CNET CIC-920W Handbuch
CIC-920W Basic Setup
January 2008
How to
• Access the camera on the network
• Set wireless settings
• Store/record images
Basic Setup
• Connect the power
• Use an Ethernet cable to connect the
camera to your network
• Install the search tool software from the
CD to a computer on the network
• Install Search Tool from CD
• Run the CIC-920W program by going to
start>>programs>>CIC-920W
• Double click the found camera to bring up
the camera interface.
How to setup wireless
• Click on basic settings icon
• Click on Network
• Click on Wireless tab
• Enter the SSID of your wireless router/AP
• Match the Auth/encryption settings used
by your wireless router
wireless
Where to store images
• CIC-920W can be configured to capture
snapshots or record video to any location
on the network
• This can be done in the Video settings
page
• Just enter the location for storing
snapshots and recordings. This location
could be the CNet NAS CLD-221P that
can be accessed from anywhere.
!
Video settings
Inhaltsverzeichnis
Andere CNET IP-Kamera Handbücher
