Clinton VFCD954 Bedienungsanleitung


Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
The lightning ash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sucient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply
with limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer‑
ence at his own expense.
WARNING - Changes or modications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of re hazards:
u Do NOT use power sources other than that specied.
u Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualied service person and
should conform to all local codes.

Table of Contents
Warning 1
Precautions 2
Components 4
Installation 5
nBracket & Camera Mounting
nPower Connector & Monitor Impedance
nViewing Angle & Focus Adjustment
On Screen Display (OSD) Menu 6
Accessing the OSD Menu Settings 7
Lens• 9
Exposure• 10
‑ Shutter
‑ AGC (Auto Gain Control)
‑ Sens‑Up
‑ Return
Backlight• 12
D‑WDR (Digital WDR)• 15
White Balance 16•
Day / Night• 17
3DNR• 18
Special 19
Camera Title 20•
D‑Eect 22•
Motion Detection 24•
Privacy 25•
Adjust 26
Reset 27
Exit 27
Troubleshooting 28
Specications 29
Dimension (inches) 30
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com

Contact an authorised technician to carry out the inspection.
If the camera emits smoke or is unusually hot for a long period, a re may be
caused.
If the camera is installed on an inappropriate surface, it may fall and cause
injury.
It could cause an electric shock.
It may result in an electric shock or other hazards.
It may result in a re or other hazards.
Warning
The camera requires periodic inspection.
Stop using your camera when you nd it malfunctioning.
Do not install the camera on a surface that can not support it.
Do not hold plug with wet hands.
Do not dis-assemble the camera.
Do not use the camera close to a gas or oil leak.
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
1

Only use the camera under conditions It can cause the image quality to be
where temperatures are between poor.
32°F ~ 113°F. Be especially careful to
provide ventilation when operating
under high temperatures.
Severe lighting change or icker can This is one of the most important
cause the camera to work improperly. parts of the camera. Be careful not to
leave ngerprints on the lens cover.
Do not install the camera in
extreme temperature conditions.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Precautions
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Do not install or use the camera
in an environment where the
humidity is high.
2

It can cause malfunctions to occur. It can damage the CCD.
If it gets wet, wipe it dry immediately. If exposed to radioactivity the CCD
Liquids can contain minerals that will fail.
corrode the electronic components.
Never keep the camera pointed
directly at strong light.
Do not drop the camera or subject
it to physical shocks.
Do not expose the camera to
radioactivity.
Notes
If the camera is exposed to spotlight or object reecting strong light, smear•
or blooming may occur.
Check that the power satises the normal specication before connecting•
the camera.
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Do not expose the camera to rain
or spill beverage on it.
3

Components
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com 4

Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Installation
1. Bracket & Camera Mounting
‑ Use the supplied screws to attach the camera to the mounting surface.
2. Power Connector & Monitor Impedance
‑ Use a DC12V or AC24V (500mA or 1A regulated PSU).
‑ To avoid re or shock hazards, always use a CE marked PSU.
‑ Set the monitor impedance switch to 75Ω. Check the impedance switch if
the screen is blurred.
3. Viewing Angle & Focus Adjustment
‑ To widen the viewing angle, rotate the Zoom Lever to the Left, and to the
right to narrow the viewing angle.
‑ Rotate the Focus Lever Left or Right to focus the Lens.
5

On Screen Display (OSD) Menu
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
On Screen Display (OSD) Menu•
Camera functions and settings can be adjusted or changed by activating the
OSD menu. When the OSD menu is activated text will display on the monitor.
The user can then move the cursor to the desired function to change the setting.
Setup Menu
LENS •DC
SHUTTER •FLK
BRIGHTNESS ‑ ‑ ‑ ‑
AGC •OFF •LOW •MIDDLE •HIGH
SENS-UP •OFF •AUTO(x2~x258)
BLC •OFF •LOW •MIDDLE •HIGH
D-WDR •OFF •INDOOR •OUTDOOR
WHITEBALANCE •ATW •AWB •MANUAL •AWC
DAY/NIGHT •AUTO •B&W •COLOR •EXT
3DNR •ON •OFF
SPECIAL •CAMERATITLE
•D-EFFECT
•MOTION
•PRIVACY
•SYNC
•RETURN
ADJUST •SHARPNESS
•BLUE
•RED
•RETURN
RESET •FACTORY
EXIT •SavetheSETUPMenuandEXIT
6

Settings can be adjusted by using the OSD joystick on the inside of the camera.
2. Press the SET button
The SETUP menu will be displayed on the monitor.•
Sales: 1-800-447-3306 Support: 1-800-549-6393 www.clintonelectronics.com
Accessing the OSD Menu Settings
7
Inhaltsverzeichnis
Andere Clinton Sicherheitskamera Handbücher



















