Clima-Flex CLIC SERIES Bedienungsanleitung

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

CLIC SERIES

INSTALLATION

MANUAL

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

Table of Contents

General Description……………………………………………………………………………………...3

Advantages of the Clima-Flex units……………………………………..……………………4

Installation Diagrams…..………………………………………………...………………….....6

Nomenclature……………………………………………………………………………………………..7

Electrical Diagram……………………………………………….…………………………………….....8

Technical Sheet…………………………………………………..………………………………………10

Dimensions………………………………………………………………………………………………..11

Installation and unit startup……….………………….………………………………………………….12

Installation…………………………………….………………………………………………....13

Pre-startup Checklist………………………………………….………………………………..14

Energy / Power supply inspection….....……………………………….……………………...15

Control panel inspection………………………………………………………………………..16

Initial Startup…………………………………………………………………………….……....16

Compressors…………………………………………………………………………………….………..17

Maintenance……………………………………………………………………………………………....19

Hydraulic Maintenance…..……………………………………………………………………...19

Electrical Maintenance..………………………………………………………………….……..19

Physical Inspection……………………………………………………………………………...19

Hydraulic Connection………………………………………………………………….…………..……...21

Nipple Connection………………………………………………………….……..……………..21

Head Connection…………………………………………………………….…………………..23

Hydraulic Connection Diagram……………………………………………………..…………………...25

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

1. GENERAL DESCRIPTION

GENERAL DESCRIPTION

Clima-Flex chilled water generator units are controlled by

technically specialized software, scroll type compressors,

evaporators, hydronic components (optional) and various

safety protections. The units operate with refrigerant R-410A.

EQUIPMENT

Factory assembled. All piping, wiring and controls needed for

operation are integrated inside the units

MODULE

Hot dipped galvanized base aluminum frame, Pintro sheet

panels insulated with anticorrosive film, panels for easy

access for maintenance without compromising the stability of

the unit.

COMPRESORES

Hermetic scroll compressors, modulating and variable speed

(inverter).

CONDENSERS

High efficiency condenser made of Microchannel tube.

Condensers can be ordered with anticorrosive coating.

Water-cooled units use plate type heat exchangers.

EVAPORATORS

The evaporators are compact and use plate heat

exchangers. Both coolant and hydraulic connections are

properly insulated.

FANS

Centrifugal long distance discharge fans or axial low noise

operation.

COMPONENTS

Refrigeration Controls

The units have solenoid valves, expansion valves, dehydrate

filters and service valves.

ELECTRICAL COMPONENTS

All units come with a control panel, which contains all the

safety and protection devices against external and internal

overheating, compressor protection controls, flow and power

failure detection, and freezing protection. The control panel

includes indicator LED lights.

HYDRONIC COMPONENTS (OPTIONAL)

Water circulation pump

The water pump is fully enclosed and has an anti-corrosion

casing.

Water expansion tank

Installed to absorb the thermal expansion of water has a 2-

gallon capacity.

CONTROL

All Clima-Flex units can be connected to the internet. This

allows for remote control and operation of the units, as well

as remote diagnostics and follow-up maintenance (graphs,

trends, cycle times, alarms, diagnostics, etc.), installation is

simple and flexible using on site internet access.

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

1.1. CLIMA-FLEX UNITS ADVANTAGES

Clima-Flex CLIC units leave the factory as a kit ready to be installed outdoors at both the floor or

ceiling level. The use of air-cooled condensers eliminates the cost and the need to install and

maintain a cooling tower.

The CLIC family has a smaller footprint and lower weight than the competition. Installation of the

cold water pipes is also easier. All CLIC units leave the factory with the water quick connect

connections installed and ready to be used. Grooved or threaded water connections are also

available for easy installation. Optionally the units may require a pumping module; this module

reduces installation time and space dedicated to a pump room.

All Clima-Flex CLIC units have been tested on the factory to ensure proper operation.

Clima-Flex CLIC units are designed to require less service calls. The scroll compressors can last

hundreds of thousands of hours of continuous operation in different applications and conditions.

The Adsil special anticorrosive coating ensures longer life and better performance.

The components and control sequences used in our units are designed to keep CLIC Clima-Flex

units always running, safety and health monitoring systems optimize performance on the go.

The units are designed to meet the AHRI Standard 55/590 and the UL-1995 standard security.

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

EFFICIENCY

CLIMA-FLEX water chillers are designed to comply with all requirements on all commercial

projects. Air cooled CLIC CLIMA-FLEX units may be applied in many ways; the units can be

installed as stand alone or in any number combination to get the exact required capacity for the

project demands. The operation allows modulating in accordance with the building thermal load

variations, and achieving the desired temperature in a precise and fast manner with high efficiency

and minimum energy consumption.

CLIC CLIMA-FLEX unit capacity ranges from 25 to 275 Tons of cooling.

OPERATION

CLIV CLIMA-FLEX units have reduced vibration levels making them virtually silent. The overall

design allows for easy, fast, and low price installation.

QUALITY

Each unit is carefully manufactured and individually tested under strict international standards. CLIC

CLIMA-FLEX units have state of the art components that offer a high quality product.

ENVIRONMENTALLY FRIENDLY

CLIMA-FLEX units use R-410A refrigerant to reduce operating costs, and contribute to a significant

reduction of CO2 emissions. We are ecofriendly and strive to make green quality products.

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

1.2. INSTALLATION DIAGRAM

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

2. NOMENCLATURE

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

3. ELECTRICAL DIAGRAMS

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

REV. 2015-SEP-13

Clima-Flex S.A. de C.V.

4. DIMENSIONES

Inhaltsverzeichnis

Beliebte Kühler Handbücher anderer Marken

Aqua Optima

Aqua Optima Corona Bedienungsanleitung

York

York YGWH 115 Leitfaden

Galletti

Galletti PERFORMA MPE Series Bedienungsanleitung

SMC Networks

SMC Networks HRR Series Bedienungsanleitung

Daikin

Daikin EWAQ016CAW Bedienungsanleitung

Trane

Trane CVHE Betriebsanleitung

Moffat

Moffat Friginox TSR-11SC Bedienungsanleitung

Gree

Gree GWH07AGA-K6DNA1C Bedienungsanleitung

Denali

Denali M1 Bedienungsanleitung

MP Systems

MP Systems PURGE Series Bedienungsanleitung

AEC

AEC PCA SERIES Technisches Datenblatt

Carrier

Carrier AquaEdge 19XRV series Betriebsanleitung

Telemark

Telemark TVP-2000 Handbuch

TICA

TICA MINI VRF CHR Series Bedienungsanleitung

Penguin

Penguin COLD THERAPY CHILLER Bedienungsanleitung

MAXA

MAXA A68 Bedienungsanleitung

SABROE

SABROE ChillPAC Bedienungsanleitung

Daikin

Daikin EWWQ-AJYNN Bedienungsanleitung