Comelit AHPTZ110A Bedienungsanleitung

AHD PTZ CAMERA

ART. AHPTZ110A –AHPTZ120A

Please read this manual thoroughly before use and keep it for future reference

Contents

1Menu settings ...................................................................................................................1

1.1 System information................................................................................................2

1.2 PTZ settings ..........................................................................................................3

1.2.2 Display settings.........................................................................................4

1.2.3 Intelligent scan settings.............................................................................5

1.2.4 Control settings.........................................................................................6

1.2.5 PTZ camera address.................................................................................7

1.2.6 Alarm settings ...........................................................................................8

1.2.7 IR light settings..........................................................................................9

1.3 Camera settings...................................................................................................10

1.3.2 Camera settings......................................................................................11

1.3.3 BLC.........................................................................................................12

1.3.4 Dynamic detection...................................................................................13

1.3.5 Focusing settings....................................................................................14

1.3.6 Exposure settings....................................................................................15

1.3.7 Additional menu ......................................................................................16

1.3.8 Reset camera .........................................................................................17

1.4 Reset camera .....................................................................................................18

1.4.1 Presets lock ...........................................................................................19

1.4.2 Enable password ...................................................................................20

1.5 System settings ...................................................................................................21

1.5.1 Delete settings ........................................................................................22

1.5.2 Delete settings ........................................................................................23

1.5.3 Restore factory settings...........................................................................24

Cautions

Non-professional do not disassemble the PTZ camera. Please read this

manual carefully before operating. (This specification is subject to change

without prior notice.)

Cut the power supply off before operating the device to avoid damage caused

by mis-operation.

Interior of the PTZ camera are precision optical and electrical instruments.

Heavy pressure, shock and other incorrect operations should be prevented.

Otherwise, may cause damage to product.

Please do not use the product under circumstances where the limits exceed

the maximum specified temperature, humidity or power supply specifications.

Contents in this manual may be different from the edition that you are using.

Should any unsolved problem occur given that the product is used according

to this manual, please contact our technical support department or your

product suppliers.

This manual content will be updated unscheduled, our company reserves the

right to do manual contents update without further notice.

The default factory address code is No. 1. The automatic recognition

communication protocols are PELCO-D and PELCO-P. The automatic

recognition baud rate are 2400 bps, 4800 bps, 9600 BPS and 19200 bps.

System Requirements

1 Control keyboard or other control device (with RS485 port)

2 Monitor or other display device (with VIDEO IN port)

3 100÷240 VAC input, 24 VDC/1.5A output power adapter

Installation environment

Installation environment requirements

Do not use in humid or high temperature environment, pay attention to keep good

ventilation, avoid installation in the environment of severe vibration, as far as possible away

from heating devices.

Recommended using environment

Temperature：-30 ÷ +60 °C

Humidity ：0% ÷ 90% RH (not condensing)

Installation Steps

Before installing the smart PTZ camera, we hope you have confirmed that your control

keyboard and monitor are working properly. After confirming that your device system is in

good condition, please follow the following steps and keep your hands clean and dry.

Open the packing box and check the integrity of the goods.

Remove all items needed for installation

Connect relevant cables (power supply, control linear, alarm linear, etc.)

according to actual needs

Turn on the power supply

Note：

Please check carefully when unpacking the box to make sure that the items in

it are in accordance with the list.

Please read the user manual carefully before installation.

When installing the camera, be sure to turn off all the power supply.

Check the power supply voltage to prevent device damage caused by voltage

mismatch

Connect power supply

Wiring instructions: wire functions introduction

from top to bottom

Art. AHPTZ110A

①Video input

②Reset

③Power supply

④Alarm input

⑤Alarm output

⑥RS485

Art. AHPTZ120A

①Video input

②Reset

③Power supply -

④Power supply +

⑤Alarm input

⑥Alarm Output/RS485

Operation method

The PTZ camera can be connected with keyboard device through RS485. The camera can

be remotely controlled by moving up and down, moving left and right, and zooming lens.

General functions

4.1 Up and down, left and right moving functions

Up, down, left and right can be controlled by rocker. The speed of rocker control is

changeable. The bigger the angle of inclination, the faster the speed of movement. The

position diagram of rocker handle is shown in Figure 4-1-1.

Left Right

Down

Figure 4-1-1

4.2 Lens control

Change the camera's field of view (zoom in and zoom out) press [TELE] or [WIDE].

4.3 Basic operation of main menu

（1）“95+CALL” enters the camera main menu.

（2）The rocker handle moves up and down to see the menu bar pointed by the cursor; the

rocker handle moves right to enter the sub-menu of the item where the cursor is located or to

enter the function of the item where the cursor is located; the rocker handle moves left (or

executes the "Back" menu item) to return to the previous menu.

（3）If the cursor is in the selection state of the current menu item, moving the rocker up or

down can change the current selection, and moving the rocker left or right can exit the current

selection and save the current selection.

（4）If the menu item where the cursor is located has a subordinate menu, press [OPEN] to

enter the subordinate menu.

（5）Press [CLOSE] (or execute the "Exit” menu item) to close the menu.

Tip: The menu structure of the PTZ camera is shown in the menu index.

1 Menu settings

After the machine is installed and powered on, the PTZ camera will be self-checked, and

the screen will display boot information, as shown in Figure 1-0-0.

Display PTZ camera address

Display protocol recognition method

Display baud rate recognition method

Figure1-0-0

Explanation: When the PTZ camera is set up differently, the specific values of each item

will also be different. This prompt will disappear until the PTZ camera has completed self-

examination. Note: Only when the system display function is turned on in the menu, will

display the boot information.

Enter the main menu: Set the 95 preset point first and then calling the 95 preset point.

At this time, the screen shows the main menu, as shown in Figure 1-0-1.

Display system information→(Figure1-1-1)

PTZ settings →(Figure1-2-1)

Camera settings →(Figure1-3-1)

Permissions settings→(Figure1-4-1)

System settings →(Figure1-5-1)

Figure1-0-1

1.1 System information

In the menu of Figure 5-0-1, move the rocker up and down so that the cursor points to the

system information, and then move the rocker to the right to display the system information,

as shown in Figure 5-1-1.

Display PTZ camera address

Display communication protocol

Display communication baud rate

Display software version

Figure 5-1-1

Description: The arbitrary movement of the rocker to exit system information display.

Address 255

Communication protocol PELCO-D

Baud rate 2400

Software version V1.10

Address 255

Communication protocol PELCOD

Baud rate 9600

Main menu

System information

PTZ settings

Camera settings

Permissions settings

System settings

Exit

1.2 PTZ settings

In the menu of Figure 1-0-1, move the rocker up and down to point the cursor at PTZ

settings, and then move the rocker to the right to enter PTZ settings menu, as shown in

Figure 1-2-1.

Display settings→( Figure 1-2-2)

Intelligent scan settings →(Figure 1-2-3)

Control settings →(Figure 1-2-4)

PTZ camera address settings →(Figure 1-2-5)

Alarm settings→(Figure 1-2-6)

IR light settings →(Figure 1-2-7)

Figure 1-2-1

1-2-2 Display settings

In the menu of Figure 1-2-1, move the rocker up and down so that the cursor points to

the display settings, and then move the rocker to the right to enter the display settings menu.

As shown in figure 1-2-2.

Presets settings →(Figure 1-2-3)

Privacy mask settings →(Figure 1-2-5)

Figure 1-2-2

①Boot information display: on and off optional, default is on. When set to turn on, when

the PTZ camera is powered on, the boot information is displayed.

②PTZ camera function display: on and off optional, default is off. When set to turn on, the

PTZ camera displays the type and number of the current scan when it is running.

③PTZ camera coordinate display: on and off optional, default is on. When set to turn on,

the screen displays the horizontal and vertical position angle of the current PTZ, i.e.

Coordinates

Display settings

Boot information display On

PTZ camera function display Off

PTZ camera coordinate display Off

Presets display

Privacy mask settings

Back

Exit

退出

PTZ settings

Display settings

Intelligent scan settings

Control settings

PTZ camera address settings

Alarm settings

IR light settings

Back

④Presets display: on and off optional, default is off. When set to turn on, the PTZ camera

displays the name of the current preset point when running the preset point.

⑤Privacy mask settings :default is off, calling the menu, go into the menu interface, open

the privacy mask block, set the size of the privacy mask block, click zoom +-, focus +-.

⑥Back: returns the interface for setting privacy masks.

⑦Exit: close the interface for setting privacy masks.

1-2-3 Intelligent scan settings

In Figure 1-2-1, move the rocker up and down so that the cursor points to the intelligent

scan settings, and then move the rocker to the right to enter the intelligent scan settings menu.

As shown in Figure 1-2-3.

Linear scan settings →(Figure 1-2-7)

Cruise scan settings →(Figure 1-2-8)

Pattern scan settings →(Figure 1-2-10)

Group scan settings →(Figure 1-2-11)

Continuous scan settings →(Figure 1-2-13)

Figure 1-2-3

①Linear scan settings: in Figure 1-2-7, move the rocker up and down so that the cursor

points to linear scan settings, and then move the rocker to the right to enter the linear

scan settings menu, as shown in Figure 1-2-7.

Figure1-2-7

INo.:1-8 optional, PTZ camera can set 8 groups linear scan.

II In the menu of Figure 1-2-7, move the rocker up and down so that the cursor points to

set linear scan, and then move the rocker to the right to set linear scan state. The rocker

Intelligent scan settings

Linear scan settings

Cruise scan settings

Pattern scan settings

Group scan settings

Continuous scan settings

Back

Exit

Linear scan settings

No. 1

Set linear scan

Speed 9

Range selection Large radian

Calling linear scan

Delete current

Back

Exit

moves up and down to select the starting position, and then clicks ［CLOSE］to finish the

editing of the starting point. The same method is used to set the end position. Press

［CLOSE］to save the linear scan settings and return to the linear scan settings menu.

III Speed: 1-9 optional, default is 9. 1 is the minimum speed, 9 is maximum speed.

IV Range selection: small or large radian optional, default is large radian. When the

camera is set to a large radian, the horizontal trajectory of the camera is the maximum

radian at the starting point and the ending point, that is, the maximum-scale scanning and

monitoring.

VIn the menu of Figure 1-2-7, move the rocker up and down to make the cursor point to

calling linear scan, then move the rocker to the right to run the current linear scan, and

move the rocker arbitrarily back to the linear scan settings menu.

VI In the menu of Figure 1-2-7, move the rocker up and down so that the cursor points to

delete the current, and then move the rocker to the right to delete the current linear scan.

②Cruise scan settings: in Figure 1-2-8, move the rocker up and down so that the cursor

points to the cruise scan settings, and then move the rocker to the right to enter the

cruise scan settings menu, as shown in Figure 1-2-8.

Edit cruise →(Figure 1-2-9)

Figure 1-2-8

INo. : 1-8 optional. PTZ camera can set 8 groups cruise scan.

II In Figure 1-2-8, move the rocker up and down so that the cursor points to the edit

cruises, then move to the right to enters the editing cruise interface, as shown in Figure 1-

2-9.

Cruise scan settings

No. 1

Edit cruise

Open cruise

Delete current

Back

Exit

Andere Handbücher für AHPTZ110A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Comelit Sicherheitskamera Handbücher

Comelit

Comelit 100 SERIES Bedienungsanleitung

Comelit

Comelit 40863 Bedienungsanleitung

Comelit

Comelit AHCAM742A Bedienungsanleitung

Comelit

Comelit AHCAM 100 Series Bedienungsanleitung

Comelit

Comelit IPPTZ120IRC Bedienungsanleitung

Comelit

Comelit IPTHCAM1QVGA Bedienungsanleitung

Comelit

Comelit IPCAM1848A Bedienungsanleitung

Comelit

Comelit AHCAM727A Bedienungsanleitung

Comelit

Comelit 40646 Bedienungsanleitung

Comelit

Comelit IPTHCAM1DUAL Bedienungsanleitung

Comelit

Comelit HCAM433B Bedienungsanleitung

Comelit

Comelit ADVANCE Series Bedienungsanleitung

Comelit

Comelit IPPTZ110IRA Bedienungsanleitung

Comelit

Comelit IPTCAMN04FA Bedienungsanleitung

Comelit

Comelit IPSCAMA08F04A Bedienungsanleitung

Comelit

Comelit IPPTZA02Z20A Bedienungsanleitung

Comelit

Comelit 40861 Bedienungsanleitung

Comelit

Comelit AHCAM722A Bedienungsanleitung

Comelit

Comelit WIKIT040A Bedienungsanleitung

Comelit

Comelit AHPTZ10IRC Bedienungsanleitung

Comelit

Comelit IPDCAMS05F01B Bedienungsanleitung

Comelit

Comelit IPCAM703A Bedienungsanleitung

Comelit

Comelit PTZ IP Bedienerhandbuch

Comelit

Comelit IPLPRA02ZA Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung