Code CORTEXJPOS CR2300 Kurzanleitung zur Einrichtung

Bluetooth®Connection Instructions

for CR2300/CR2600/CR3600

INTEGRATION GUIDE

VERSION 03

RELEASE DATE: MARCH 2016

Apple is a trademarks of Apple Inc., registered in the U.S. and other countries.

Windows is a registered trademark of Microso Corporaon in the United States and/or other countries.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

D020625_03 Bluetooth Connection Integration Guide

1.0 - Initial Pairing Instructions for Bluetooth® Connection to Smart Phones and Tablets .......................................... 3

2.0 - Keyboard Display options for Apple® iOS......................................................................................................... 3

3.0 - Reconnection to Other Bluetooth® Devices ..................................................................................................... 4

4.0 - Clear Connection History ................................................................................................................................. 4

5.0 - Initial Pairing Instructions for Bluetooth® Connection to Windows® 7............................................................... 5

6.0 - Initial Pairing Instructions for Bluetooth® Connection to Windows® 8............................................................... 6

7.0 - Initial Pairing Instructions for Bluetooth® Connection Windows® 10 ................................................................ 8

8.0 - Initial Pairing Instructions for Bluetooth® Connection to Internal Bluetooth® of a PC as a Virtual COM Port....... 9

9.0 - Pin References Barcodes .............................................................................................................................. 12

Table of Contents

D020625_03 Bluetooth Connection Integration Guide

2.0 - Keyboard Display Options for Apple®iOS*

The CR2300/CR2600/CR3600 barcode readers are compatible with most

Bluetooth keyboard supported smartphone and tablet devices.

1. In your device’s list of applications, select the ‘Settings’ icon.

2. Select the ‘Bluetooth’ setting.

3. Scan the following barcode to enable your reader to be discoverable

by the smartphone or tablet:

Bluetooth Discoverable Mode

Note: Once the reader is in discoverable mode, it will beep 2 times. You

will have 30 seconds to initiate connection to the host device. If the 30

seconds elapses without connecting to host device, scan the Discoverable

Mode barcode again.

4. The Code CR2600 reader will appear on the list of Bluetooth devices in the

smartphone or tablet, select the reader to initiate connection. Some smart-

phones or tablets will require the user to manually refresh the list of devices

before the Code CR2600 will appear for connection.

Note: The Code CR2600 will be the only reader listed for selection once

the Discoverable Mode barcode is scanned. Users of the CR2300/CR3600

should also select the Code CR2600 device for connection.

5. A window with a PIN will appear on the device.

6. When the reader beeps 2 times, it is ready for PIN entry. Using the PIN

Number Reference Barcodes (located on page 6), scan each of the PIN

digits with your reader. You will have 30 seconds to enter the PIN. Scan the

‘Submit PIN’ barcode when the PIN sequence has been entered.

7. The device will show a positive connection indicator when connection is

successful. The reader will beep once when connected and the wireless icon

LED will remain solid.

The bottom trigger button on the

CR2300/CR2600 can be conﬁgured

to toggle the smartphone or tablet’s

on-screen keyboard.

If using the CR3600, the left

trigger button can be conﬁgured

to toggle the keyboard.

To activate this feature, scan the following barcode:

Keyboard Display Option On

To reset the trigger back to the default settings, scan the following barcode:

Keyboard Display Option Off

*This Keyboard Display option is only compatible with Apple iOS.

1.0 - Initial Pairing Instructions for Bluetooth®Connection to Smartphones and Tablets

D020625_03 Bluetooth Connection Integration Guide

1. To re-establish connection to another host device already paired with the

reader, scan the following barcode:

Switch Host Device

2. The Code CR2600 will appear in the list of devices in the Bluetooth menu

on your device. Select the reader to initiate connection.

Note: If the Code CR2300/CR2600/CR3600 battery has been removed,

the reader is out of range, or is powered off while in default connection

settings, the reader will initiate connection to the most recent host device

when powered back on.

To clear reader connection from all Bluetooth devices, scan the

following barcode:

Clear Bluetooth Connection

Note: To re-establish connection once connection history has been cleared,

repeat steps 1-8 of Initial Pairing Instructions.

3.0 - Reconnect to Other Bluetooth®Devices

4.0 - Clear Connection History

D020625_03 Bluetooth Connection Integration Guide

A Bluetooth dongle may be needed if it is not built into the host device.

1. Find and select the Bluetooth icon in lower right notiﬁcation tray.

2. Right-click on the Bluetooth icon. Select ‘Add a Device’

from the list of options.

3. Scan the following barcode to enable your reader to be

discoverable by Windows 7:

Bluetooth Discoverable Mode

Note: Once the reader is in discoverable mode, it will beep 2 times. You

will have 30 seconds to initiate connection to host device. If 30 seconds

elapses without connecting to host device, repeat steps 1-3.

4. The Code reader will appear as a device option in the ‘Add a Device’

window. Select the Code CR2600 device.

Note: The Code CR2600 will be the only reader listed for selection once

the Discoverable Mode barcode is scanned. Users of the CR2300/CR3600

should also select the Code CR2600 device for connection.

5. Once the CR2600 device has been selected, a screen will appear contain-

ing a PIN.

6. When the reader beeps 2 times, it is ready for PIN entry. Using the PIN

Number Reference Barcodes (located on page 6), scan each of the PIN

digits with your reader. You will have 30 seconds to enter the PIN. Scan the

‘Submit PIN’ barcode when the PIN sequence has been entered.

Note: Failure to complete PIN entry within 30 seconds will result in a

‘Try Again’ notiﬁcation button. Press the button and repeat steps 3-6.

7. Once the installation of the reader driver is completed, a ‘this device has

been successfully added to this computer’ window will appear.

8. Reader will beep once and the wireless icon LED will remain solid

when successfully connected.

9. To test connection, open ‘notepad’ and scan barcodes. If data

appears on notepad after each scan, you have successful connected

to Windows 7. If notepad is not showing scanned data, remove the

BT device from the Bluetooth device screen and repeat steps 1-7.

5.0 - Initial Pairing Instructions for Bluetooth®Connection to Windows®7

D020625_03 Bluetooth Connection Integration Guide

A Bluetooth dongle may be needed if it is not built into the host device.

1. From the Start screen, select ‘Settings’ then select

‘Change PC settings.’

Note: To bring up the settings menu, press the Windows and C keys

simultaneously on the keyboard. If using a mouse, hover the mouse

in the top-right corner. Tablet or PC users with a touch screen, swipe

your ﬁnger inward from the top right corner.

2. Scan the following barcode to enable your reader to be

discoverable by Windows 8:

Bluetooth Discoverable Mode

Note: Once the reader is in discoverable mode, it will beep 2 times. You

will have 30 seconds to initiate connection to host device. If 30 seconds

elapses without connecting to host device, scan the discoverable mode

barcode again.

3. Select ‘Devices’ and then select ‘Add a Device.’

4. Your Code reader will appear as a device option on the ‘Devices’

window. Select the Code CR2600 device.

Note: The Code CR2600 will be the only reader listed for selection once

the Discoverable Mode barcode is scanned. Users of the CR2300/CR3600

should also select the CR2600 device for connection.

5. Once the Code CR2600 device has been selected, a screen will appear

containing a PIN (Passcode). Windows 8 will occasionally provide an entry

box for users to create their own passcode; enter the numeric passcode of

your choice.

6. When the reader beeps 2 times, it is ready for passcode entry. Using

the PIN Reference Barcodes (located on page 6), scan each of the passcode

digits with your reader. You will have 30 seconds to enter the passcode. Scan

‘Submit PIN’ when the passcode sequence has been entered.

7. The Code CR2600 will appear as a device if the passcode has been

entered correctly.

6.0 - Initial Pairing Instructions for Bluetooth®Connection to Windows 8

D020625_03 Bluetooth Connection Integration Guide

8. Reader will beep once and the wireless icon LED will remain solid

when successfully connected.

9. To test connection, open ‘notepad’ and scan barcodes. If data

appears on notepad after each scan, you have successful connected

to Windows 8. If notepad is not showing scanned data, remove the

BT device from the Bluetooth device screen and repeat steps 1-9.

D020625_03 Bluetooth Connection Integration Guide

1. From the Start screen, select ‘Settings’.

Note: To bring up the settings menu, press the Windows and C keys

simultaneously on the keyboard. If using a mouse, hover the mouse

in the top-right corner. Tablet or PC users with a touch screen, swipe

your ﬁnger inward from the top right corner.

2. In the Settings dialog, choose ‘Devices’, then ‘Bluetooth’.

3. Scan the following barcode to enable your reader to be

discoverable by Windows 10:

Bluetooth Discoverable Mode

Note: Once the reader is in discoverable mode, it will beep 2 times. You

will have 30 seconds to initiate connection to host device. If 30 seconds

elapses without connecting to host device, scan the discoverable mode

barcode again.

4. When the Code device is ready to pair, it will appear in the Manage

Bluetooth devices list. (In this example we are using a Code CR3600 Palm

device.)

5. Click on the device in the list, then Pair.

6. Once the Code CR3600 device has been selected, a screen will appear

containing a PIN (Passcode). Windows 10 will occasionally provide an entry

box for users to create their own passcode; enter the numeric passcode of

your choice.

7. When the reader beeps 2 times, it is ready for passcode entry. Using

the PIN Reference Barcodes (located on page 6), scan each of the passcode

digits with your reader. You will have 30 seconds to enter the passcode. Scan

‘Submit PIN’ when the passcode sequence has been entered.

8.The device will appear in the Manage Bluetooth devices as a Connected

device.

9. Reader will beep once and the wireless icon LED will remain solid

when successfully connected.

10. To test connection, open ‘notepad’ and scan barcodes. If data

appears on notepad after each scan, you have successful connected

to Windows 10. If notepad is not showing scanned data, remove the

BT device from the Bluetooth device screen and repeat steps 1-10.

7.0 - Initial Pairing Instructions for Bluetooth®Connection to Windows 10

D020625_03 Bluetooth Connection Integration Guide

A Bluetooth dongle may be needed if it is not built into the host device.

1. Find and select the Bluetooth icon in lower right notiﬁcation tray.

2. Right-click on the Bluetooth icon. Select ‘Open Settings’

3. On the Options tab, check the ﬁrst three options.

4. Open the COM Ports tab.

5. Select Add.

6. Select ‘Choose Incoming COM Port’, followed by ‘OK’.

7. Windows will install the COM Port.

8. When installation is complete, the COM Port will appear on the COM Port

tab. The Port # should be noted for a future step.

9. Open the Hardware tab, to view installed Bluetooth devices.

8.0 - Initial Pairing Instructions for Bluetooth Connection to Internal Bluetooth of a PC

as a Virtual COM Port

D020625_03 Bluetooth Connection Integration Guide

10. Open the Properties of the installed Bluetooth Adapter.

11. Select the Advanced tab.

12. Make a note of the Address for a future step.

13. Go to www.codecorp.com, and select the Support tab.

13. Select the QuickConnect Code™icon.

14. Enter the Bluetooth Address (from step 12), and select Submit to gener-

ate a QuickConnect Code™.

15. Right click on the QuickConnect Code™ to save the conﬁguration bar-

code. Print the barcode and set aside.

16. Open the COM Port created in Step 8, using a terminal application.

(We’ve used RealTerm)

Andere Handbücher für CORTEXJPOS CR2300

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Code Barcode-Lesegerät Handbücher

Code

Code CR950 Bedienungsanleitung

Code

Code CR2 Bedienungsanleitung

Code

Code Code Reader CR3500 Bedienungsanleitung

Code

Code Reader 1200 Bedienungsanleitung

Code

Code Code Reader CR3500 Bedienungsanleitung

Code

Code CR3 Bedienungsanleitung

Code

Code CR2700 Bedienungsanleitung

Code

Code CR2700 Bedienungsanleitung

Code

Code CR4400 Bedienerhandbuch

Code

Code CORTEXJPOS CR6000 Bedienungsanleitung

Code

Code Code Reader 1000 Bedienungsanleitung

Code

Code CR821 Series Kurzanleitung zur Einrichtung

Code

Code 2600 Bedienungsanleitung

Code

Code CR8200 Bedienungsanleitung

Code

Code CR900FD Bedienungsanleitung

Code

Code Code Reader CR3500 Bedienungsanleitung

Code

Code CR3600 Bedienungsanleitung

Code

Code CR4405 Bedienungsanleitung

Code

Code CR3 Bedienungsanleitung

Code

Code CR1000 Bedienungsanleitung

Code

Code 2600 Bedienungsanleitung

Code

Code CR1500-K10 Series Bedienungsanleitung

Code

Code Code Reader 1000 Bedienungsanleitung

Code

Code CR3600 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung