CNET CWR-854 Bedienungsanleitung
1
Wireless-G Router
User’s Guide
2
Table of Contents
Chapter 1: Introduction
Installing Your Router
System Requirements
Installation Instructions
Chapter 2: Preparing Your Network
Preparing Your Network
Configuring Windows for IP Networking
Collect ISP Information
Chapter 3: Configuring the Router’s Basic Functions
Basic Functions
Setup
Global Address
Wireless
Tools
Status
DHCP
Log
Statistic
Chapter 4: Configuring the Router’s Advanced Functions
Advanced Functions
Virtual Server
Filters
IP/URL Block
Special Apps
DMZ Host
MAC Clone
Dynamic DNS
Proxy DNS
3
Chapter 1: Introduction
˙Installing Your Router
In this chapter, you’ll learn how to connect your router.
˙System Requirements
˙One or more PCs (desktop or notebook) with Ethernet interface
˙Broadband Internet access
˙Ethernet cables
˙Wireless interface (if planning to use wireless functions)
˙Installation Instructions
Connecting the Router:
1. Make sure all systems are turned off, including the router, PC(s), and the cable or
DSL modem (if applicable).
2. Connect the WAN port on the router to your cable/DSL modem, Ethernet Server, or
hub.
3. Connect one or more client PCs to the LAN port(s).
4. Connect the power adapter (5VDC, 2A) to the power jack on the router. Then, plug
the power cable into an outlet.
5. Turn on your PC(s).
4
Chapter 2: Preparing Your Network
˙Preparing Your Network
In this chapter, you’ll learn what to do before configuring your router.
Before you can configure your router, you need to set up all the computers on your network for
TCP/IP networking. You also need to know certain information from your ISP.
˙Configuring Windows for IP Networking
You need to configure each computer in your network for TCP/IP networking. If you plan to use
the DHCP feature (recommended), you should configure each computer to receive an IP
address automatically. See the procedure below for instructions.
If you don’t plan to use DHCP, you’ll need to manually assign an IP address to each computer.
Refer to your Windows documentation for instructions on how to do this.
To configure Windows to receive dynamic IP address:
1. Click the Start button. Select Settings and click the Control Panel icon. Double-click the
Network icon.
2. On the Configuration tab, select the TCP/IP line for the applicable Ethernet adapter. Do not
choose a TCP/IP entry whose name mentions DUN, PPPoE, VPN, or AOL. If the word TCP/IP
appears by itself, select that line. Click the Properties button.
5
3. Click the IP Address tab. Select Obtain an IP address automatically
4. Now click the Gateway tab, and verify that the Installed Gateway field is
blank. Click the OK button.
5. Click the OK button again. Windows may ask you for the original Windows installation disk or
additional files. Check for the files at c:\windows\options\cabs, or insert your Windows CD-ROM
into your CDROM drive and check the correct file location, e.g., D:\win98, D:\win9x, etc. (if “D” is
the letter of your CD-ROM drive).
6. Windows may ask you to restart your PC. Click the Yes button. If Windows does not ask you to
restart, restart your computer anyway.
6
1. Click the Start button. Select Settings and click the Control Panel icon. Double-click the
Network and Dial-up Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first
Local Area Connection listed). Double-click the Local Area Connection. Click the Properties
button
7
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Protocol (TCP/IP),
and click the Properties button.
4. Select Obtain an IP address automatically. Once the new window appears, click the OK button.
Click the OK button again to complete the PC configuration.
8
5. Restart your computer.
9
The following instructions assume you are running Windows XP with the default interface. If you
are using the Classic interface (where the icons and menus look like previous Windows versions),
please follow the instructions for Windows 2000.
1. Click the Start button and then the Control Panel icon. Click the Network and Internet
Connections icon. Then click the Network Connections icon.
2. Select the Local Area Connection icon for the applicable Ethernet adapter (usually it is the first
Local Area Connection listed). Double-click the Local Area Connection. Click the Properties
button.
10
3. Make sure the box next to Internet Protocol (TCP/IP) is checked. Highlight Internet Protocol (TCP/IP),
and click the Properties button.
4. Select Obtain an IP address automatically. Once the new window appears, click the OK button. Click
the OK button again to complete the PC configuration.
Andere Handbücher für CWR-854
6
Inhaltsverzeichnis
Andere CNET Netzwerk-Router Handbücher
CNET
CNET CNIG-914 Handbuch
CNET
CNET CNIG904S Bedienungsanleitung
CNET
CNET CBR-980 Bedienungsanleitung
CNET
CNET CWR-935M Bedienungsanleitung
CNET
CNET CWR-935M Bedienungsanleitung
CNET
CNET WNOR5305 Bedienungsanleitung
CNET
CNET CWR-854 Bedienungsanleitung
CNET
CNET CNIG-914 Bedienungsanleitung
CNET
CNET CMR-986 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise