Code Alarm Professional ca5054 Bedienungsanleitung

PROFESSIONAL

SERIES

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

Remote Start and Keyless

Entry System

CA 5054

Owner’s Guide

2ca5054 Owners rev A

Table of Contents

Using Your Remote Control.................................................................... 3

Using the Keyless Entry .................................................................... 3

Two Stage Door Unlock (optional)..................................................... 3

Activating Trunk Release (optional)................................................... 3

Using the Progressive Car Finder Feature........................................ 3

Using the Personal Protection Alarm................................................. 3

Programmed Transmitter Notication................................................ 3

Valet Mode ........................................................................................ 4

Eliminating Lock / Unlock Notication Chirps .................................... 4

Using Your Remote Vehicle Starter ....................................................... 4

Remote Starting Your Vehicle............................................................ 4

Remote Start Shutdown .................................................................... 4

Entering Your Vehicle while it is Running via Remote Start .............. 4

Preheating or Precooling the Vehicle’s Interior ................................. 5

User Programmable Run Time / Run Time Extension....................... 5

Using the “Quick-Stop” Feature......................................................... 5

Operating the 2 / 3 Hour Start Up Timer Mode.................................. 5

Operating the Daily Start Timer ......................................................... 6

Remote Start Safety Features........................................................... 6

Transmitter Button Functions ................................................................ 7

Replacing Remote Control Batteries..................................................... 7

Warranty Information .............................................................................. 8

Using Your Remote Control

Using the Keyless Entry

The button is used to lock the vehicle’s doors, the button is used to unlock the

vehicle’s doors. To lock or unlock the doors simply press and release the desired

function button one time. For your convenience, the parking lights will ash once when

the doors are unlocked and twice when the door are locked.

NOTE: The system is defaulted with Silent Choice enabled, which requires a second

press of the or button to activate an audible locking/unlocking response from

the vehicle. If your system is set up for 2 step unlock, a third press of unlock will

activate the audible response.

Using the Progressive Car Finder Feature

Press the button to locate your vehicle. The system will ash the parking lights

and sound 5 times at low volume, increasing in volume each time the button is

pressed.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 3 seconds to activate the personal protection alarm.

During panic mode, the normal function of the transmitter buttons will be suspended.

The transmitter’s and buttons can be used to lock and unlock the door (if the

option is installed). To stop the alarm, press and hold the button on the transmitter

again for 3 seconds. The system will automatically stop after 30 seconds.

Programmed Transmitter Notication

As a security precaution each time the vehicle’s ignition is turn on the status LED

light with ash the number of transmitters programmed into the system. This helps

to identify unauthorized transmitters from accessing your vehicle. If you believe an

unauthorized transmitter has been programmed to your system, contact your installing

dealer for assistance.

Activating the Trunk Release Feature (Optional)

The button is used to open the trunk of the vehicle. To open the vehicle’s trunk

press and hold the button for 3 seconds.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will unlock

only the driver’s door. Press again within three seconds to unlock the remaining

doors.

4ca5054 Owners rev A

Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the button 2 times

within 2 seconds. The system will sound, the parking lights will ash 1 time and the

system will check the vehicle to ensure it is safe to start. If all safety parameters are

correct, the vehicle will start within 5 seconds. The vehicle’s parking lights will turn on

(or ash depending on system settings) as a visual indication that the vehicle has

started and is running.

If your vehicle stalls or does not start, the system will pause 5 seconds, then try

2 more times to start the vehicle (a total of 3 attempts). The system will pause

5 seconds between each start attempt. If the vehicle does not start after the 3rd

attempt, the system will abort the remote vehicle start process.

Remote Start Shutdown

Press and hold the button for 3 seconds to turn the vehicle off.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN

position.

4. Press the brake pedal. The remote vehicle starter will disengage and

the vehicle will operate normally.

Eliminating Lock / Unlock Notication Chirps

System lock and unlock notication chirps can be toggled ON or OFF without

entering the programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

Using Your Remote Vehicle Starter

Valet Mode

Valet Mode is used to disable the system from remote starting. To

enter or exit valet mode simply follow the 4 steps outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and

operation. After the system starts the vehicle, the heater or air conditioner will activate

and heat or cool the vehicle’s interior to your setting.

User Programmable Run Time / Run Time Extension

The system has the ability to allow the user to extend the time the vehicle will be

running under control of the remote start. This will only extend the run time back to the

current run time setting during the current remote start cycle. If your system is set to

run 15 minutes and the time remaining is 4 minutes, extending the run time will reset

the countdown timer to 15 minutes and your vehicle will continue to run for another 15

minutes. Follow the steps below to extend the vehicle’s run time.

1. The remote start must already be active.

2. Press and release the button 4 times.

3. The system will chirp 1 time and ash the parking lights 4 times to

conrm that the run time has been reset.

Operating the 2 / 3 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.

This feature is especially useful in cold climates where the only means to keep the

engine and engine uids warm is to periodically start the engine. The default setting is

3 hour, selection between 2 or 3 hour is made in option programming.

WARNING!

Be certain that the vehicle is outdoors before using this or any remote starting

device. A running engine produces dangerous carbon monoxide fumes which can be

harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is

garaged.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage quick stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the button 2

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.

6ca5054 Owners rev A

Remote Start Safety Features

For safety and security reasons, the system will shutdown or prevent the remote

vehicle starter from activating if any of the following occur:

1. The vehicle hood is open.

2. The brake pedal is pressed prior to turning the ignition key to the ON

position.

3. The engine is over-revved (tach checking only).

4. Valet mode is active.

Operating the Daily Start Timer

The system has the ability to start your vehicle based on a 24-hour countdown timer.

This feature requires a two-part activation sequence. From the remote, while ine range

of the vehicle, pressing both the & buttons together will activate the 24 hour

countdown timer (the vehicle will start 24 hours from this time). Next, When you are

nished operating the vehicle for the day, perform the following steps to complete the

process.

1. Turn the ignition ON/OFF (vehicle must be disarmed).

2. Within 10 seconds, while pressing the brake, press and release the

button twice.

3. The vehicle will emit 2 chirps and ash the parking lights 4 times.

To begin the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s ignition ON then OFF.

2. Press and hold the valet button.

3. Press the button 4 times, the system will;

a. When set for 3 Hour (default) - chirp 2 times and ash the

parking lights 4 times.

b. When set for 2 Hour - chirp 1 time and ash the parking

lights 2 times.

4. Release the valet button.

To exit the 2 / 3 hour start up timer mode:

1. Turn the vehicle’s Ignition ON.

1. Activate the remote vehicle start feature using the remote

control.

Transmitter Button Functions

1 Way

Transmitter

Lock Unlock

Car Find /

Panic

Start Operation Method

Lock X Press and Release

Unlock XPress and Release

Trunk XPush and Hold (3 Sec)

Car FinderX

Press and Release

PanicX

Push and Hold (3 Sec)

Remote Start X

Press and Release (1 or 2 times

depending on selectable option)

Remote Start

Shut Down

XPush and Hold (3 Sec)

Run Time

Extention

XPress and Release 4 times.

2 / 3 Hour Start X

Ignition ON/OFF, Press and Hold

Valet Button, Press Start 4 times

Daily Start Timer XX

Press Lock + Start

Replacing Remote Control Batteries

1-Way Remote Control (part # CATX4)

The batteries (model CR2016) inside each remote control should last approximately 1

year under normal use. When the batteries become weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the remote control

batteries:

1. Unsnap and disassemble the halves of the remote control.

2. Remove the old batteries, observing the +/- symbols on the batteries

and replace with new CR2016 batteries.

3. Reassemble the halves of the remote control.

4. Test operation of the remote control.

8ca5054 Owners rev A

LIMITED LIFETIME WARRANTY

Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays.

Voxx Electronics Corporation (the Company) warrants to the original purchaser of this

product that should this product or any part thereof, (other than transmitters) under nor-

mal use and conditions, be proven defective in material or workmanship during the life-

time of the vehicle, in which it was originally installed from the date of original purchase

such defect(s) will be repaired or replaced with new or reconditioned product, (at the

Company’s option) without charge for parts or repair labor. A transmitter is warranted for

12 months from the date of original purchase.

To obtain repair or replacement within the terms of this Warranty, the product is to

be delivered with proof of warranty coverage (e.g. dated bill of sale), specication of

defect(s), transportation prepaid, to an approved warranty station. This Warranty is not

transferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs

incurred for removal or reinstallation of the product. This Warranty does not cover bat-

teries, broken LCD or OLED display screens, nor apply to any product or part thereof

which, in the opinion of the Company, has suffered or been damaged through alteration,

improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or

defacement of the factory serial number/bar code label(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL

BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or rep-

resentative is authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.

The company does not warrant that this product cannot be compromised or circum-

vented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID

BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above limitations or

exclusions may not apply to you. This Warranty gives you specic legal rights and you

may also have other rights which vary from state to state.

Voxx Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994

128-9445

10 ca5054 Owners rev A

Voxx Electronics Corporation.

Customer Service 1-800-421-3209

WWW.CODE-ALARM.COM

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of

Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that

may cause undesired operation.

Warning!

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

PATENTED: www.voxxintl.com/company/patents

Andere Handbücher für Professional ca5054

Inhaltsverzeichnis

Andere Code Alarm Fernstartsystem Handbücher

Code Alarm

Code Alarm CA 5051 Bedienungsanleitung

Code Alarm

Code Alarm CA 5055 Bedienungsanleitung

Code Alarm

Code Alarm F30 Bedienungsanleitung

Code Alarm

Code Alarm ca 2051 Bedienungsanleitung

Code Alarm

Code Alarm Professional Series CA 1050 Bedienungsanleitung

Code Alarm

Code Alarm CA 5053 Bedienungsanleitung

Code Alarm

Code Alarm CA-550 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL CASECRS Bedienungsanleitung

Code Alarm

Code Alarm ca6154 Professional Series Bedienungsanleitung

Code Alarm

Code Alarm CA-630 Bedienungsanleitung

Code Alarm

Code Alarm ca4B5 Bedienungsanleitung

Code Alarm

Code Alarm CA 5051MT Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm CSI-100 Bedienungsanleitung

Code Alarm

Code Alarm ca5553sst Bedienungsanleitung

Code Alarm

Code Alarm Elite ca6555E Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm PC 7500 Bedienungsanleitung

Code Alarm

Code Alarm CA-520 Bedienungsanleitung

Code Alarm

Code Alarm ca6553 Bedienungsanleitung

Code Alarm

Code Alarm CA 4051 Bedienungsanleitung

Code Alarm

Code Alarm CA-630 Bedienungsanleitung

Code Alarm

Code Alarm ca5154 professional Series Bedienungsanleitung

Code Alarm

Code Alarm ca5354 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

Rooboost

Rooboost RB-1750WP Bedienungsanleitung

Schumacher

Schumacher INSTANT POWER IP-75C Bedienungsanleitung

Mazda

Mazda 0000-8F-H28 Bedienungsanleitung