Clockaudio CUB-33 Bedienungsanleitung
1
Clockaudio Ltd.
Unit C, Wellington Gate, Silverthorne Way,
Waterlooville, Hampshire PO7 7XY, UK
Tel: +44(0)23 9225-1193
Fax: +44(0)23 9225 1201
Email: info@Clockaudio.co.uk
Clockaudio North America Inc.
2891 du Meunier, Unit 103, Vaudreuil-Dorion, QC,
Canada J7V 8P9
Toll Free: 1-888-424-9797
Tel: 450-424-9797
Fax: 450-424-3660
Email: info@clockaudio.com
Clockaudio PTE Ltd.
BizTech Centre, Unit # 01-02, 627A Aljunied Road,
Singapore, 389842
Tel: +65 67484738
Fax: +65 67484428
Email: info@clockaudio.com.sg
CLOCKAUDIO CUB-33
Conference USB Microphone
2
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories as specified by Clockaudio.
• Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the appa-
ratus, if the apparatus has been exposed to rain or moisture, does not operate
normally or has been dropped.
3
At the end of the life of this equipment,
dispose of equipment according to
local regulations.
LIMITED ONE YEAR WARRANTY
The equipment is warranted for one year from date of purchase from Clockaudio
against defects in materials or workmanship.
This warranty does not cover equipment which has been abused or damaged
by careless handling or shipping.
This warranty does not apply to used or demonstrator equipment.
Should any defect develop, Clockaudio will, at our option, repair or replace any
defective parts without charge for either parts or labor. If Clockaudio cannot
correct the defect in the equipment, it will be replaced at no charge with a new
item. Clockaudio will pay for the cost of returning the replacement equipment to
you.
This warranty applies only to items returned to Clockaudio, shipping costs
prepaid, within one year from the date of purchase.
4
CONTENTS
GETTING STARTED 5
DIAGRAM OF FUNCTIONS 6
SETTING UP THE CUB-33 7
CONNECTING TO PC/MAC VIA USB 9
USING THE CUB-33 11
MICROPHONE PLACEMENT 12
APPLICATION EXAMPLES 13
SPECIFICATIONS 14
5
GETTING STARTED
The Clockaudio CUB-33 is a desktop microphone, preamp, and USB device
all in one convenient package. Featuring the popular C3 capsule and our
rugged C33/SR gooseneck, the CUB-33 provides high intelligibility audio for
your video conferencing needs.
The configurable Touch LCD screen on the front of the CUB-33 allow quick
access to MUTE functions, color coded so you always know if you are
muted or live. Additionally, a built in VU meter shows the input level of your
microphone, assuring you that your levels are perfect for video streaming.
FEATURE OVERVIEW
• High quality Clockaudio C3 cardioid microphone
• 24-bit/48Khz high quality digital conversion
• Plug and Play with PC and Mac
• USB bus power
• Touch LCD screen
• Compact design with positionable gooseneck
IN THE BOX
• CUB-33 Base Unit
• 6’ USB cable
• Quick Start Card
6
DIAGRAM OF FUNCTIONS
1. Rotary Knob/Setup Button
2. USB Port
USB streaming port (Type B) for connection to Windows or Mac PC
(Type A). Also powers the CUB-33.
3. K-LOCK Slot
4. C33/SR Gooseneck with C3 microphone capsule
5. Touch LCD Screen
1 2 3
4
5
7
SETTING UP THE CUB-33
Setting up the CUB-33 is incredibly easy.
1. Connect the CUB-33 to a Windows PC or Mac computer
2. Configure the CUB-33 with the Rotary Knob on the back
3. Setup the CUB-33 on the computer (if necessary)
CONFIGURING THE CUB-33
Press the Rotary Knob on the back of the CUB-33 until the setup menu
appears (approximately1.5 seconds). Turn the Rotary Knob to access each
menu feature. PRESS the Rotary Knob to edit the selected
item.
MICROPHONE GAIN
Set the gain of the microphone with this control. The
default is 47dB. Turn the Rotary Knob to adjust the
settings.
SCREEN BRIGHTNESS
Set the brightness of the touch LCD screen. Turn the
Rotary Knob to select Low, Medium, or High brightness.
UNMUTE BUTTON COLOR
Select the color the touch LCD screen will display when
the microphone is in normal, unmuted operation. Turn
the Rotary Knob to select Blue, Red, or Green.
8
MUTE BUTTON COLOR
Select the color the touch LCD screen will display when
the microphone is muted. Turn the Rotary Knob to select
Blue, Red, or Green.
BUTTON TYPE
The CUB-33 has a built in VU meter
for monitoring input levels. This meter
can be displayed on the Touch LCD
screen button. Turn the Rotary Knob
to select VU ON or VU OFF.
BUTTON BEHAVIOR
This function determines how the LCD touch screen
“button” will function. Turn the Rotary Knob to select
LATCH or PTM mode.
• LATCH – In Latch mode, press the button to turn on
the MUTE and press again to turn off MUTE.
• PTM – In PTM (Press to Mute) mode, the CUB-33 will
only mute WHILE the button is being pressed.
FIRMWARE VERSION
Displays the current firmware version.
EXIT MENU
To exit the setup menu, navigate to this screen and
PRESS the Rotary Knob.
9
CONNECTING TO PC/MAC VIA USB
The CUB-33 is a plug and play USB interface. When connected to a
Windows PC or Mac computer, the CUB-33 will show up as CUI-2 USB
Mic Preamp, a single channel input device.
Launch Windows Sound panel (on a Windows PC) or Sound from System
Preferences (on a Mac computer) to verify the CUB-33 has installed
properly.
To adjust the gain of the microphone, use the gain Microphone Gain setting
on the CUB-33 as described in the configuration setup section.
Windows
Mac OS
10
USE THE VU MODE TO SET GAIN
With the Button Mode set to VU ON, the LEDs will
appear green when a signal is present, yellow when
a signal is near clipping, and red when the signal is
clipping.
In VU mode, speak into the microphone(s) at a slightly
elevated speech level. Set the microphone preamp gain so the signal is
mostly green with infrequent peaks into yellow during louder speech testing.
You do not want to see any Red.
Once the gain is set properly, exit the setup menu.
VERIFY STREAMING AND GAIN LEVELS VIA USB
After you have adjusted the gain on the CUB-33, verify that it is passing the
signal to a Windows or Mac PC. Connect the CUB-33 to a Windows or Mac
PC.
Launch Windows Sound panel (on a Windows PC) or Sound from System
Preferences (on a Mac computer). Verify that the input level is satisfactory.
Inhaltsverzeichnis
Andere Clockaudio Mikrofon Handbücher
Clockaudio
Clockaudio CCRM 4000-Retracta Leitfaden
Clockaudio
Clockaudio TIM-1000 Bedienungsanleitung
Clockaudio
Clockaudio CCRM4000-C303 Leitfaden
Clockaudio
Clockaudio SM 80-RF Bedienungsanleitung
Clockaudio
Clockaudio ARM 102-C MK2 Bedienungsanleitung
Clockaudio
Clockaudio CRM 203 RF Bedienungsanleitung
Clockaudio
Clockaudio CCRM 4000 Bedienungsanleitung
Clockaudio
Clockaudio CRM 202-RF Bedienungsanleitung
Clockaudio
Clockaudio C 303-RF Bedienungsanleitung
Beliebte Mikrofon Handbücher anderer Marken
IK Multimedia
IK Multimedia iRig Stream MIC PRO Bedienungsanleitung
DAPAudio
DAPAudio RM-101 Bedienungsanleitung
AKG
AKG CHM 21 Bedienungsanleitung
Sennheiser
Sennheiser evolution wireless series EM 100 Bedienungsanleitung
Sony
Sony C-48 Bedienungsanleitung
GIGAMEDIA
GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung
