Come.up Winch DV-3500i Bedienungsanleitung

Utility Duty Winch

Model: DV-3500i

PN: 641101 12VDC 641105 12VDC 641371 24VDC

641233 24VDC 641236 12VDC

Introduction

 Feature

Line pull: 1,588 kg / 3,500 lb wire rope first layer

Wire rope: 5.5 mm x 15.2 m (7/32" x 50') galvanized aircraft A7 × 19

Brake: Mechanical and dynamic brakes hold full load

Clutch: Raise the clutch level for rapid wire rope payout

Control: Handheld pendant switch powers the winch

 Unpacking

．Integrated solenoid kit…………………………………………… 1 pc

．Remote control…………………………………………………… 1 pc

．Wire rope with hook……………………………………………… 1 pc

．Roller fairlead…………………………………………………….. 1 pc

．1.5 m battery leads………………………………………………… 1 pc

．Circuit breaker……………………………………………………… 1 pc

 Read this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

 Information requesting or parts ordering

Please specify the followings information:

．Winch PN ．Part descri

tion

．Serial number ．Re

lacement

art number

．Quantit

for each par

Installation

Before using the winch, make sure all electrical

components have no corrosion or damaged; the

environment should be clear and dry.

The voltage drop must not exceed 10% of the

nominal voltage of 12V or 24V under normal

operation condition.

 Winch and roller fairlead mounting

 Use the mounting hardware supplied to mount the winch on a flat

surface.

 The motor, drum and gear housing must be properly aligned.

 Wiring Diagram

 Attach the ground lead firmly to the negative (–) battery terminal and

power lead to the positive (+) battery terminal. The voltage drop for the

winch motor must not exceed 10% of the nominal voltage of 12/24V DC.

 Attach the red lead, positive (+), tightly to the circuit breaker marked AUX,

meanwhile, connect the copper plate to the other end of the circuit

breaker marked BAT.

 Connect the copper plate to the connector of the battery.

 Nut fastening for motor & solenoid

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for motor nut M6 is 5.7 N-m / 50 lb-in and solenoid nut

M8 is 14 N-m / 124 lb-in.

Warning

 The winch is not intended to be used in any manner for the movement or

lifting of personnel.

 The pulling capacity shown is based on the wire rope first layer on the

drum.

 The rope winding on the drum shall remain 5 wraps from the drum.

Parts List

Item No. Description Part No. Qty

1 Rear cover 880136 1

2 Remote socket kit 880137 1

3 Motor kit, 12V 880296 1

Motor kit, 24V 880297

4 Brake kit 880280 1

5 Gear box kit 880281 1

6 Ring gear 880141 1

7 1st stage carrier 880283 1

8 2nd stage carrier 880284 1

9 3rd stage carrier 880285 1

10 Drum kit 880286 1

11 Base plate kit 881284 1

12 Clutch kit 880287 1

13 Wire rope w/hook 880298 1

14 Roller fairlead 880289 1

15 Mounting hardware 880290 1

16 Solenoid pack, 12V 880291 1

Solenoid pack , 24V 881290

17 Circuit breaker kit, 12V 880299 1

Circuit breaker kit, 24V 880300

18 Remote control 880295 1

19 Handsaver strap 880026 1

Winch Assembly

2022/03/29 Ver:10

Dieses Handbuch passt für folgende Modelle

Andere Come.up Winch Winde Handbücher

Come.up Winch

Come.up Winch Seal Gen2 9.5i Bedienungsanleitung

Come.up Winch

Come.up Winch DV-6s Bedienungsanleitung

Come.up Winch

Come.up Winch DV-6000S Bedienungsanleitung

Come.up Winch

Come.up Winch GIO 120s Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Slim 9.5rs Bedienungsanleitung

Come.up Winch

Come.up Winch Walrus 16.5 Bedienungsanleitung

Come.up Winch

Come.up Winch Cub 4 Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Slim 12.5 Bedienungsanleitung

Come.up Winch

Come.up Winch 295750 12V Bedienungsanleitung

Come.up Winch

Come.up Winch Cub 2s Bedienungsanleitung

Come.up Winch

Come.up Winch GIO 80 Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Gen2 9.5si Bedienungsanleitung

Come.up Winch

Come.up Winch Rhino 12 Bedienungsanleitung

Come.up Winch

Come.up Winch Rhino 8 Pro Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Gen2 12.5rs Bedienungsanleitung

Come.up Winch

Come.up Winch SOLO 12.5rs Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Gen2 9.5rs Bedienungsanleitung

Come.up Winch

Come.up Winch GTD-650 Bedienungsanleitung

Come.up Winch

Come.up Winch DV-4500i Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Gen2 9.5 Bedienungsanleitung

Come.up Winch

Come.up Winch GIO 120 Bedienungsanleitung

Come.up Winch

Come.up Winch DV-9i Bedienungsanleitung

Come.up Winch

Come.up Winch GIO 100 Bedienungsanleitung

Come.up Winch

Come.up Winch Seal Gen2 20.0 Bedienungsanleitung

Beliebte Winde Handbücher anderer Marken

WARRIOR

WARRIOR Trojan 40PUS12 Kurzanleitung

SVERO

SVERO 16 Bedienungsanleitung

Warrior Winches

Warrior Winches C10000NH Bedienungsanleitung

Badland Winches

Badland Winches 68146 Bedienungsanleitung

Bush

Bush II Series Bedienungsanleitung

Badland

Badland APEX 5500 Bedienungsanleitung

Quadratec

Quadratec Q9000 Synthetic Handbuch

C-Max

C-Max VIGO Bedienungsanleitung

Comeup

Comeup DV-9 Bedienungsanleitung

Orvea

Orvea Italwinch 805 Bedienungsanleitung

Prowinch

Prowinch PWJTHF300 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LD2000-A Bedienungsanleitung

Topex

Topex 97X080 Bedienungsanleitung

Eastbound

Eastbound MotoWinch 1707001 Bedienungsanleitung

Runva

Runva EWD8000 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Installationsanleitung

Granit

Granit 11157675 Bedienungsanleitung

TREX

TREX TB75 Bedienungsanleitung