Clinton Electronics CE-PTZ10X Bedienungsanleitung

High Speed Dome Camera

CE-PTZ10X

User Manual

CLINTON Electronics

6701 Clinton Road

Loves Park, IL 61111

1.800.447.3306 Sales

1.800.549.6396 Support

1.800.633.8712 Fax

www.clintonelectronics.com

v.04.05.10

Keyboard Adaptor

(No: 14375)

RS-232/

GND GND R T

RS-485/

RS232 R

RS232 G

DC12V -

RS485 -

Power

DC12V

RS485 +

DC12V +

RS232 T Keyboard

RJ45

Keyboard Adaptor

(included with CE-PTZKEY)

CE-PTZ10X

CE-PTZKEY

RS485+ (Green Wire)

RS485- (Yellow Wire)

AC24V (Black Wire)

AC24V (Red Wire)

DVR MUX MENU SET/ SHOT/

ALM/ GRP/ OFF/ ON/ AUTOPAN/

System Keyboard

VER34<01>

AUX/ RUN/ HOLD/ PREV/ NEXT/

123

456

789

*0ENTER

MON

CAM

CLR

OPEN/

BACK FAR/

PIC.L

NEAR/

PIC.F

CLOSE/

DEL

TELE/

PgDn

WIDE/

PgUp

POWER

DVR MUX SYS

Rx Tx

IRIS FOCUS ZOOM

RJ45 Cable

Power Supply to Wall Outlet

BNC Connection

to Monitor or DVR

Monitor

DVR

DIGITAL VIDEO RECORDER

BNC to DVR or Monitor

3 2 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents, Installation & Set-up, Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Precautions & Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connection Schematic, RS485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Distribution, Cable Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Basic Operation: Initial Test, OSD Menu, Keyboard Navigation . . . . . . . . . . . . . . . . . . .

Edit Dome Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Initial Info, Display Setup, Motion Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Clearing Functions, Password Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Clock, Communication Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Zoom, Backlight, Shutter, Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scan, Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tour, Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Time Running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Window Blanking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OSD Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

6-7

System

Camera

Function

Window

Blanking

Intro

Appendix

Introduction

Congratulations on the purchase of your new High Speed Dome Camera. This camera

is a full-functional, high-speed pan-tilt-zoom camera in a compact size, enclosed in

a dome housing. It is designed for professional surveillance applications, and can be

integrated into any surveillance system.

Construction:

• Aluminum-Alloy housing and nishing

• High-precision, machined aluminum construction

• Designed for 24-7 operation

• Stepless and smooth PTZ with micro-processor controlled high-precision mechanism

• 360˚ endless pan range with 1˚-160˚ per second

• 90˚ Tilt range with 1˚-90˚ per second and auto ip

• Stabilized image transfer at 1˚/s (max. zoom)

Built-in Camera:

• High-Performance zoom camera with digital signal processing

• High-Resolution with real 540TVL

• High-Sensitivity with SONY Ex-View CCD

• Integrated 10x optical high-speed zoom iris lens

• Auto-Iris function

• Fast auto-focus

• Manually congurable exposure modes

• Privacy masking up to 24 zones

Functions:

• 128 preset points

• 4 preset tour sequences with 32 presets each

• 4 self-learning (pattern) sequences

• 1 scan sequence

• OSD for conguration setup

• RS 485 interface

• Multiple Protocol settings (CLINTON, Pelco-D, Pelco-P)

• Soft-Setup for ID, Baudrate, and Protocol

• Intelligent Thermal-Control with temperature indicator

• Idle-Protection with user denable action

Installation and Set up

Unpacking your camera

Your PTZ camera comes with a power supply, as well as a wall mount and a small screw to

attach the camera to the wall mount (plus one extra screw). Carefully remove the contents

from it’s packing and set on a rm surface. Save the packing in case of future service

requirements or transportation needs.

CE-PTZ10x Camera Wall Mount User Manual

Set Screw

(+1 extra)

PACKAGE CONTENTS

DC 24VAC

Power

Supply

The Transparent cover is sensitive and should be handled with care. Do not touch or rub the

surface in any way with the protective foil. Please use a dry cloth to clean the inner and outer

surfaces. For contamination, use a natural detergent. Improper cleaning method will cause permanent

scratches on the cover and cause unclear image or focusing errors of the camera.

3”

4”

Bolt

Ceiling/Wall

Indoor mount bracket

Insert PTZ tabs into mount

holes and turn to lock in place

Install the wall mount bracket

Set screw

Insert PTZ tabs into mount

holes and turn to lock in place

Indoor Mounting

9.8”

7”

Dimensions

3”

4”

Bolt

Ceiling/Wall

Indoor mount bracket

Insert PTZ tabs into mount

holes and turn to lock in place

Install the wall mount bracket

Set screw

Insert PTZ tabs into mount

holes and turn to lock in place

Indoor Mounting

9.8”

7”

Installation

Precautions

For all service or installation needs, please refer to qualied service personnel or system installers

Do not attempt to disassemble the device

To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.

Contact qualied service personnel for maintenance

Handle the device with care

Do not strike or shake, as this may damage the device. It should be protected against extreme pressure,

vibration, and humidity during transportation and storage. Damages caused by improper transportation

may void the warranty.

Do not use strong or abrasive detergents when cleaning the device’s body and transparent cover.

Use a dry cloth to clean the device when dirty. When dirt is hard to remove, use a mild detergent and

wipe gently.

Do not operate the device beyond its specied temperature or humidity ratings.

Do not use the dome camera in an extreme environment where high temperature or high humidity

exists.

Do not point the camera lens directly into sunlight or any strong light source.

This will cause permanent damage to the camera and voids the warranty.

Read this user manual carefully before operating the device

Make sure local electric safety standards are followed when using or installing the appliance.

Do not install the camera in an orientation other than as designed

And do not bend or squeeze the device as this may damage the mechanical structure of the device and

void the warranty.

Do not touch the cover with bare hands or any object

Doing so may scratch the surface and aect the image quality.

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, SO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS

OR OTHER OPENINGS ON THE EQUIPMENT.

FCC COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH

THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.

THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF

NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT

IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE

USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS AUTHORITY TO OPERATE THE

EQUIPMENT.

CE COMPLIANCE STATEMENT

WARNING: THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT, THIS PRODUCT

MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE

ADEQUATE MEASURES.

CAUTION: BEFORE ATTEMPTING TO CONNECT OR OPERATE THIS PRODUCT, PLEASE READ THE

LABEL ON THE BOTTOM AND USER’S MANUAL CAREFULLY.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present

within this unit.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

Technical specications are subject to change without prior notice. Manual may contain

mistakes or print errors. All trademarks mentioned belong to their respective owners.

Installation

Safety Instructions before starting

- Do not install and operate this appliance in a ammable and explosive environment.

- Make sure that the installation is done according to the local electricity safety regulations of

your country.

- Before installation and maintenance, make sure that the appliance is disconnected from the

power source.

- Handle the device during installation carefully. Falls or extreme vibration may cause

irreparable damages or void the warranty.

- Do not install or operate the device near any high-voltage devices or high-voltage cable.

The safety distance should remain at least 50m.

- To achieve best image quality, its recommended to use underground cable shielded with

steel tube. Do not install the cable without any protection.

- In a thunderstorm area or region with high inductive voltage, such as high voltage

transformer stations, it is necessary to use additional lightning-proof equipment or

lightning rod for protection.

- For outdoor installation, lightning-proof and grounding of the device should be considered.

Please refer to the industrial safety regulations of your country.

- Grounding should be considered to eliminate any interference and fulll the safety

requirements. Do not connect the ground with short-circuited or other high voltage electric

networks.

- The resistance of down conductor should not exceed 4 Ohms, and its thickness should be

at least 25mm2.

- This appliance has the lightning-proof function which can prevent damages caused by

high-voltage pulse, such as lightning strike below 1500.

- This device meets the Ip66 standards against dust and water. Make sure that the installation

is protected from prolonged water droplet/spatter exposure, which can damage the device.

- Make sure that the installation environment meets the requirements of the device, such as

weight support, sucient room for cords, and power supply requirements.

Keyboard Adaptor

(No: 14375)

RS-232/

GND GND R T

RS-485/

RS232 R

RS232 G

DC12V -

RS485 -

Power

DC12V

RS485 +

DC12V +

RS232 T Keyboard

RJ45

Keyboard Adaptor

(included with CE-PTZKEY)

CE-PTZ10X

CE-PTZKEY

RS485+ (Green Wire)

RS485- (Yellow Wire)

AC24V (Black Wire)

AC24V (Red Wire)

DVR MUX MENU SET/ SHOT/

ALM/ GRP/ OFF/ ON/ AUTOPAN/

System Keyboard

VER34<01>

AUX/ RUN/ HOLD/ PREV/ NEXT/

123

456

789

*0ENTER

MON

CAM

CLR

OPEN/

BACK FAR/

PIC.L

NEAR/

PIC.F

CLOSE/

DEL

TELE/

PgDn

WIDE/

PgUp

POWER

DVR MUX SYS

Rx Tx

IRIS FOCUS ZOOM

RJ45 Cable

Power Supply to Wall Outlet

BNC Connection

to Monitor or DVR

Monitor

DVR

BNC to DVR or Monitor

3 2 1

Installation

Connection Schematic

The high speed dome camera series can be connected to various optional accessories through

the standard connector types, which simplify the cable handling and avoids possible errors. All

accessories are tested for maximum compatibility and best performance.

RS485 Cable-

The telemetric control of the device uses RS485 serial communication with half duplex

transmission technology. The transmission distance can vary, depending on cable type,

and baud rate. The following table shows maximum distances based on cable with 0,56mm

(24AWG) twisted pair:

Baud Rate Max. Distance

2400 bps 5577ft / 1700m

4800 bps 3609ft / 1100m

9600 bps 2297ft / 700m

19200 bps 1312ft / 400m

Due to environmental interfaces, such as electromagnetic and induction elds, or number of connected

devices on the RS485 bus, or using thinner than 24AWG cable, the transmission range may be less.

This dome has jumperless design,

meaning protocol, baud-rate,

and ID are to be set in OSD. The protocol

can be automatically recognized by the

system. For the rst start, please ensure

your keyboard parameters match those

shown on the initial screen (ie. protocol,

baud-rate, ID). Doing so will allow you to

enter the OSD for further settings.

Installation

Star-Connection-

The star-form connection is most commonly used. It enables the connection of dierent dome

cameras with longer cable runs. It is recommended to use an RS485 distributor to ensure the

telemetric data transmission.

The advantage of the star-connection is that every channel can work independently and can

take a cable length up to 3,280 feet (1000 meters) (depending on cable quality). In cases where

more dome cameras are installed, the star-connection can be extended with additional RS485

distributors.

Video Cable-

Coaxial cable with 75Ω impedance with copper conductor at center conductor, and shielded

with 95% copper. The following table shows dierent cable type and its maximum length:

If the cable length is more than 1,312ft (400m), it is recommended to use optional accessories,

such as a video amplier or twisted-pair video converter, for boosting the video signal.

Cable Standard Max. Distance (m / ft)

RG 59 / U 750 ft / 229m

RG 6 / U 1000 ft / 305m

RG 11 / U 1500 ft / 457m

RS 485+

RS 485-

120Ω

Resistor

120Ω

Resistor

Device 1 Device 2 Device 3

System Keyboard

VER34<01>

Termination ON

RS 485+

RS 485-

Termination OFF Termination OFF Termination ON

System Keyboard

VER34<01>

RS-485 Distributor

Video Amplier (optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 750m, coaxial cable

Balun Transmitter

(optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 1200m, twisted pair or cat5 cable

Balun Receiver

(optional)

The values are for reference only. Depends on the cable

quality and environmental conditions, the transmission

distance might be less.

RS 485+

RS 485-

120Ω

Resistor

120Ω

Resistor

Device 1 Device 2 Device 3

System Keyboard

VER34<01>

Termination ON

RS 485+

RS 485-

Termination OFF Termination OFF Termination ON

System Keyboard

VER34<01>

RS-485 Distributor

Video Amplier (optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 750m, coaxial cable

Balun Transmitter

(optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 1200m, twisted pair or cat5 cable

Balun Receiver

(optional)

Extend connection distance

with video amplier

Extend connection distance with

Twisted-Pair video converter

RS 485+

RS 485-

120Ω

Resistor

120Ω

Resistor

Device 1 Device 2 Device 3

System Keyboard

VER34<01>

Termination ON

RS 485+

RS 485-

Termination OFF Termination OFF Termination ON

System Keyboard

VER34<01>

RS-485 Distributor

Video Amplier (optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 750m, coaxial cable

Balun Transmitter

(optional)

DVR

Monitor

(optional)

DVR

(optional)

Up to 1200m, twisted pair or cat5 cable

Balun Receiver

(optional)

Inhaltsverzeichnis

Andere Clinton Electronics Sicherheitskamera Handbücher

Clinton Electronics

Clinton Electronics CE-D970 Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-CC115-W Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-PTZ series Bedienungsanleitung

Clinton Electronics

Clinton Electronics VF54IR Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-PTZ10XHD Bedienungsanleitung

Clinton Electronics

Clinton Electronics D953 Bedienungsanleitung

Clinton Electronics

Clinton Electronics VandalX VX70B Bedienungsanleitung

Clinton Electronics

Clinton Electronics VF540 Bedienungsanleitung

Clinton Electronics

Clinton Electronics VX20 Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-505-Z-IR Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-T100HD Bedienungsanleitung

Clinton Electronics

Clinton Electronics Effio-V WDR Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-955-CAM-WD Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-D958 Bedienungsanleitung

Clinton Electronics

Clinton Electronics VF1000IR Bedienungsanleitung

Clinton Electronics

Clinton Electronics Home Guard Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-955-CAM-WD Bedienungsanleitung

Clinton Electronics

Clinton Electronics NX3 Series Bedienungsanleitung

Clinton Electronics

Clinton Electronics CE-VFCD918-WD Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung