Clear One 910-3200-503 Bedienungsanleitung
Wall Mount Kit for Touch Panel Controller
Installation Guide
GETTING STARTED....................................................................... 1
SKUS USED ................................................................................... 2
CONNECTIONS ............................................................................. 3
Powering aTouch Panel conTroller................................................ 3
communicaTion connecTions............................................................. 3
WALL MOUNT INSTALLATION ..................................................... 4
ParTs received................................................................................. 4
Tools required................................................................................ 5
wall mounTing Procedure............................................................... 6
CLEARONE CONTACTS.............................................................. 13
Table of Contents
Wall Mount InstallatIon GuIde
1
GETTING STARTED
Congratulations on purchasing your CONVERGE®Pro 2 (CP2) Touch
Panel Controller. The ClearOne Touch Panel Controller is a highly intuitive
10-inch, touch-screen device designed for CP2, and allows users to
control their audio conference, including managing contacts and placing
and controlling calls.
IMPORTANT: The Touch Panel Controller can only be used with
CP2 systems. It is not compatible with first generation CONVERGE
Pro systems.
The Touch Panel Controller connects with the CP2 through a RS232 port,
Ethernet port, or Wi-Fi. Power for the Touch Panel Controller is supplied
by a DC power supply, Power-Over-Ethernet (PoE), or P-Link connection.
For instruction on how to connect the Touch Panel Controller to CP2 in
the ClearOne Dialer software and more, go to the ClearOne website:
http://www.clearone.com/resources#professional_audio
Touch Panel conTroller
2
TOUCH PANEL CONTROLLER
SKUS USED
The following products or kits may be used in the Touch Panel Controller
installation:
• 910-3200-501 Touch Panel Controller for CP2
• 910-3200-502 Tabletop Mount Kit
• 910-3200-503 Wall Mount Kit
• 910-3200-504-50 Serial RS232 DB9 Male to Female cable – 50 ft.
• 910-3200-504-100 Serial RS232 DB9 Male to Female cable – 100 ft.
• 910-3200-505 Serial RS232 DB9 Female to Phoenix Euroblock
Adapter – 1 ft.
• 910-001-004 PoE power supply for 1 device - 1 x PoE power supply,
1 x 6 ft. power cord, 2 x 25 ft. plenum rated CAT5e cables
• 910-3200-202 PoE power supply kit for 3 devices – 1 x PoE power
supply, 1 x 6 ft. power cord, 2 x 25 ft. plenum rated CAT6 cables
• 910-3200-204-50 RJ45 CAT6, twisted pair, solid core, factory
terminated, plenum rated cable – 50 ft.
• 910-3200-204-100 RJ45 CAT6, twisted pair, solid core, factory
terminated, plenum rated cable – 100 ft.
• 910-3200-204-150 RJ45 CAT6, twisted pair, solid core, factory
terminated, plenum rated cable – 150 ft.
• 910-3200-204-200 RJ45 CAT6, twisted pair, solid core, factory
terminated, plenum rated cable – 200 ft.
Wall Mount InstallatIon GuIde
3
WALL MOUNT INSTALLATION GUIDE
CONNECTIONS
This section explains the connections made in Touch Panel Controller
installations.
Powering aTouch Panel conTroller
The Touch Panel Controller can be powered by:
• included power adapter
• standard PoE injector or PoE Ethernet switch
• P-Link from CP2 or other P-link device (carries only power)
communicaTion connecTions
• RS232 – A Touch Panel Controller can connect to a CP2 or GPIO/
USB expanders via serial RS232 cables, up to 150ft.
• Ethernet – A Touch Panel Controller can connect to a CP2 in
an Ethernet network via a standard Ethernet switch, up to 300ft
between the controller and switch.
• Wi-Fi – A Touch Panel Controller unit can be fitted with the included
Wi-Fi antenna and configured to connect to a Wi-Fi network.
Touch Panel conTroller
4
WALL MOUNT INSTALLATION
Parts Received
The following parts are delivered with the Wall Mount Kit:
QTY 4
#8-15 x 1-1/2” wood screw
QTY 4
Flat washer for #8 screw
QTY 4
TPEN-10 anchor
QTY 1
Wall Mount Plate
QTY 1
Controller Mount Plate
QTY 1
Security Screw
Wall Mount InstallatIon GuIde
5
WALL MOUNT INSTALLATION GUIDE
Verify that you have all the parts required to complete your installation.
When you open the shipping package(s) for the first time, please check
that all items purchased are included. If any of the items (according to
your customer order) are missing or damaged, contact your ClearOne
distributor immediately.
#1 Phillips
screwdriver
Tools Required
The following tools may be required for Wall Mount installation of the
Touch Panel Controller. You will also need other tools for installing
fasteners (not included in the kit) to hold the Wall Mount Plate to the wall
where the Touch Panel Controller is to be installed.
Touch Panel conTroller
6
Wall Mounting Procedure
A wall-mounted Touch Panel Controller must be placed at eye level on a
wall facing the intended conference participants.
The Wall Mount Plate can be mounted to either a solid or hollow wall.
Slotted holes for
mounting to wall with
#8 Screws
Security Screw
Slotted holes for Controller
Mounting Plate hooks
Wall Mounting Plate
To be attached to the wall
Controller Mounting Plate
To be attached to the Touch Panel Controller
Slotted holes for mounting
to controller screws
Fastening hooks
for Wall Mounting
Plate slotted holes
Locate and mark for drill holes where the Wall Mounting Plate will attach
to the wall. Use the following dimensions for the drill holes:
75mm
75mm
100mm
100mm
Touch Panel conTroller
8
Attach the Wall Mount Plate to the wall with #8 screws, anchors, and
washers included in the mount kit.
NOTE: If you are using a third-party mount, you must use a standard
VESA 75 mount (mounting holes are 75mm apart).
Drill holes to receive the anchors.
NOTE: Take care while drilling and installing the anchors so the wall
material does not tear out and weaken the attachment.
NOTE: The mount supports both 75mm x 75mm mounting and
100mm x 100mm mounting, but the Touch Panel Controller has only
75mm x 75mm screw holes for mounting.
Inhaltsverzeichnis
Andere Clear One Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
