Compact Winch
Model: CWS-80
PN: 422303 110V 422774 220V 422287 230V 423766 240V
422600 230V 422384 240V 422181 230V 422677 220V
422182 230V 420610 230V
Introduction
Feature
Lifting capacity: 80 kg wire rope top layer
Lifting height: 23 m
Lifting speed: 18 – 30 m/min
Brake: Electromagnetic and mechanical ratchet
Limit protection: Lifting and lowering limiters
Control: Pendant switch powers the winch
Unpacking
．Winch assembly 1pc
．Wire rope 4 mm x 24 m, except for PN 422677 1pc
．Wire rope 3.2 mm x 36 m for PN:422384 / 422182 / 420610 1pc
．Wight hook CHW-0032, except for PN 422677 1pc
．Power lead 1.5 mm2
x 3C x 5 m and plug 1pc
．Pendant switch PB-417 w/cord 1.25mm2
x 6C x 10m 1pc
．Pendant switch PO3.5 w/cord 1.25mm2
x 6C x 10m
for PN: 422181 / 422182 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Winch PN ．Serial number
．Part description ．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Wire rope replacement
．Put a new wire rope through the hole of the round plate of weight hook.
．Insert a sleeve pin through the thimble of wire rope.
．Insert a pin through the sleeve pin and bent it by a pliers.
．Let a new wire rope w/clamp through the limit lever and insert it into the
hole of the drum.
．Put a P.T. screw into the hole of the drum and tighten it by a hexagon
wrench.
．Press the ↑button to rotate the drum in the lifting direction.
．An uneven winding of wire rope may cause the load to be swing, thus
damaging the rope and reducing its life.
Wiring Diagram
Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
．The lifting capacity shown is based on the top layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
