Clauss Rodeon Bedienungsanleitung

First Steps 12/01/13

List of Contents

1 Introduction and intended purpose ..........................................................3

1.1 Notes on safety ...................................................................................3

2 Device definition ......................................................................................4

3 Getting started .........................................................................................4

3.1 Hand ing the RODEON Turntab e ....................................................4

3.2 Contro e ements at the transceiver ....................................................5

4 Insta ation of the contro ing software .....................................................6

4.1 Insta ation of the contro ing software on a PDA .............................6

4.2 Insta ation of the contro ing software on a Windows-PC.................8

5 Technica data ..........................................................................................9

6 Guarantee ................................................................................................10

7 Manufactured by......................................................................................13

8 Copyright.................................................................................................13

9 Questions about RODEON Turntab e ? .................................................14

First Steps RODEON TurnTab e

1 Introduction and intended purpose

Many thanks, that you have decided for the RODEON modu ar manufactured by our

company. We are sure that you wi have ong joy with this purchase, if you read

through and fo ow these instructions first.

The RODEON Turntab e is an automatic object-positioning tab e for segmented ob-

ject photography of items with a permissib e maximum mass unti 20 kg, especia y

for recording scans, object movies and mu ti-angu ar perspectives.

The specified working orientation is in princip e standing on a horizonta , stab e base.

The Turntab e is on y designed for working under norma studio conditions and is not

permitted to use under the inf uence of rain, high humidity, dusty or other aggressive

environmenta inf uences.

1.1 Notes on safety:

During the operation there are mass-shiftings and acceleration-strengths neces-

sitated by the function. It is to be guaranteed therefore, that the installation on a

sufficiently stable base is always steady and non-s id and without possible colli-

sion of the rotating objects with the device itself or in interaction with other ob-

jects , e.g. camera, cables or lamps.

If cables are part of the scope of delivery, only these cables have to be used. Us-

ing different cables may be followed by immense damages.

For damages, also secondary damages, which are caused by non-observance of

these tips at the Turntable, other objects or persons, the manufacturer does not

ta e over any liability.

First Steps RODEON TurnTab e

2 Device definition

The components

➢Turntab e with horizonta drive, transceiver modu e and turntab e mounted com-

p ete y as a unit. (In case of RS-232/USB version: additiona data cab e and USB

adapter)

➢P ug-in power supp y unit

➢Camera-extension cab e

➢User-software and operation manua on CD

➢PDA or Netbook inc . origina accessories (optiona )

3 Getting started

3.1 Handling the RODEON Turntable

•Put the Turntab e on a horizonta stab e base.

•Insta the remote-contro -connection between your camera and the RODEON

Turntab e. For doing so, connect the remote-contro -cab e that is suitab e for your

camera by using the supp ied camera extension cab e at the sidewise mini-DIN-

connector of the transceiver and to the remote-contro -connector of your camera.

By aying the cab e, p ease ensure that the turntab e is ab e to move with the ob-

jects p aced on it.

Please note: For some cameras, the remote-contro -connector must be activated

by the camera-menu.

•For using the device with a wired data interface (RS-232, USB), p ease connect

your Turntab e and PC with the data cab e. Power supp y is rea ised with this

cab e by connecting the p ug-in power supp y unit PC-sided with the data cab e.

First Steps RODEON TurnTab e

•For using the Turntab e via B uetooth, p ease connect the p ug-in power supp y

unit direct y at the transceiver.

•Switch on your turntab e by moving the s ide switch at the transceiver to 'SUP'.

Afterwards, p ease start the contro ing software on the PDA or Windows

PC/Laptop.

•After setting up the data connection (p ease see the manua ), the Turntab e is now

ready for work.

3.2 Control elements at the transceiver

BAT/SUP: For switching the device between Battery and externa

power supp y. As the Turntab e does not have a battery

mounting p ate, the device is off in the switch position

'BAT'. P ease quit the user-software (PDA, PC, Laptop)

before switching off the device. In case of onger breaks,

the device shou d be switched off.

BUS: Contro indicator data bus

B ue LED: Status B uetooth

Ye ow LED: Status RS232 via Mini-DIN-connector

Green LED: Status externa data bus (e.g. USB-Hub

modu e)

f ashing ight.....................ready indication/ waiting for

data connection

constant f ashing ight .......data connection successfu

Mini-DIN 4-pin: - RS232-Data bus

- Power Supp y (9V..15V DC)

Mini-DIN 6-pin: - 2 potentia -free re ay contacts (NO)

- Exit 5V DC

First Steps RODEON TurnTab e

4 Installation of the controlling software

4.1. Installation of the controlling software on a PDA (Handheld)

Requirements:

• Hardware: We recommend types of PDA that we tested ourse ves. You can

purchase them from us with a ready insta ed software.

- B uetooth C ass 1 or 2

- Aspect ratio 4:3 (Touchscreen)

- Type of processor: ARM V.4 or ARM V.5

- 2MByte free F ash storage

• Software: Windows Mobi e 2003 / 5 / 6.x

With the contro ing software „RODEONmodu ar“ contained in the

scope of de ivery you can contro the Turntab e just ike using a re-

mote contro or by programming comp ete motions with camera

shutter re eases. Free updates are avai ab e at our down oad center

at http://www.dr-c auss.de .

Caution: The functiona ity can not be guaranteed for a PDA systems.

You can get more information about using the PDA in the corresponding opera-

tion manual that is included in the provided product-CD. It is pointed out in-

sistently, that using the PDA is much different to using a PC with MS-Windows.

The current y offered Pocket-PC's/ PDA's are partia y very much different in their

storage management. Often, a hardware reset or remova of the accumu ator is caus-

ing the ost of a data that was not exp icit y copied into the ROM of the device. The

ROM (read on y memory) is understood as the storage that keeps it's data even

without power supp y. In this case we recommend to copy the insta ation fi es into

the ROM in order to be ab e to have access to them in every situation.

First Steps RODEON TurnTab e

P ease fo ow the further instructions to insta the contro ing software „RODEON-

modu ar“:

1. Switch on the PDA and, if necessary, proceed the usua procedure (e.g. adjust

ing the touchscreen etc.).

2. Start the fi e exp orer and change into the directory with the insta ation fi es

(if needed, change to „My Device“ and „ROM Storage“ or „Recovery“).

3. Open insta ation fi es in this order:

„CLAUSS_RootCA.cab“ (not avai ab e in Windows Mobi e 2003)

„RodeonAPI.cab“

„RODEONmodu ar_GUI.cab“

and fo ow the instructions

The contro ing software is now insta ed and ready to use.

Please note: Some types of PDA a ow inking the programs by quick buttons.

If this function is not supported, such a inking can be p aced on the desktop

for achieving a faster operating princip e.

4. Activate the B uetooth interface of the PDA (often by c icking on the b ue

B uetooth symbo in the ower right corner of the screen).

5. By using the B uetooth manager, search for new devices in the surrounding

(often by using the menu item „New“ and „search for B uetooth device“). The

RODEON modu ar must be switched on with the insta ed antenna in order to

find it as B uetooth device.

6. After the device was found, a symbo with the designation „RODEONmodu-

ar“ appears. P ease choose this symbo by c icking on it and type in the pass

word CLAUSS (in capita s!) and confirm with Enter/Return.

7. P ease activate „Generic Seria “ and, if necessary, assign port (e.g. COM 9).

8. Confirm with „ready“ and c ose the B uetooth manager. The insta ation is

now comp eted.

First Steps RODEON TurnTab e

After the start of the contro ing software the PA automatica y connects with

the RODEON Turntab e and work can be started.

4. 2. Installation of the controlling software on a Windows-PC

System requirements: - Windows 2000/XP/Vista

- Desktop-PC/Laptop

- B uetooth C ass 1 or 2 (wire ess connection)

- RS232-/USB-interface (wired connection)

- CD-ROM drive

You can find the program „RODEONmodu ar“ on the supp ied CD in the directory

„Software“. This program is used for remote-contro ing the TurnTab e and for auto-

mation of comp ete object motions.

For creating object movies, a demo version of the software Object2VR can be found

on the product-CD in the subfo der „Uti ities“.

Please note our hints for:

•insta ation of the contro ing software on a PC

•insta ation of an optiona B uetooth modu e on a PC (examp e)

•maintenance and care of the Turntab e and the accumu ator

•optiona accessories

•fau t tracing

in the operation manua on CD.

First Steps RODEON TurnTab e

5 Technical Data

Dimensions (without objects) 300 x 305 x 95

Weight approx. 2 kg

Range of motion 0°...360°

Addressed angular steps 0,015° (24000 steps/360°)

Max. Drive torque > 4000 mNm

Payload < 20 kg

Power Supply - P ug-in power supp y unit 100..240 V

- Low vo tage 12 V (2 A)

Camera-triggering - Pre-trigger (pressure point)/ Trigger

- 2 independent ga vanica y uncoup ed switching

outputs (norma y open contact)

- Cab e-connection to specia camera-p ug, e.g.

Nikon, Canon, Hasse b ad, Panasonic, Leica,

Sony, O ympus... (Cab e is not part of the

standard scope of de ivery)

First Steps RODEON TurnTab e

6 Guarantee

Guarantee terms, scope and conditions

If a product manufactured by Dr. C auss Bi d- und Datentechnik GmbH (CLAUSS)

turns out to be defective within 24 months after the purchase date at the trader or dir-

ect y at the manufacturer (p ease present the origina invoice or sa es receipt),

CLAUSS provides and honors this guarantee against the first fina user wor dwide.

During this guarantee period, a defects that affect the practica va ue of the device

and resu t from materia or manufacturing defects or processing errors wi be

remedied at the cost of the manufacturer with own discretion by repair or rep acement

fo owing the terms and imitations be ow. Optica deficiencies are exc uded from

these guarantee terms. A products and parts of products that were rep aced become

property of CLAUSS. Repair and partia y rep acement does not pro ong the origin-

a y warranty period.

For repair or rep acement, the product has to be send in to the manufacturer in suffi-

cient packing. The costs occurring for a safe transport to the manufacturer and back

to the customer has to be payed by the customer. Customers bear the transportation

risk. Therefore, we recommend to take out a suitab e and sufficient transportation in-

surance. Furthermore, the returned products have to be immediate y checked if they

are intact and free of defects after receiving in order to observe existing dead ines for

indication and comp aint. Removab e media and potentia accessories have to be re-

moved before submitting the product for exercising the warranty c aim in order to

avoid their oss and data oss. Insta ed software, fi es and programs have to be se-

cured before repair, backuped and re-insta ed after the repair again. Purchased parts

and components by other manufacturers are exc uded from guarantee by CLAUSS. In

these cases, the requirements of the particu ar manufacturers app y.

Andere Handbücher für Rodeon

Inhaltsverzeichnis

Andere Clauss Drehscheibe Handbücher

Clauss

Clauss Rodeon JumboDrive Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung