ClearView HD4660 Bedienungsanleitung

HD4660

DVB-T HD

MODULATOR

User Manual

HD4660 Manual Rev 1.0

TABLE OF CONTENT

1. GENERAL 2

1.1 Description.....................................................................................................................2

1.2 Specifications.................................................................................................................3

2. INSTALLATION 4

2.1 What’s in the Box ........................................................................................................4

2.2 Connection ..................................................................................................................4

2.2.1 DEVICE Programming and Setup 4

3OPERATING INSTRUCTIONS 5

3.1 Description of controls and components ......................................................................5

3.2 Starting ..........................................................................................................................6

3.2.1 Beginning Setup 6

3.2.2 Step 1: Login 6

3.2.3 Step 2: Right Click and Select “Status” 7

3.2.4 Step 3: Setting Tab 8

3.2.5 Step 4: Local Save 8

3.2.6 Step 5: IP Configuration Tab 9

3.2.7 Step 6: Save IP Configuration 9

3.2.8 Step 7: Administration 9

4MENU TREE 10

4.1 Menu Tree of Front panel ..........................................................................................10

4.2 Menu Tree of Web UI .................................................................................................11

5MODULATOR CONFIGURATION VIA FRONT PANEL LCD 12

HD4660 Manual Rev 1.0

DIGITAL MODULATOR

1. GENERAL

1.1 Description

The HD4660 module able to generate a signal in DVB-T format (Digital Terrestrial

Television) from HDMI and YPbPr (RCA) and CVBS(RCA) input.

HD4660 is MPEG-4 and MPEG-2 encoding, DVB-T modulation integrated device to

convert HDMI and YPbPr (RCA) and CVBS(RCA) signal to DVB-T RF out.

The HD4660 module adjusts the compression rate to the available bandwidth, using

the modulation DVB-T parameters.

HD4660 Manual Rev 1.0

1.2 Specifications

INPUT

Video Input

HDMI:1080P 25/30, 1080i 50/60 Max,

YPbPr(1080i,720P, 576i/P,480i/P),

CVBS: NTSC, PAL

Video Input Level

1.0 V p-p (CVBS)

Video Mode PAL / NTSC (CVBS)

Audio Input Stereo (L/R)

Audio Input Level

3 V p-p (L/R)

Input Connectors Video (RCA) / Audio (RCA) / HDMI

OUT PUT

Frequency Range 177 -858 MHz

Output Level 100 dBuV

Channel Bandwidth 6,7,8 ,7-8 MHz

RF Level Adjustment 0~-36 dB typ.

Attenuation step

2dB per step

MER 30 dB typically /

MODULATION

Video Resolution 1080P25, 1080P30,1080i,576i,480i

Video Compression HD: H.264 AVC / [email protected], SD: MPEG-2/ MP@ML

Audio Compression MPEG2, AAC

Video Bit Rate 6 Mbit/S Max

Audio Bit Rate 384Kbits

Editable Field

Service Name, TS ID, Network ID, Original NET ID,

LCN, Network Name

Carrier (OFDM Mode) 2K/8K

Guard Intervals 1/4, 1/8, 1/16, 1/32

Code Rate (FEC) 1/2,2/3,3/4, 5/6, 7/8

Constellations 64 QAM /16 QAM / QPSK

MANAGEMENT / CONTROL

Front panel LCD control 6 Local keys on front panel

Web Management RJ-45 Ethernet port

GENERAL

Power Supply AC 100~240V 50/60Hz

Consumption 25 W

Languages English

Dimensions 19” x 12.5” x 1.75”

Weight 2.8Kg

*Specifications subject to change without prior notice.

HD4660 Manual Rev 1.0

2. INSTALLATION

2.1 What’s in the Box

One HD4660 Encoder / Modulator

One power cable

2.2 Connection

The HD4660 unit comes standard with HDMI, Component, and Composite video inputs.

Component Connection: Connect the Y (Green), Pb (Blue), and Pr (Red) video source cable

to the unit’s Component input ports. If using a Composite Video source, use a 75Ω coaxial

cable with RCA connectors to connect the video source to the unit’s CVBS port.

Use RCA cables to connect the audio source to the red / white AUDIO L and AUDIO R

INPUT jacks.

Use a quality 75Ω coaxial cable with “F” connectors from the unit’s RF OUT jack to the

distribution system or directly to a television.

Connect the power cord to an appropriately rated AC power outlet.

Once connected to power, the device turns on and it takes about 20 seconds to be

operational. Then the message “Initial Please wait” appears on the display. After 60 seconds

the message “Status (Enter) & IP Address 192.*.*.*” on the display.

2.2.1 DEVICE Programming and Setup

Connect an Ethernet cable directly (no Cross Over cable required) to the Ethernet Port

on the rear panel of the encoder and then connect the Ethernet cable to an Ethernet switch

or connect an Ethernet Cable to your PC.

3OPERATING INSTRUCTIONS

3.1 Description of controls and components

<Front>

<Rear>

HD4660

Model name

LCD Display

Configuration and system status

Key PAD / Home

Return to start menu.

Key PAD / Left & Right

Move Right / Left between menu / characters.

Key PAD / Upper & Down

Increase / Decrease value of the figure / field.

Key PAD / Enter

Select parameter / menu.

7 Audio/Video Input * 4

HDMI/ Component YPrPb(RCA) / Composite

CVBS(RCA)

RF output

“F”-Female 75Ω, +45dBmV Typical

Ethernet Port

RJ-45,GbE / IE9, Chrome

AC input

AC 100~240V / 50~60Hz

ATTENTION!

FOR THIS CONFIGURATION YOU SHOULD USE OUTPUT FREQUENCIES DIFFERENT FROM THE ONES THAT YOUR TV IS CURRENTLY USING

HD4660 Manual Rev 1.0

3.2 Starting

3.2.1 Beginning Setup

DEVICE Programming and Setup

1. Apply power.

2. Connect Audio / Video source

Connecting to the GUI Interface:

1. Connect an Ethernet cable directly to the Ethernet port on the rear panel of the encoder

and then connect the Ethernet cable to an Ethernet switch /router or connect an

Ethernet Cable to your PC.

2. Using a Windows-based PC Select Windows Icon

3. Check IP address from front panel display.

4. Key in the IP address in web browser.

3.2.2 Step 1: Login

Default User Name: admin

Default Password: 0000

Encoder Programming and Setup via GUI Interface:

I n i t i a l . . . .

P l e a e s w a i t . . . .

S t a t u s ( E n t e r )

1 9 2 . 1 6 8 . 1 . 1 3 8

HD4660 Manual Rev 1.0

3.2.3 Step 2: Right Click and Select “Status”

Overview Page of Encoder of RF.

Network Status

Country

Rack Position

Original Net ID

Network ID

Network Name

TS ID

AUSTRALIA

OFF

8234

12801

Private Network

128

Channel & Encode Status

No.

Name

Service ID

LCN

ON/OFF

Video Output

Audio Output

Video Input

Input Video Type

Status

CH 1

TV1

101

MPEG-2

CVBS

PAL 576i

CH 2

TV2

102

MPEG-2

CVBS

PAL 576i

CH 3

TV3

103

MPEG-2

CVBS

PAL 576i

CH 4

TV4

104

MPEG-2

CVBS

PAL 576i

No.

PMT

Video PID

Audio PID

CH 1

CH 2

CH 3

CH 4

RF Status

Frequency

Constellation

Guard

Interval

Code

Rate

FFT

Carrier

Bandwidth

Encode

Rate(Kbps)

Power

ON/OFF

CH29 536.5

MHz

64QAM 1/32 7/8 8K 7 MHz 27686 46

dBmV

HD4660 Manual Rev 1.0

3.2.4 Step 3: Setting Tab

Use the Setting Setup Page to set the Network setting , and channel & encode setting, and RF

setting.

Please check the resolution of the source side, and then check the item of

input video type at Channel & Encode Setting page to make sure both of

them have same setting value.

3.2.5 Step 4: Local Save

Perform apply once all parameters are set.

Changes made to an individual setup tab may require the installer to perform a apply to the

device if you are only making changes to one parameter of the encoder.

HD4660 Manual Rev 1.0

3.2.6 Step 5: IP Configuration Tab

Use the IP Setup Tab to configure the device’s IP address, Mask, Gateway,

3.2.7 Step 6: Save IP Configuration

Perform apply once all parameters are set.

3.2.8 Step 7: Administration

Selecting “Reboot” will automatically reset all saved settings back to factory default

settings. All saved settings will be lost.

Use the Admin Setup Tab to set the device’s reboot, configuration, software update,

password change,

ADMINISTRATION PAGE

FUNCTIONS ACTIONS

Reboot Reboot device. All unsaved settings will be lost.

Configuration User can upload the file with pre-

saved configuration settings

to device.

Software update

Upload a saved firmware file

Password Change Create and save new password for GUI

To upload a configuration file- simply click “Choose File” then locate the file you want to

upload. Click “Upload” to install the configuration files. This function is helpful to the

installer when installing a large number of encoders in a single system.

Inhaltsverzeichnis

Andere ClearView Modulator Handbücher

ClearView

ClearView SD4260 Bedienungsanleitung

ClearView

ClearView HD4112 Bedienungsanleitung

ClearView

ClearView HD168Bi Bedienungsanleitung

ClearView

ClearView SD4650 Bedienungsanleitung

ClearView

ClearView KR423I Bedienungsanleitung

ClearView

ClearView HD168Bi Bedienungsanleitung

ClearView

ClearView HD1112+ Technisches Datenblatt

Beliebte Modulator Handbücher anderer Marken

axing

axing AVM 5-00 Bedienungsanleitung

IKUSI

IKUSI MAC-HOME HD Bedienungsanleitung

Wisi

Wisi MINI OM 10 Bedienungsanleitung

RCA

RCA CRF910 Bedienungsanleitung

Pico Macom

Pico Macom PM45 Bedienungsanleitung

FTE Maximal

FTE Maximal MODIG AIR Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-IP-32RF Bedienungsanleitung

Delphi

Delphi SA10003 Bedienungsanleitung

Elan

Elan MOD3000 Bedienungsanleitung

Televes

Televes T.0X COFDM-QAM CI Bedienungsanleitung

Crucial Audio

Crucial Audio Die Gotterdämmerung Bedienungsanleitung

Pioneer

Pioneer CD-V61FM Bedienungsanleitung

Televes

Televes 554912 Bedienungsanleitung

Newtec

Newtec M6100 Bedienungsanleitung

ProTelevision

ProTelevision PT 5780 Bedienungsanleitung

Argent Cables

Argent Cables HD DVB-T MODULATOR Bedienungsanleitung

SSS Siedle

SSS Siedle BVM 650-0 Bedienungsanleitung

Multiplex

Multiplex CHANNEL PLUS 5615 Bedienungsanleitung