Clear One MAXAttach Wireless Bedienungsanleitung

To Connect MAXAttach™

1. Connect the Cat. 5 cable from the Link Out jack on the base unit to the Link In

jack on the conferencing pod.

2. Connect the base unit to the telephone jack using the RJ-11 telephone cable.

3. Plug the the base unit directly* into a wall-mounted electrical outlet.

* International models of the MAXAttach base unit do not plug directly into the electrical outlet.

A separate power supply cord is included.

To Connect Additional Units

1. Connect the 12' Cat. 5 cable to the Link Out jack on the first phone and the

Link In jack on the second phone.

2. Continue linking additional MAXAttach phones in the same fashion. A total of

four conferencing pods (one MAXAttach and two MAX Expansion kits) may be

connected.

CONFERENCE PHONE SETUP

800-158-055 Rev. 1.0

ClearOne Communications ~ 1825 Research Way, Salt Lake City, UT 84119 ~ 1-800-945-7730 ~ www.clearone.com

Getting Started Guide

tel 1-800-283-5936

1-801-974-3760

fax 1-801-977-0087

e-mail tech.suppor[email protected]

To Access the Programming Menus

Press and hold until appears on the LCD screen.Then press the key that

corresponds with the desired menu option and follow the instructions below.

PROGRAMMING OPTIONS

MAXAttach™

Conferencing Phones

TECHNICAL SUPPORT

*If a number has already been programmed, use CLEAR to delete the old number before entering the new number.

Ringer Melody

Dialing Mode

Flash Duration

Local Number*

Conference*

Service*

Key ProgrammingMenu Option

1-5 to select a new melody. Press to save selection.

Press . The current melody selection flashes. Press

1 for tone, 2 for pulse. Press to save selection.

Press . The current dialing selection flashes. Press

Press . Enter the phone number that you want the

Conference key to dial. Press to save the number.

duration. 1 = 600ms, 2 = 300ms, 3 = 150ms, 4 = 100ms, 5 = 80ms.

Press . The current duration flashes. Press 1-5 to select

Press to save selection.

appear on the LCD screen when the phone is in standby.

Press . Enter the phone number that you want to

Press to save selection.

Press . Enter the phone number that you want the

key to dial. Press to save the number.

Country

Press . Press the number key that corresponds with the

desired country. 1 = US/Canada/China/Japan/Mexico/Singapore,

2 = Europe CTR 21,3 = Australia, 4 = S. Africa,5 = Brazil, 6 = New Zealand,

7 = South Korea. Press to save the country setting.

Press CLEAR to exit Programming mode.

CAUTION: Read the Safety Information in the user manual.

25' Cat. 5 cable

RJ-11

telephone

cable

To Link In

To Link Out

Rear of conferencing pod

Rear of base unit

12' Cat. 5 cable

From Link Out

To Link In

To Link Out on Base Unit

25' Cat. 5 cable

MMAAXXAAttttaacchh

Icon Description

Phone Program

Mute

Phonebook

Ringer Off

Scroll

Icon Description

Getting Started Guide

To Make a Call

1. Press the ON/OFF key to activate

the phone. You will hear a dial tone.

2. Dial the number as you would on a

standard phone. The number appears

on the LCD screen.

You can also predial the number

while in Standby mode and press the

ON/OFF key to connect the call.

To add a pause to the number you

are predialing, press and hold the

pound (#) key.

To Answer a Call

•Press any key.

When there is an incoming call, the

phone rings (unless the ringer is

turned off) and the phone LEDs and

phone icon on the LCD screen flash.

To End a Call

• Press the ON/OFF key.

To Turn On/Off the Ringer (In Standby)

• Press and hold the star key (*).

To Adjust Ringer Volume

•While the phone is ringing, press

VOLUME UP or VOLUME DOWN.

• While the phone is inactive, press

VOLUME UP or VOLUME DOWN.The

ringer melody will play once at the

new level.

To Access Your Conferencing Service

• Press the CONFERENCE key. This

feature must be programmed before

use.

To Access Your Service Center

• While in Standby mode, press and

hold the 0key for 2 seconds.This

feature must be programmed before

use.

To Store a Number in the Phonebook

1. Enter the number while phone is in

standby (inactive) mode.

2. Press and hold the PHONEBOOK key

until the Phonebook and Program

icons appear.

3. Assign a Phonebook location (0–9)

by pressing the corresponding

number key.

4. Press PHONEBOOK again to save the

entry. You will hear a confirmation

tone.

5. To exit Phonebook Edit mode before

saving the entry, press CLEAR.

To Make a Call Using the Phonebook

1. Press the PHONEBOOK key.

2. Press the number (0-9) that

corresponds with the stored phone

number you want to dial.The number

will be displayed on the LCD screen.

3. Press the ON/OFF key to dial the

number.

The phone icon appears when the phone is

active.

The Phonebook and Program icons.

Ringer off icon.

USING THE PHONE

KEYPAD FUNCTIONS

LCD DISPLAY

Andere Handbücher für MAXAttach Wireless

Andere Clear One Konferenztelefon Handbücher

Clear One

Clear One MAX EX Bedienungsanleitung

Clear One

Clear One MAX IP Bedienungsanleitung

Clear One

Clear One MAX IP Bedienungsanleitung

Clear One

Clear One MAX EX Bedienungsanleitung

Clear One

Clear One Audio Conferencing Service-Handbuch

Clear One

Clear One max wireless Bedienungsanleitung

Clear One

Clear One MAX IP Service-Handbuch

Clear One

Clear One MAX IP Bedienungsanleitung

Clear One

Clear One Chat 50 Installations- und Benutzerhandbuch

Clear One

Clear One MAX IP Bedienungsanleitung

Clear One

Clear One MAXTM EX Telephone Bedienungsanleitung

Clear One

Clear One MAX IP Service-Handbuch

Clear One

Clear One MAX IP Bedienungsanleitung

Clear One

Clear One MAX WIRELESS Bedienungsanleitung

Clear One

Clear One MAX WIRELESS Bedienungsanleitung

Clear One

Clear One MAX WIRELESS Bedienungsanleitung

Clear One

Clear One MAXTM EX Telephone Bedienungsanleitung

Clear One

Clear One MAX EX Bedienungsanleitung

Clear One

Clear One MAX EX Bedienungsanleitung

Clear One

Clear One MAXAttach Wireless Bedienungsanleitung

Clear One

Clear One Chat 50 Betriebsanleitung

Clear One

Clear One Chat 50 Betriebsanleitung

Clear One

Clear One CHAT 150 Bedienungsanleitung

Clear One

Clear One MAX WIRELESS Bedienungsanleitung

Beliebte Konferenztelefon Handbücher anderer Marken

Polycom

Polycom SoundStation 2W Service-Handbuch

Vixtel

Vixtel glass 1100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific OS200 Bedienungsanleitung

Polycom

Polycom SoundStation IP 4000 Bedienungsanleitung

AbleNet

AbleNet Prism C Bedienungsanleitung

Albrecht

Albrecht Multicom Bedienungsanleitung

Fortinet

Fortinet FortiFone FON-C70 Bedienungsanleitung

Avaya

Avaya B159 Series Bedienungsanleitung

Konftel

Konftel Konftel 55W Bedienungsanleitung

Mitel

Mitel 6867i Premium Bedienungsanleitung

Polycom

Polycom SoundStation 2W Service-Handbuch

Yealink

Yealink CP920 Bedienungsanleitung

Polycom

Polycom SoundStation IP 6000 Bedienungsanleitung

Mitel

Mitel 6970 IP Bedienungsanleitung

Yealink

Yealink CPE860 Fehlerbehebungshandbuch

Konftel

Konftel 60W Bedienungsanleitung

Mitel

Mitel UC360 Bedienungsanleitung

Cortelco

Cortelco CP4400 Series Einrichtungshandbuch