Gigabit Fiber Media Converters
4
Technical Specications
Standards IEEE 802.3, 802.3u, 802.3z, 802.3ab
Connectors SFP slot, RJ45 UTP port, DC power plug
UTP port RJ45, Auto MDI/MDI-X, full duplex, 10M, 100M or
1000M modes
SFP slot Supports 100M or 1000M speed SFPs (up to 2.5G
for SSF-SFP-SFP-CON)
Power Adapter Adapter with AC 100-240V input, 0.5A
AC frequency: 50-60Hz, Output DC 5V/1A
Power Requirements DC 5-12V, 4W max. power consumption
Dimensions 90mm x 60mm x 20mm (SFP not included)
Mounting Wall or shelf (optional bracket needed)
Environmental Conditions
Operating Ambient Temperature: 0 to 50°C
Operating Humidity: Maximum 85%, Non-
condensing
Storage Temperature: -30 to 70°C
Storage Humidity: Maximum 95%, Non-condensing
Indoor rated operating device
MTBF 65,000 hours
Warning
1. Use only indoors in climate-controlled environment.
2. Avoid looking directly into bers or lasers while unit is powered.
3. Use only the AC adapter included with the unit (or with the LFC series chassis
available separately)
FCC and CE markings
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
This is a CE class B device, intended to be used in residential, commercial or
industrial applications.
