Longer Rope Compact Winch
Model: CWL-200L
PN: 372882 220V 372788 220V
372764 110V 375432 230V
373200 240V 371313 110V
Introduction
Feature
Lifting capacity: 200 kg wire rope top layer
Lifting height: 69 m for 5 mm x 71 m rope / 98 m for 4 mm x 100 m rope
Lifting speed: 11 – 16 m/min
Motor output: 1.2kw x 12A at 110V ; 1.5kw x 7.5A at 220-240V
Brake: Electromagnetic and mechanical ratchets
Control: Pendant switch powers the winch
Unpacking
．Winch assembly 1pc
．Wire rope 5 mm x 71 m with hook 1pc
．Wire rope 4 mm x 100 m with hook for PN：373200 1pc
．Power lead 1.5 mm2
x 3C x 3 m and plug 1pc
．Power lead 2.0 mm2
x 3C x 3.4 m and plug for PN：372764 1pc
．Pendant switch CPB-313 w/cord 1.25 mm2
x 6C x 10m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Winch PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Wire rope replacement
．Insert the wire rope into the hole of drum and fix it with a P. T. screw, then
press the "UP" button of switch for rotate the drum in the lifting direction.
．Wind the wire rope accurately around the drum, and an irregular winding
will cause the load to be swing, thus damaging the wire and reducing the
life of the winch.
．When replacing, please refer to the following procedures.
*Pull out a R-dowel "D" from the round head pin "C".
*Pull out a round head pin "C” from hook body "A".
*Put a wire rope "B" into the hole of hook body "A", and insert a round
head pin "C" through wire rope and fixture hole of hook body "A".
*Insert an R-dower "D" into the hole of round head pin "C".
Wiring Diagram
