10 11
1300 663 907 1300 663 907
Model Number BT42740 Model Number BT42740
After Sales Support After Sales Support
4. Activate Bluetooth® on your mobile phone and search for the
device. Refer to your phone’s instructions if you are unclear on how
to search for Bluetooth® devices.
5. Choose the Bluetooth® device named FDC-01VB and choose to pair
this device. If you are asked for a password, enter 0000.
6. The red and blue LEDs will then change to display blue only and the
headset will beep once to conrm pairing was successful.
6.2 Managing Phone Calls
To Answer an Incoming Mobile Phone Call
1. Press the multi-function button on the receiver while the phone is
ringing.
2. Use the jog wheel to increase or decrease the headset volume.
Tip: The incoming call will answer automatically once the phone has
rung for 8 seconds.
Ending a Mobile Phone Call
1. Press the multi-function button to end the call.
Rejecting a Mobile Phone Call
1. When you hear the phone ringing, immediately press and hold the
multi-function button on the headset until you hear a beep.
Redial the Last Number
1. Press and hold the multi-function button for 2 seconds or until it
beeps, it will then dial your last number called.
7. OPERATION VIA INTERCOM
7.1 Pairing One Motorcycle Bluetooth® to Another
Motorcycle Bluetooth® to Use as an Intercom
1. Place both receivers near each other (within 1m).
2. Make sure both receivers are turned OFF.
3. Press and hold down the power/intercom button on both units at
the same time for approximately 8 seconds, until the receivers beep
twice. The red and blue lights will ash alternately.
4. Quickly press the power/intercom button on one of the receivers
(We will call this receiver ‘A’). This will now search for the other
receiver (i.e. receiver ‘B’) so they can be paired.
5. When they have successfully paired, the red and blue lights will then
change to blue only (ashing) and the receiver will beep once.
To Start a Conversation via Intercom
1. Once the two headsets are paired with each other, press the
power/ intercom button on either receiver to begin.
2. Use the jog wheel to increase or decrease the headset volume.
Tip: You only need to press the power/intercom button once to
establish a connection; conversation between the two paired
headsets can now be carried out handsfree.
To End a Conversation via Intercom
1. Press the power/intercom button on either of the receivers.
Tip: If the intercom headset is also paired with a mobile phone, the
intercom conversation will be automatically disconnected to answer
the phone when there is an incoming call. The intercom function
will resume once the call has ended.
