CODELOCKS CL160 Bedienungsanleitung

Find more online at www.codelockssupport.com

Page 1

CL160 Code Change Instructions

PUSH BUTTON LOCK

EasyCode CL160 locks can be used at home on doors, garages and

garden sheds, and at work in offices, workshops and storerooms

requiring restricted access. Available in Silver Grey.

MANY CODES TO CHOOSE FROM

The code chamber consists of 10 buttons from which the code is

selected. The ‘C’ button is used to re-set the chamber after an

incorrect entry, and which must always be used as the first digit of a

code. The ‘A’ button is used to change the code; see code change

sequences. Buttons may only be used ONCE in a code. For

example, 1212 is not possible.

A code, or combination, can be entered in any order or sequence;

e.g. 1234 can be 4321 or 1342 or whatever sequence is most

convenient to remember. With 10 buttons, over 1000 different codes

are available, any of which can be entered in any sequence.

The total is arrived at as follows:

Locks come complete with random code selected. The lock can be

placed into Easy Code Function or Quick Code Function. Easy Code

requires the lock to be removed from the door. Quick Code is an

optional function that allows the code to be changed while the lock is

fitted to the door.

It is recommended that the code is changed regularly to

prevent compromise.

CODE CHANGE SEQUENCES

PRIOR TO INSTALLATION

1. Select front plate and identify ‘A’ button . On initial(FIG 1)

installation this button will be fixed by a retaining screw on the inside

face of the front plate.

2. Remove retaining screw to begin code change process.

3. Enter code, rotate lever and hold in place, depress ‘A’ button and

hold in place, release lever, holding ‘A’ button.

4. Release the ‘A’ button which is now held in the retained position

by the lock. The lock is now in Code Change Mode, .(FIG 2)

5. Locate code card (item 10 on installation contents list). Ignoring

the ‘C’ and ‘A’ buttons, rotate each digit of the code anti-clockwise (F

using the code change tool provided and ensure the indicatorsIG 4)

on the back are all facing inwards . (FIG 3)

Find more online at www.codelockssupport.com

Page 2

6. Select and enter your new code rotating each digit clockwise using the code change tool provided .(FIG 5)

7. Press ‘C’ clear button followed by your new code. Rotate the lever fully and the ‘A’ button will revert to normal position.(FIG 6)

: If ‘A’ button does not return refer to point 5 and check the position of the indictors. If required reset all turning anti-clockwise as perNote FIG

and repeat steps.3

8. If EasyCode Function is required, replace retaining screw behind ‘A’ button, to prevent on-door code change. For QuickCode Function

leave retaining screw out.

AFTER INSTALLATION

A. Press ‘A’ button. If button will not depress, remove front plate from the door and follow code change sequence from bullet points 1-7.

B. Press ‘A’ Button. If button will depress follow the code change sequence from bullet point 3 -6. Please ensure the door is held in the open

position until code sequence has been verified.

MAINTENANCE

No maintenance of the working parts is necessary. To maintain the finish the lock should be cleaned regularly with a soft cloth.DO NOT OIL.

A silicone spray or similar, should be used to provide a protective film against grit and grime.

GUARANTEE

If any Codelocks mechanical lock should develop a fault, at any time due to manufacturing, just call the Codelocks Helpline and arrange for it

to be repaired free of charge.

Andere CODELOCKS Türschloss Handbücher

CODELOCKS

CODELOCKS CL610 Bedienungsanleitung

CODELOCKS

CODELOCKS CL520 Bedienungsanleitung

CODELOCKS

CODELOCKS CL460 Bedienungsanleitung

CODELOCKS

CODELOCKS 4010 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5010BB Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS 2010 Bedienungsanleitung

CODELOCKS

CODELOCKS CL500 Administratorhandbuch

CODELOCKS

CODELOCKS KL1200 Bedienungsanleitung

CODELOCKS

CODELOCKS CL1200 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5000 Bedienungsanleitung

CODELOCKS

CODELOCKS KL1000 G3 NetCode Bedienungsanleitung

CODELOCKS

CODELOCKS CL600 Bedienungsanleitung

CODELOCKS

CODELOCKS GLASS DOOR LOCK Bedienungsanleitung

CODELOCKS

CODELOCKS 0460 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5510 Bedienungsanleitung

CODELOCKS

CODELOCKS 4OOO ELECTRONIC Bedienungsanleitung

CODELOCKS

CODELOCKS CL400 Bedienungsanleitung

CODELOCKS

CODELOCKS KL1000 Bedienungsanleitung

CODELOCKS

CODELOCKS 400 mechanical Administratorhandbuch

CODELOCKS

CODELOCKS CODELOCK 300 Bedienungsanleitung

CODELOCKS

CODELOCKS Codelock 100 Bedienungsanleitung

CODELOCKS

CODELOCKS KL1000 Classic+ Bedienungsanleitung

CODELOCKS

CODELOCKS 0460 Administratorhandbuch

Beliebte Türschloss Handbücher anderer Marken

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

We.lock

We.lock SECBNEBL51 Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

JAKO

JAKO JKBTNX4 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung