Comeup DV-6000S Bedienungsanleitung

Self-Recovery Winch

Model: DV

PN: 854756 12V DC

856129 24V DC

Introduction

XFeature

Line

ull: 2,722 k

/ 6,000 lb wire ro

efirstla

Wire ro

e: 7.1 mm × 24.4 m

(

9/32" × 80

′

)

alvanized aircraft A7 × 19

Brake: Patented cone brake holds full load

Clutch: Turn the

-handle for ra

id wire ro

out

Control: Handheld

endant switch

owers the winch

XUnpacking

．Winch assembl

………………………………………………………….. 1

．Detachable control box ..………………………………………............. 1

．Remote control…………………………………………………………… 1

．Wire ro

e with hook……………………………………………………… 1

．Roller fairlead…………………………………………………………….. 1

．1.8 m

(

6′

)

e batter

leads……………...………………………. 1

XRead this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

XInformation requesting or parts ordering

Please specify the followings information:

．Winch PN ．Serial number

．Part description ．Replacement part number

．Quantity for each part

Installation

Before using the winch, make sure all electrical components have no

corrosion or damaged; the environment should be

clear and dry.

XWinch and roller fairlead mountings

．It is very important that the winch will be

mounted on a flat and hard surface of mounting

channel in order to make sure the motor, drum and gearbox housing are

aligned correctly.

．Roller fairlead does not mount to winch directly.

．The wire rope shall be wound in an under-wound orientation only.

．Four (4) M10 x 1.50 pitch 8.8 grade high tensile steel bolts must be used in

order to sustain the loads imposed on the winch mounting.

．Two (2) M12 x 1.75 pitch 8.8 grade high tensile steel bolts must be used

for fastening the roller fairlead into the mounting channel.

XWiring Diagram

Attach the black lead firmly to the negative (–)battery terminal and red lead

to the positive (+) battery terminal. The voltage drop for the winch motor

must not exceed 10% of the nominal voltage of 12/24V DC.

XNut fastening for motor & contactor

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．The rope winding on the drum shall remain 5 wraps from the drum.

Parts List

Ver:12

Item No. Description Part No. Qty

Motor 12V 881505

1 Motor 24V 881506 1

2 Tie bar kit 880076 2

3 Motor support rack 880077 1

4 Motor coupling 880078 1

5 Drum bushing 880006 1

6 Drum kit 880080 1

7 Drum bushing B 880081 1

8 Gearbox support rack 880082 1

9 Wire rope w/hook 880083 1

10 1st shaft 880084 1

11 Grounding lead 880085 1

12 3rd ring gear kit 880086 1

13 2nd stage carrier 880087 1

14 1st stage carrier 880088 1

15 Retaining ring 880089 1

16 1st & 2nd ring gear 880090 1

17 1st pinion kit 880091 1

18 Clutch kit 880092 1

19 Gear box kit 880093 1

20 Cone brake disc kit 880094 1

21 Brake clutch base 881099 1

22 Brake cover kit 880095 1

23 Roller fairlead WA-0508 880096 1

24 Mounting hardware 880097 1

25 Remote control WA-0310 880025 1

26 Handsaver strap 880026 1

Detachable control box 12V 880098

27 Detachable control box 24V 880099 1

27-1 Remote socket kit 881289 1

Detachable control pack 12V 881446

27-2 Detachable control pack 24V 881447 1

28 Handle kit 880103 1

Winch Assembly

Inhaltsverzeichnis

Andere Comeup Winde Handbücher

Comeup

Comeup CEP-3001-9MD Bedienungsanleitung

Comeup

Comeup CWG-30750 Bedienungsanleitung

Comeup

Comeup Cub 4s Bedienungsanleitung

Comeup

Comeup DV-9i Bedienungsanleitung

Comeup

Comeup CP-250 Bedienungsanleitung

Comeup

Comeup CWL-301L Bedienungsanleitung

Comeup

Comeup DV-6s Bedienungsanleitung

Comeup

Comeup DH-300 Bedienungsanleitung

Comeup

Comeup CWL-80 Bedienungsanleitung

Comeup

Comeup CWG-10077 Bedienungsanleitung

Comeup

Comeup Seal Gen2 9.5 Bedienungsanleitung

Comeup

Comeup HV-20000 Bedienungsanleitung

Comeup

Comeup CWG-500TH Bedienungsanleitung

Comeup

Comeup CWG-30565 Bedienungsanleitung

Comeup

Comeup CWG-30375 Bedienungsanleitung

Comeup

Comeup H-2500 Bedienungsanleitung

Comeup

Comeup Baby Winch CWS-300 Bedienungsanleitung

Comeup

Comeup DV-9 Bedienungsanleitung

Comeup

Comeup Seal 9.5si Bedienungsanleitung

Comeup

Comeup GTD-300 Bedienungsanleitung

Comeup

Comeup H-2500 Bedienungsanleitung

Comeup

Comeup ATV-1500 Bedienungsanleitung

Comeup

Comeup GTD-650 Bedienungsanleitung

Comeup

Comeup CP-750T Kurzanleitung

Beliebte Winde Handbücher anderer Marken

WARRIOR

WARRIOR Trojan 40PUS12 Kurzanleitung

SVERO

SVERO 16 Bedienungsanleitung

Warrior Winches

Warrior Winches C10000NH Bedienungsanleitung

Badland Winches

Badland Winches 68146 Bedienungsanleitung

Bush

Bush II Series Bedienungsanleitung

Badland

Badland APEX 5500 Bedienungsanleitung

Quadratec

Quadratec Q9000 Synthetic Handbuch

C-Max

C-Max VIGO Bedienungsanleitung

Orvea

Orvea Italwinch 805 Bedienungsanleitung

Prowinch

Prowinch PWJTHF300 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LD2000-A Bedienungsanleitung

Topex

Topex 97X080 Bedienungsanleitung

Eastbound

Eastbound MotoWinch 1707001 Bedienungsanleitung

Runva

Runva EWD8000 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Installationsanleitung

Granit

Granit 11157675 Bedienungsanleitung

TREX

TREX TB75 Bedienungsanleitung

Badland

Badland ZXR 2500 Bedienungsanleitung