ClearCube M2010S Bedienungsanleitung

www.clearcube.com

M2010S Server and Chassis

User's Guide

ClearCube Technology, Inc.

Manual Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.ClearCube.com.

ClearCube reserves the right to make changes to the product described in this manual at any time

and without notice. This product, including software, if any, and documentation may not, in whole

or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine

without prior written consent.

IN NO EVENT WILL ClearCube BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, ClearCube SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from ClearCube Technology, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

iii

P r e f a c e

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the M2010S. Installation and

maintenance should be performed by experienced technicians only.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the M2010S serverboard and

the chassis, which comprise the M2010S.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the M2010S into a rack and

check out the server conguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

M2010S.

P r e f a c e

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the M2010S serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the server chassis. You should fol-

low the procedures given in this chapter when installing, removing or reconguring

SATA or peripheral drives and when replacing system power supply units and

cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: Intel HostRaid Setup Guidelines

Appendix D: Adaptec HostRaid Setup Guidelines

Appendix E: System Specications

T a b le o f C o n te n ts

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

UIO.................................................................................................................. 1-2

Onboard Controllers/Ports .............................................................................. 1-3

ATI Graphics Controller................................................................................... 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

Serial ATA Subsystem ..................................................................................... 1-3

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System ............................................................................................... 1-4

1-4 Contacting ClearCube..................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ............................................................................................................. 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Chassis Rails............................................................................. 2-4

Installing the Rack Rails: ................................................................................ 2-6

Installing the Server into the Rack.................................................................. 2-6

v i

T a b le o f C o n te n ts

Installing the Server into a Telco Rack ........................................................... 2-6

2-5 Checking the Serverboard Setup.................................................................... 2-8

2-6 Checking the Drive Bay Setup...................................................................... 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Overheat/Fan Fail: .......................................................................................... 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Installing the Processors and Heat Sinks....................................................... 5-5

Memory Support.............................................................................................. 5-9

5-7 Adding PCI Add-On Cards............................................................................ 5-10

5-8 Serverboard Details .......................................................................................5-11

M2010S Serverboard Quick Reference........................................................ 5-12

5-9 Connector Denitions ................................................................................... 5-13

5-10 Jumper Settings ............................................................................................ 5-19

v ii

T a b le o f C o n te n ts

5-11 Onboard Indicators........................................................................................ 5-23

5-12 Floppy, IDE, and SATA Ports ........................................................................ 5-24

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

SATA Drive Installation.................................................................................... 6-5

Hard Drive Backplane ..................................................................................... 6-6

DVD-ROM and Floppy Drive Installation ........................................................ 6-7

6-5 Power Supply .................................................................................................. 6-8

Power Supply Failure...................................................................................... 6-8

Removing/Replacing the Power Supply.......................................................... 6-8

Chapter 7 Advanced Serverboard Setup

7-1 Introduction...................................................................................................... 7-1

7-2 Running Setup ................................................................................................ 7-2

7-3 Main BIOS Setup ............................................................................................ 7-2

7-4 Advanced Setup.............................................................................................. 7-7

7-5 Security ......................................................................................................... 7-24

7-6 Boot............................................................................................................... 7-25

7-7 Exit ................................................................................................................ 7-26

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C Intel HostRAID Setup Guidelines

Appendix D Adaptec HostRAID Setup Guidelines

Appendix E System Specications

Notes

v iii

T a b le o f C o n te n ts

Chapter 1

Introduction

1-1 Overview

The ClearCube M2010S is a high-end server that include the following hardware

components:

Three (3) 8-cm hot-swap chassis fans

One (1) air shroud

Two (2) CPU passive heatsinks

One (1) DVD-ROM drive

Two (2) 3.5" dummy drive trays

One (1) DVD-ROM drive

One (1) front control panel cable

One (1) rail set

SATA Accessories

One (1) SATA backplane

One (1) 2-ft SATA cable

Two (2) 35-mm SATA cables

Two (2) 48-cm SATA cables

One (1) 70-cm SATA cable

Two (2) SATA SGPIO cables

Eight (8) SATA hot-swap drive carriers

(The chassis has eight carriers but only six SATA drives are supported.)

•

Chapter 1: Introduction

1-1

1-2

ClearCube M2010S User's Guide

1-2 Serverboard Features

At the heart of the ClearCube M2010S lies a dual processor serverboard based

on the Intel 5400 chipset and designed to provide maximum performance. Below

are the main features of the serverboard. (See Figure 1-1 for a block diagram of

the 5400 chipset).

Processors

The M2010S serverboard supports single or dual LGA771 type Intel Xeon proces-

sors at a FSB speed of 1600/1333/1066 MHz. (Quad-Core Intel Xeon Processor

5400/5300LV or Dual-Core Intel Xeon Processor 5200/5100LV sequence, both

CPUs must be of the same type.)

Memory

The M2010S serverboard has sixteen 240-pin DIMM slots that can support up to

128 GB of FBD (Fully Buffered DIMM) ECC DDR2-800/667/533 SDRAM. Both 1.5V

and 1.8V memory are supported. The memory operates in a 4-way interleaved

congurations and requires modules of the same size and speed to be installed

two at a time. See Chapter 5 for details.

Serial ATA

A SATA controller is integrated into the ESB2 (South Bridge) portion of the 5400

chipset to provide a six-port 3 Gb/s Serial ATA subsystem, which is RAID 0, 1, 10

and 5 supported. The Serial ATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the Serial ATA drives.

PCI Expansion Slots

The M2010S serverboard has three PCI-Express x8 slots (two are Gen 2), one

PCI-Express x4 slot (in a x8 slot), two 64-bit 133/100 MHz PCI-X slots and one

UIO slot (see below).

UIO

The M2010S serverboard is a specially-designed serverboard that features UIO

(Universal I/O) technology. UIO serverboards have a PCI-Express x8 connector

that can support any one of several types of UIO card types (low-prole only) to

add SAS ports, additional LAN ports, and more, to the serverboard. This allows

the user to tailor the serverboard to their own needs.

Inhaltsverzeichnis

Andere ClearCube Server Handbücher

ClearCube

ClearCube V5340 Bedienungsanleitung

ClearCube

ClearCube I8330 Bedienungsanleitung

ClearCube

ClearCube I8800 Technisches Handbuch

ClearCube

ClearCube CD9424 Bedienungsanleitung

ClearCube

ClearCube I9420 Bedienungsanleitung

ClearCube

ClearCube I9420 Bedienungsanleitung

ClearCube

ClearCube R4300 Bedienungsanleitung

ClearCube

ClearCube A6108 Bedienungsanleitung

ClearCube

ClearCube Thin Client CD8831 Bedienungsanleitung

ClearCube

ClearCube R1300 Bedienungsanleitung

ClearCube

ClearCube R2200 Bedienungsanleitung

ClearCube

ClearCube I8440 Bedienungsanleitung

ClearCube

ClearCube A1010 Technisches Handbuch

ClearCube

ClearCube A2100 Technisches Handbuch

ClearCube

ClearCube SmartVDI-110 Bedienungsanleitung

ClearCube

ClearCube R1350 Bedienungsanleitung

ClearCube

ClearCube A1410 Bedienungsanleitung

ClearCube

ClearCube R2200 Technisches Datenblatt

ClearCube

ClearCube R2200 Betriebsanleitung

ClearCube

ClearCube CD8620 series Bedienungsanleitung

ClearCube

ClearCube R1350 Technisches Handbuch

ClearCube

ClearCube A1010 Bedienungsanleitung

ClearCube

ClearCube I8330 Bedienungsanleitung

ClearCube

ClearCube R1350 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung