command prompt.

Write ipconﬁg/release and press [ENTER].

English

2. Write ipconﬁg/renew and press [ENTER].

Your IP address is displayed, e.g. 192.168.1.34,

Standard-gateway: 192.168.1.1 and Net mask: 255.255.255.0.

3. Write exit and press [ENTER] to return to Windows.

Inhaltsverzeichnis

Sprachen:

Andere Clas Ohlson Netzwerkkarte Handbücher

Clas Ohlson

Clas Ohlson BL-8169 Bedienungsanleitung

Clas Ohlson

Clas Ohlson ae2220 Bedienungsanleitung

Clas Ohlson

Clas Ohlson 38-2497 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GN-WP30N-RH Bedienungsanleitung

Clas Ohlson

Clas Ohlson AE222X1 Bedienungsanleitung

Clas Ohlson

Clas Ohlson HE132R Bedienungsanleitung

Clas Ohlson

Clas Ohlson BL-8139D Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung

Gigafast

Gigafast EE101-AEX Bedienungsanleitung