Clear One COLLABORATE ROOM PRO Bedienungsanleitung
COLLABORATE Room Pro
with Beamforming Microphone Array
Professional Conferencing
Quick-Start Guide
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY.............................. 1
COMPONENTS INCLUDED........................................................... 2
MAKING THE CONNECTIONS...................................................... 4
ConneCtion Diagram .................................................................... 4
Beamforming miCrophone array power ConneCtion ..................... 5
ir reCeiver ConneCtion ............................................................... 5
USB aDapter ConneCtionS........................................................... 6
aUDio oUtpUt ConneCtion optionS ............................................... 7
MOUNTING THE BEAMFORMING MICROPHONE ARRAY ......... 8
AUDIO OPTIMIZATION AND CONTROL....................................... 9
optimizing for hDmi aUDio ........................................................ 10
USING THE BEAMFORMING MICROPHONE ARRAY WITH THE
COLLABORATE ROOM PRO ...................................................... 11
volUme & mUte .......................................................................... 11
PART NUMBERS.......................................................................... 13
CLEARONE CONTACTS.............................................................. 14
Table of Contents
QUICK-START GUIDE
1
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
The Beamforming Microphone Array is a 24 microphone device with
beamforming and adaptive steering technology that provides high-
quality audio to a COLLABORATE Room Pro.
The Beamforming Microphone Array connects through an Expansion
Bus (E-bus) port to the USB adapter, which in turn connects to
the COLLABORATE Room Pro through a standard USB port. The
Beamforming Microphone Array is identified as an audio input to the
COLLABORATE Room Pro. The power for the Beamforming Microphone
Array is supplied through a Power-Over-Ethernet (PoE) connection.
The Beamforming Microphone Array is supported for use as a ceiling-
mounted, wall-mounted or tabletop assembly.
The latest version of the COLLABORATE Pro firmware and the
COLLABORATE Room Pro Installation and Setup Guide can be found on
the ClearOne website at:
http://www.clearone.com/resources#video_conferencing
The latest version of the Beamforming Microphone Array firmware and
the Beamforming Microphone Array Installation Guide can be found on
the ClearOne website at:
http://www.clearone.com/resources#professional_microphones
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
2
COMPONENTS INCLUDED
The COLLABORATE Room Pro with Beamforming Microphone Array
SKU’s include the following:
COLLABORATE Room Pro 520/620
930-401-862 (520) or 930-401-872 (620)
COLLABORATE Room Pro 510 or 610
codec with power supply and remote
control
910-401-199
UNITE FHD camera and power supply
910-151-806
USB Adapter (CONVERGE USB) and
power supply
QUICK-START GUIDE
3
(Black Beamforming Microphone
Array Shown)
910-001-003-B-C (Black) or
910-001-003-C (White)
Beamforming Microphone Array
910-0002-004
IR Receiver with 6 ft. cable
910-001-004
Beamforming Microphone PoE Power
Supply & Cable kit
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
4
MAKING THE CONNECTIONS
Connect the Beamforming Microphone Array unit to the USB adapter
via an E-bus connection from the Link OUT using a CAT5-24AWG
solid conductor RJ45 cable To the USB adapter Link IN connector.
Connect the USB adapter to the COLLABORATE Room Pro with a USB
connection.
ConneCtion Diagram
1080p or 720p Digital Display
USB Adapter
Power
(General PoE
Adapter)
To Link IN
COLLABORATE Room Pro
1080p Camera Video
USB
Mic
Audio
From
Link
OUT Beamforming
Microphone
Array
IR
Receiver
QUICK-START GUIDE
5
NOTE: Power on the COLLABORATE Room Pro before you connect
the USB Adapter to any port.
If this is not followed, it will often result in failure of the
COLLABORATE Room Pro to boot properly.
ir reCeiver ConneCtion
If the Collaborate Room Pro codec is placed in a closet or rack or not in
a line-of-sight location, it is recommended to use the external IR Receiver
for the proper function of the remote control.
Beamforming miCrophone array power ConneCtion
Make the Beamforming Microphone Array power connection on the
underside of the array in the labeled PoE connector from the provided
PoE power supply or a standard Power-over-Ethernet switch.
NOTE: The PoE connection is only for power; audio signals are sent
to the USB adapter via the E-bus Link OUT connection. The Link IN
and the Device ID selector rotary switch are not used.
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
6
USB aDapter ConneCtionS
The audio connection from the Beamforming Microphone Array to the
COLLABORATE Room Pro is made through the USB Adapter. The cable
from the Beamforming Microphone array Link OUT goes to the USB
Adapter Link IN as shown below.
From Beamforming Microphone Array Link OUTTo COLLABORATE Room Pro USB Port
To 12VDC Power Adapter
The USB cable from the USB Adapter is plugged into one of the USP
ports on the COLLABORATE Room Pro system unit.
Power to the USB Adapter is supplied by an included 12VDC power
adapter.
QUICK-START GUIDE
7
aUDio oUtpUt ConneCtion optionS
There are three audio output options, accessed from the back of the
COLLABORATE Room Pro, for connecting the audio.
1. Balanced Audio output to an amplifier that is connected to speakers
2. Line output to powered speakers
3. HDMI output to the monitor receiving the signal
Balanced Audio Output
HDMI Combined Video
and Audio Output
Line Audio Output
Audio optimization procedures to for each of the output options is
detailed later in this guide.
COLLABORATE ROOM PRO AND
THE BEAMFORMING MICROPHONE ARRAY
8
MOUNTING THE BEAMFORMING MICROPHONE
ARRAY
The array can be ceiling-mounted in either a suspended or solid ceiling,
or on a wall-mount assembly with the PoE and E-bus wiring passing
through the mounting assembly and plugging into the Beamforming
Microphone Array unit. Tabletop use is also supported with PoE and
E-bus cables attached under the unit. Detailed instructions are included
in the Beamforming Microphone Array Installation Guide available on the
ClearOne website:
http://www.clearone.com/resources#professional_microphones
Andere Handbücher für COLLABORATE ROOM PRO
2
Inhaltsverzeichnis
Andere Clear One Konferenzsystem Handbücher
Clear One
Clear One Converge Pro 880 Bedienungsanleitung
Clear One
Clear One Aura VERSA PRO 50 Bedienungsanleitung
Clear One
Clear One ClearOne RAV 600 Bedienungsanleitung
Clear One
Clear One AP400 Bedienungsanleitung
Clear One
Clear One CLOCKAUDIO TS-001 Bedienungsanleitung
Clear One
Clear One Audio Conferencing Bedienungsanleitung
Clear One
Clear One Converge 560 Bedienungsanleitung
Clear One
Clear One COLLABORATE Pro 300 Bedienungsanleitung
Clear One
Clear One XAP 400 Bedienungsanleitung
Clear One
Clear One COLLABORATE LIVE 200 Bedienungsanleitung
Clear One
Clear One COLLABORATE Versa Pro 50 Bedienungsanleitung
Clear One
Clear One CONVERGE Huddle Bedienungsanleitung
Clear One
Clear One ClearOne RAV 600 Bedienungsanleitung
Clear One
Clear One ClearOne RAV 600 Handbuch
Clear One
Clear One CHATAttach 150 Bedienungsanleitung
Clear One
Clear One Versa Mediabar Aura Bedienungsanleitung
Clear One
Clear One Converge Pro 880 Montageanleitung
Clear One
Clear One Converge Pro 880 Bedienungsanleitung
Clear One
Clear One CONVERGE PRO 2 Bedienungsanleitung
Clear One
Clear One MAX EX Bedienungsanleitung
Beliebte Konferenzsystem Handbücher anderer Marken
Kramer
Kramer VIA GO Bedienungsanleitung
AVT
AVT MAGIC AC1 Go Bedienungsanleitung
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung
Sony
Sony PCS-I150 Bedienungsanleitung
Middle Atlantic Products
Middle Atlantic Products VTC Series Bedienungsanleitung
Prentke Romich Company
Prentke Romich Company Vanguard Plus Leitfaden
