ClearView WiFi-2MP-BL100 Installationsanleitung

WiFi-2MP-BL100 FAQ Manual

Version 1.0.0

Preface

Purpose

In order to deal with and solve the bug during daily use for the users quickly and improve response

speed, the WIFI-2MP-BL100 product team specially made this FAQ manual to provide users with

correct solutions in time.

Attention

The manual doesn’t cover all the WIFI-2MP-BL100 bugs. You are welcome to contact us if there are

any unknown problems and we can add them into the manual to perfect it with better service for our

customers. Besides, you can contact your local retailer or after-sale engineer directly if you need more

help.

This manual is for reference only.

Table of Contents

1Network Problem........................................................................................................................1

1.1 My WIFI-2MP-BL100 is off line from time to time. ..................................................1

1.2 What if network upgrade failed? ................................................................................1

1.3 I can use “Ping” to test that the WIFI-2MP-BL100 is on line after upgrade, but

fail to log in. ................................................................................................................................1

1.4 There is no code stream when I log in and the network program restarts

constantly after upgrade...........................................................................................................1

1.5 It displays “Resources are limited, failed to open video” after I log in the WIFI-

2MP-BL100................................................................................................................................2

1.6 The video window of control installation displays “ ” when I log in the

WIFI-2MP-BL100.......................................................................................................................2

2Image problem............................................................................................................................3

2.1 IR effect is bad..............................................................................................................3

2.2 The device failed to record or snapshot. ..................................................................3

2.3 Black edge appears in the image after upgrade. ....................................................3

2.4 Cross stripe or diagonal stripe appears in the image of WIFI-2MP-BL100........3

2.5 The WIFI-2MP-BL100 image is unsteady. ...............................................................4

2.6 Gray screen appears in the WIFI-2MP-BL100........................................................4

2.7 When IR light is on for the HD or SD IR dome, the image is abnormal, such as

reflective image or white and unclear image. .......................................................................4

iii

3Other problems ...........................................................................................................................6

3.1 I forgot the Device IP. ..................................................................................................6

3.2 I failed to log in WEB. ..................................................................................................6

3.3 I failed to play the downloaded audio and video files.............................................6

3.4 Day/night config switch is invalid. ..............................................................................6

3.5 Device is leaking water................................................................................................7

3.6 WIFI-2MP-BL100 failed to recognize SD card. .......................................................7

3.7 Config info is mismatched with real situation after WIFI-2MP-BL100 working for

a while. ........................................................................................................................................7

3.8 Power adapter is unsteady. ........................................................................................7

3.9 SD card failed to store video. .....................................................................................7

3.10 I failed to save configuration.......................................................................................8

1Network Problem

1.1 My WIFI-2MP-BL100 is off line from time to time.

Solution 1: Check if the network environment is good and the network cable hole plug of WIFI-2MP-

BL100 end is loose.

Solution 2: Check if there is IP conflict.

Solution 3: Check if the device is under normal power supply.

Solution 4: Check if the device upgraded to a wrong program.

1.2 What if network upgrade failed?

Solution 1: Log in again to check if upgrade is successful, because sometimes the progress bar

doesn’t show feedback in time due to the network environment.

Solution 2: Check if the network environment is normal, and there is disconnection or power failure

during upgrade.

Solution 3: Check if the program and the device are matched.

Solution 4: Re-upgrade through 3800 port of config tool (3800 needs to upgrade matched program).

1.3 I can use “Ping” to test that the WIFI-2MP-BL100 is on line after

upgrade, but fail to log in.

Possible reason: Check if the WEB port was modified.

Solution 1: Reset the device and log in again.

Solution 2: Re-upgrade through 3800 port of config tool (3800 needs to upgrade matched program).

1.4 There is no code stream when I log in and the network program restarts

constantly after upgrade.

Solution 1: Check if there is IP conflict or network disconnection.

Solution 2: Check if the device is under normal power supply.

Solution 3: Check if each connection line is loose inside the device after disassembling the camera.

Solution 4: Check if the application program of WIFI-2MP-BL100 is corresponding to the model, and

check if N/P format program is correct.

Solution 5: Check if the control and WEB are correct, there is control running permission under WIN7,

you can delete the control under C:\Program Files\webrec and eliminate IE buffer memory

to reload control and WEB. Please run IE as administrator for WIN 7, you need to install

QuickTime plug-in if it is non-IE browser.

1.5 It displays “Resources are limited, failed to open video” after I log in the

WIFI-2MP-BL100.

Solution 1: Network bandwidth is not enough; change a switcher with bigger bandwidth.

Solution 2: Too many users logging in, and it is beyond the device code stream output capacity.

Solution 3: Disconnect the network or restart the device repeatedly, see 1.1 for more details.

1.6 The video window of control installation displays “ ” when I log in

the WIFI-2MP-BL100.

Solution 1: IE permission setting is not correct, add WIFI-2MP-BL100 IP as trusted sites.

Solution 2: Set IE “Internet Option > Security > Custom Level > Active X control and plug-in” all

enabled.

Solution 3: You need to log in WIFI-2MP-BL100 as an administrator in WIN 7 system for the first time.

2Image problem

2.1 IR effect is bad.

Possible reason 1: Users didn’t use specified power supply, and failed to enable all the IR lights.

Possible reason 2: The object is so far that it is out of the range of IR light.

Possible reason 3: IR-CUT is set as color mode, which caused the front-end sensor to fail to sense IR

light.

Possible reason 4: When you use the device on the table (especially rough surface), the IR light will

shoot back to the lens, which will cause bad IR effect and white picture. At this

moment, you should adjust the elevation angle of the lens or place the device on

the edge.

2.2 The device failed to record or snapshot.

Possible reason: “Snapshot Schedule” is set wrongly; storage path is not correct; “Record Mode” is set

as off.

Solution 1: Set “Record Schedule”, “Snapshot Schedule” in the WEB interface; please refer to the

<WIFI-2MP-BL100 WEB Operation Manual> for more details.

Solution 2: Check if the “Destination” enable in the WEB interface is checked.

Solution 3: Check if the connection of SD and FTP of video and snapshot storage is normal, try to

connect FTP to the computer.

Solution 4: Set “Record Mode” as manual or auto in the WEB interface.

2.3 Black edge appears in the image after upgrade.

Solution 1: Eliminate WIFI-2MP-BL100 configuration or restore factory default after upgrading program.

Solution 2: Upgraded program is not corresponding to the WIFI-2MP-BL100 model, re-upgrade correct

program.

2.4 Cross stripe or diagonal stripe appears in the image of WIFI-2MP-

BL100.

Possible reason 1: Bad connection for the video cable.

Possible reason 2: Strong current interference.

2.5 The WIFI-2MP-BL100 image is unsteady.

Possible reason: Bad connection for the video cable

2.6 Gray screen appears in the WIFI-2MP-BL100.

Phenomenon: gray screen appears in the WIFI-2MP-BL100, it can recover after restart under the state

of power off, gray screen appears repeatedly.

Possible reason: Caused by insufficient power supply.

Solution: Check if the WIFI-2MP-BL100 power supply mode and power adapter are too far away from

the WIFI-2MP-BL100.

2.7 When IR light is on for the HD or SD IR dome, the image is abnormal,

such as reflective image or white and unclear image.

Solution: Use the IR-blocking ring of the lens, or reinstall the light-blocking ring to a proper position.

3Other problems

3.1 I forgot the Device IP.

Solution 1: Find the device IP by quick configuration tool.

Solution 2: If you know the device MAC address, you can set device IP address by modifying

ARP/Ping command. Please refer to <WEB Operation Manual> for more details.

Solution 3: If you are Apple user, you can search the Bonjour server name of WIFI-2MP-BL100 and

3.2 I failed to log in WEB.

Possible reason: User name and password are not correct, network and power adapter problems.

Solution 1: Please enter correct user name and password.

Solution 2: Check if the network cable is normal and useable, and check if the network configuration is

correct or pull out the network cable plug in again.

Solution 3: Please connect default power adapter.

3.3 I failed to play the downloaded audio and video files.

Possible reason: Player problem.

Solution 1: Please download the company default player from the disc.

Solution 2: Install graphics acceleration software whose version is higher than DX8.1

Solution 3: Use MEDIA PLAYER to play the file which is converted to AVI format, install Div

X503Bundle.exe plug-in.

Solution 4: Winxp operating system needs to install plug-in DivX503Bundle.exe and ffdsho-2004

1012.exe.

3.4 Day/night config switch is invalid.

Possible reason: device system time is not corresponding to computer time.

Solution 1: Single click “Camera setting > Camera property > Configuration file management > Switch

according to time” in the WEB interface, set time period according to the computer time.

Solution 2: Synchronize the device time and current PC time.

Inhaltsverzeichnis

Andere ClearView Sicherheitskamera Handbücher

ClearView

ClearView IPD-81A Bedienungsanleitung

ClearView

ClearView MPTZ-2 Bedienungsanleitung

ClearView

ClearView HD4-D200 Bedienungsanleitung

ClearView

ClearView HD4-B100 Bedienungsanleitung

ClearView

ClearView HD2-TD27 Bedienungsanleitung

ClearView

ClearView PTZ Series Bedienungsanleitung

ClearView

ClearView IP-PTZ-IR-988-IR Bedienungsanleitung

ClearView

ClearView IPD-81A Bedienungsanleitung

ClearView

ClearView IPD-93A Bedienungsanleitung

ClearView

ClearView IPPTZ-EL2MPIR250L30X-E Bedienungsanleitung

ClearView

ClearView ip-73 Bedienungsanleitung

ClearView

ClearView IP-007- Installationsanleitung

ClearView

ClearView IP-93A Bedienungsanleitung

ClearView

ClearView CA-0581 BP/N Bedienungsanleitung

ClearView

ClearView A Series Bedienungsanleitung

ClearView

ClearView IP-PT-885 Bedienungsanleitung

ClearView

ClearView K6 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung