Comeup Seal 9.5si Bedienungsanleitung

Self-Recovery Winch

Model: Sea

9.5s

PN: 293220 12V DC

Introduction

XFeature

Line pull: 4,309 kg / 9,500 lb synthetic rope first layer

Synthetic rope: 10mm × 30.5 m (3/8"×100′) synthetic rope SK-75

Brake: Patented cone brake holds full load

Clutch: Turn the T-handle for rapid rope payout

Control: Handheld pendant switch powers the winch

XUnpacking

．Winch assembly……………………………………………………......... 1 pc

．Control box………………………………………………………….......... 1 pc

．Remote control…………………………………………………………… 1 pc

．Synthetic rope with clevis hook……….………………………………… 1 pc

．Hawse fairlead……………………………………..…………………….. 1 pc

．1.8 m (6′) 2 gauge battery lead……………………..………………….. 1 pc

XRead this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

Installation

Before using the winch, make sure all electrical components have no

corrosion or damaged; the environment should be clear and dry.

XWinch and hawse fairlead mountings

xIt is very important that the winch will be mounted on

a flat and hard surface of mounting channel in order

to make sure the motor, drum and gearbox housing

are aligned correctly.

xHawse fairlead does not mount to the winch

directly.

xThe synthetic rope shall be wound in an

under-wound orientation only.

xFour (4) M10 x 1.50 pitch 8.8 grade high tensile steel bolts must be used

in order to sustain the loads imposed on the winch mounting.

xTwo (2) M12 x 1.75 pitch 8.8 grade high tensile steel bolts must be used

for fastening the hawse fairlead into the mounting channel.

XWiring Diagram

Attach the black lead firmly to the negative (–)battery terminal and red lead

to the positive (+) battery terminal. The voltage drop for the winch motor must

not exceed 10% of the nominal voltage of 12V DC.

XNut fastening for motor & contactor

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．

The rope winding on the drum shall remain 10 wraps from the drum to support

the rated load.

．Manufacturer is not responsible for the results of misuse, misapplication,

faulty installation or abuse of synthetic rope in any way.

Parts List

Item No. Description Part No. Qty

1 Motor 12V 881483 1

2 Tie bar kit 880349 2

3 Motor support rack 881562 1

4 Motor coupling 880005 1

5 Drum bushing 880006 2

6 Drum kit 881521 1

7 Gearbox support rack 881563 1

8 Grounding lead 880009 1

9 Synthetic rope 882025 1

10 1st shaft 880011 1

11 3rd ring gear kit 880114 1

12 3rd stage carrier 880115 1

13 2nd stage carrier 880116 1

14 1st stage carrier 880117 1

15 1st & 2nd ring gear 880118 1

16 1st pinion 880119 1

17 Clutch kit 881564 1

18 Gear box kit 880121 1

19 Cone brake disc kit 880122 1

20 Brake cover kit 880123 1

21 Hawse fairlead 881061 1

22 Mounting hardware 880125 1

23 Remote control 880126 1

24 Handsaver strap 880026 1

25 Control box 12V 880351 1

25-1 Remote socket kit 12V 880113 1

25-2 Control pack 12V 881413 1

26 Brake clutch base 881100 1

27 Motor side cover 881222 1

28 Clevis hook 882024 1

29 Damper 881557 1

30 Gloves 881558 1

Winch Assembly

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Comeup Winde Handbücher

Comeup

Comeup DV-12s light Bedienungsanleitung

Comeup

Comeup CWG-10151 Bedienungsanleitung

Comeup

Comeup CP-500T Bedienungsanleitung

Comeup

Comeup CP-200 Bedienungsanleitung

Comeup

Comeup GIO 100 Bedienungsanleitung

Comeup

Comeup DV-6s Bedienungsanleitung

Comeup

Comeup CWG-30375 Bedienungsanleitung

Comeup

Comeup GTD-2800 Bedienungsanleitung

Comeup

Comeup CWG-30375 Bedienungsanleitung

Comeup

Comeup DV-12s light Bedienungsanleitung

Comeup

Comeup H-2500 Bedienungsanleitung

Comeup

Comeup CWS-160 Bedienungsanleitung

Comeup

Comeup HV-10 Bedienungsanleitung

Comeup

Comeup DV-6 Bedienungsanleitung

Comeup

Comeup CWL-80 Bedienungsanleitung

Comeup

Comeup Cub3 Bedienungsanleitung

Comeup

Comeup CWL-80 Bedienungsanleitung

Comeup

Comeup Seal Slim 9.5rs Bedienungsanleitung

Comeup

Comeup CP-300 Bedienungsanleitung

Comeup

Comeup CWL-301 Bedienungsanleitung

Comeup

Comeup Wolf 12.0 Bedienungsanleitung

Comeup

Comeup CWL-80 Bedienungsanleitung

Comeup

Comeup CWL-200 Bedienungsanleitung

Comeup

Comeup CP-500 Bedienungsanleitung

Beliebte Winde Handbücher anderer Marken

WARRIOR

WARRIOR Trojan 40PUS12 Kurzanleitung

SVERO

SVERO 16 Bedienungsanleitung

Warrior Winches

Warrior Winches C10000NH Bedienungsanleitung

Badland Winches

Badland Winches 68146 Bedienungsanleitung

Bush

Bush II Series Bedienungsanleitung

Badland

Badland APEX 5500 Bedienungsanleitung

Quadratec

Quadratec Q9000 Synthetic Handbuch

C-Max

C-Max VIGO Bedienungsanleitung

Orvea

Orvea Italwinch 805 Bedienungsanleitung

Prowinch

Prowinch PWJTHF300 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LD2000-A Bedienungsanleitung

Topex

Topex 97X080 Bedienungsanleitung

Eastbound

Eastbound MotoWinch 1707001 Bedienungsanleitung

Runva

Runva EWD8000 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Installationsanleitung

Granit

Granit 11157675 Bedienungsanleitung

TREX

TREX TB75 Bedienungsanleitung

Badland

Badland ZXR 2500 Bedienungsanleitung