Comeup CP-200 Bedienungsanleitung

Electric Winch

Limited One (1) Year Warranty Statement

Comeup Industries Inc. ( ) warrants to the original purchaser that the mechanical compnents

and electrical components of the Electric Winch will be free of defects in material and

workmanship for one (1) year. All mounting kits and other accessories carry one (1) year

limited warranty against defects in material workmanship.

This Warranty applies only to the original purchaser of the winch. To obtain any warranty service, the

Purchaser under this Limited Warranty is requested to report or his authorized distributors

of any claims. The Purchaser must provide a copy of the proof of purchase bearing the winch serial

number, date of purchase, owners name email, or Tel & Fax, address and registration number. Any

product determines to be defective will be repaired or replaced at sole discretion

without charge to Buyer upon Buyer’s compliance with these procedures. Seller or its Authorized

Distributors may make reasonable charges for parts and labour for repairs not covered by this Limited

Warranty.

takes the responsibility for all parts and components to be free from defects in materials and

workmanship, but the following are hereby excluded and disclaimed:

(1). All warranties of wire rope assemblies after initial use.

(2). All warranties of fitness for a particular purpose.

(3). All warranties of the product’s finish

(4). All warranties of merchantability

The Limited Warranty does not cover any failure that results from improper installation, operation or

the Purchaser’s modification in design. reserves the right to change Product design without

notice. In situations in which has changed a product design, shall have no

obligation to upgrade or otherwise modify previously manufactured products.

Electric Winch

Thank you for purchasing a Winch. This manual covers operation and maintenance of

the winch. All information in this publication is based on the latest production information available at

the time of printing.

General Safety Precautions

The winch has been designed to give safe and dependable service if operated according to the

instructions. Please read and understand this manual before installation and operation of the winch.

Follow these general safety precautions:

Confirm that the winch complies with the using conditions.

Keep the winch secure strongly and the rope is not wound to be deviated to the drum.

Don't use unsuitable pulleys or accessories concerned.

Don't use unsuitable rope in construction, strength or having any defects.

Pay attention to the grounding, it provides a path of least resistance for electric current to reduce

the risk of shock.

Check the winch for smooth operation without load before loading operation.

Make sure the wire rope to be wound evenly in the first layer on the drum, rewind it if a mixed

windings in existence.

If a wire rope is found an uneven winding or accumulated at one side of the drum, align it adequately.

1. The winch is not to be used to lift, support or otherwise transport personnel.

2. A minimum of five (5) wraps of rope around the drum is necessary to support the load rated.

3. The owner and/or the operator shall have an understanding of these operating instructions and the

warning before operating the electrical winch. Failure to follow these warnings may result in loss of

load, damage to the winch, property damage, personal, or fatal injury.

4. The owner shall retain this manual for further reference to important warnings, installation, operating

and maintenance instructions.

WARNING

！

I.Installation Precaution

General Safety Precaution

● Low temperature below -10℃ ,high

temperature above 40℃ or humidity

above 90% conditions

※Cause malfunction of spare parts ※Cause explosion

● In heavy acid or salty conditions

● In rain or snow conditions

● In a heavy general powder

※Cause malfunction of performances

● In an organic chemistry or explosive

powder conditions

※Cause malfunction of spare parts

※Cause rust or short circuit

！DANGER

The following environmental conditions may result in the possible causes of hoist trouble.

II. Handing Precautions

● It is forbidden to lift loads above

the rated capacity of the winch

● Do connect the power lead on the

main power source directly and

fasten them

● Ban on transporting persons ● Don’t ignore fault accessories

● Don’t stand under winching

operation

● Don’t operate hoist in rain or snow

● Do perform maintenance on

schedule

● Do anchor crane with ballasted

container and wire rope

III. Winching Principles

Percentage Duty Cycle

Load Rated

The life of the winch is depending on the conditions of the load and working frequency.

In the long time operation, make sure to use the machine within its continuous ratings.

Continuous ratings means the percentage duty cycle (%ED) is subject to the rated voltage,

rated frequency and a 63% of rated load.

Percentage duty cycle (%ED)＝ X 100 (%)

Tb: total sum of overall loadings operating hours.

Ts: total sum of stopping hours.

Tb + Ts = approximately 1 to 10 minutes.

For this reason, all electric winches are rated at a 25% percentage duty cycle (%ED).

Load and speed vary according to how

much wire rope is on the drum. The first layer

of rope on the drum delivers the slowest speed

and the maximum load. A full drum delivers the

maximum speed and the minimum load. For this

reason, all electric winches are rated at their

top layer of wire rope on the drum.

Calculating Head Loads

Use a tackle block for double fall operation to increase the rated load by approximately

85% but its speed will be deducted by half accordingly.

P: Rope tension

η: Sheave efficient

θ: Angle

W: Load

μ: Friction factor

！WARNING

Never hoist over the rated percentage duty cycle.

First layer (Min.speed Max.load)

Half layer (Med.speed Med.load)

Top layer (Max.speed Min.load)

Flange of drum

P= W

2η

P= W

4η

WP= W

μ.

P= Wμ.. sinθ +W.cosθ

Tb + Ts

Calculating Fleet Angle

● The winch should be mounted as close to centre

and as perpendicular as possible to the direction

of the line pull. This will keep the wire rope fleet

angle centre on the drum as small as possible.

● If the proper fleet angle is not maintained, the wire

rope could wind onto one side of the drum.

Experience has shown that the best wire rope service is obtained if the maximum fleet angle

is not more than 1.5° for smooth drum and 2° for grooved drum.

For example, the correct distance varies according to drum length.

D/d Ratio

It means ratio of pitch circle diameter of drum to the rope diameter.

In principle, a 12:1 D/d ratio is suggested for most pulling application and a 15:1 D/d ratio for

lifting and lowering applications. For example, a CP-200 comes with a 94 mm dia. drum and

a 6 mm x 30 m wire rope, therefore its D/d ratio is calculated as follow.

D/d ratio = ( 94 + 6 mm ) / 6 mm = 16.67 times

Rope Safety Factor

The working coefficient of the wire rope shall be determined from the ratio of the minimum

breaking force of the rope and the maximum possible lifting capacity.

In principle, a 3.5 times of rope safety factor is suitable for most pulling applications and a 5

times for lifting and lowering applications. For example, a CP-200 comes with a 6 mm x 30 m

wire rope with 2,010 kg minimum breaking force, therefore its rope safety factor is calculated

as follow.

Rope safety factor = 2,010 kg / 200 kg = 10 times

Correct Distance

Drum Length

Fleet Angle

Model CP-200/250/300,

CWG-30075 CP-500/500T CWG-10077 CWG-10151/30151,

CP-750T/900T

Drum Length 110 mm 220mm 150 mm 240 mm

Correct

Distance

2.09 m

at least

4.18 m

at least

2.85 m

at least

4.56 m

at least

Model CWG-30375 CWG-30565 CWG-30750 CWG-31500 CWG-34000

Drum Length 230 mm 312 mm 312 mm 405 mm 680 mm

Correct

Distance

2.09 m

at least

5.92 m

at least

5.92 m

at least

7.7 m

at least

12.92 m

at least

IV. Compliance with EU Directives

Electric Winches shall comply with the following regulations

1. European Standards of EN 14492-1 for Power Driven Winches came to effect from 29th.

December 2009

2. European Machinery Directive 2006/42/EC.

3. European Directive on Electromagnetic Compatibility ( EMC ) 2004/108/EC

4. European Low Voltage Directive ( LVD ) 2006/95/EC

To comply with EN 14492-1, the following optional accessories must be fitted

to all winches

•Low voltage control •Rope drum cover

•Remote control w/ an emergency stop button •Up and down limits protection devices

When using and installing a winch, the owner or end user shall ensure that all legal requirements

are completely complied with.

Extracts from the Directives

1. EN 14492-1 Section 5.15.6 Wire Rope

Wire rope minimum break to be twice winch rating

2. EN 14492-1 Section 5.7.2 Rope Drum

Rope drum mean diameter to be 10 times the diameter of the wire rope and the flanged

drum end plates shall protrude beyond the rope wound on the drum at the top layer by at

least 1.5 x the nominal rope diameter.

3. EN 14492-1 Section 5.7.6 Rope Fastening onto the rope drum

Rope attachment to withstand 2.5 times the winch rating

Rope must have at least two wraps winding before fixing point

4. EN 14492-1 Section 5.15.5 Brake

Winch to hold full rated load

5. EN 14492-1 Section 5.15.2 Rated Capacity Limiters

Winch for lifting and lowering purpose with a rated capacity of 1,000 kg or more shall be

fitted with a rated capacity limiter to prevent overloading of the winch

10:1 D/d ratio

at least 5 wraps

fixing point

freeboard >1.5d

V. Working Method

Power Lead and Switch Cord Sections

Pendant Switch Selections

Low Voltage Control Selections

Remarks: 1.＊means standard version on delivery.

2. Switch PB-331 and PB-306 are equipped with an emergency stop function.

3. The selections of LV-320 and LV-360 vary according to winch model and power source.

4. The length of power lead is subject to the distance less than 20 meters.

5. The length of switch cord is subject to the distance less than 20 meters.

6. For any other cases, please use a bigger section of power lead or switch cord.

Remarks: 1.＊means standard version on delivery.

Winch Model Power Lead

Remote Control

Low

Voltage

Control

Direct Control Indirect Control

W/Switch

CPB-213

W/Switch

PB-331

W/Switch

CPB-161

W/Switch

PB-306

LV-320 or

LV-360

CP-200/250/300 1.5 mm

1.25 mm

2.0 mm

1.25 mm

CP-500 3.5 mm

3.5 mm

1.25 mm

CP-500T 3.5 mm

3.5 mm

1.25 mm

CP-750T 3.5 mm

1.25mm

1.25 mm

CP-900T 3.5 mm

1.25 mm

CWG-10077 3.5 mm

3.5 mm

1.25 mm

CWG-30075 3.5 mm

1.25 mm

2.0 mm2 1.25 mm

CWG-10151 5.5 mm

3.5 mm

1.25 mm

CWG-30151 3.5 mm

2.0 mm

1.25 mm

CWG

CWG-34000

-30375/30565/

30750/31500 5.5 mm

1.25mm

1.25 mm

8.0 mm

1.25mm

1.25 mm

Switch Type Direct Control Indirect Control

*CPB-213 PB-331 *CPB-161 PB-306

Rated Amp. 30 A 30 A 3 A 3 A

Contacts 3a 3a + Emergency

Stop ( 1a1b) 2a 2a + Emergency

Stop ( 1a1b)

Applicable

Winches

CP-200/250/300/500/500T,

CWG-10077/10151/30075/30151

CP-750T/900T, CWG-30375/30565

CWG-30750/31500/34000

Type LV-320, Plastic Cover LV-360, Steel Cover

IP Grade IP55, Comes with magnetic switch,

relay and transformer

IP44, Comes with magnetic switch,

relay and transformer

Ratings 5 kw 7.5 kw 7.5 kw 15 kw

Applicable

Winches

CWG-30375,

CP-750T/900T

CWG-30565/30750

31500,380-440V

CWG-30565/30750

31500,220V

CWG-34000

＊LV-320

＊LV-320 or

LV-360

＊LV-360

Andere Handbücher für CP-200

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Comeup Winde Handbücher

Comeup

Comeup CWS-230 Bedienungsanleitung

Comeup

Comeup Baby Winch CWS-300 Bedienungsanleitung

Comeup

Comeup CWG-500TH Bedienungsanleitung

Comeup

Comeup Seal Gen2 12.5rs Bedienungsanleitung

Comeup

Comeup Baby Winch CWS-300 Bedienungsanleitung

Comeup

Comeup Cub 4s Bedienungsanleitung

Comeup

Comeup Cub 4s Bedienungsanleitung

Comeup

Comeup CWG-30075 Bedienungsanleitung

Comeup

Comeup GIO 100s Bedienungsanleitung

Comeup

Comeup CWG-30750 Bedienungsanleitung

Comeup

Comeup DV-15 Bedienungsanleitung

Comeup

Comeup CWS-80 Bedienungsanleitung

Comeup

Comeup GTD-650 Bedienungsanleitung

Comeup

Comeup Rhino 12 Bedienungsanleitung

Comeup

Comeup HV-15 Bedienungsanleitung

Comeup

Comeup CWS-80 Bedienungsanleitung

Comeup

Comeup Baby Winch CWS-300 Bedienungsanleitung

Comeup

Comeup GTD-800 Bedienungsanleitung

Comeup

Comeup Rhino 12 Pro Bedienungsanleitung

Comeup

Comeup CP-750T Bedienungsanleitung

Comeup

Comeup CWS-80 Bedienungsanleitung

Comeup

Comeup CP-300 Bedienungsanleitung

Comeup

Comeup Seal Gen2 9.5 Bedienungsanleitung

Comeup

Comeup CWG-31500 Bedienungsanleitung

Beliebte Winde Handbücher anderer Marken

WARRIOR

WARRIOR Trojan 40PUS12 Kurzanleitung

SVERO

SVERO 16 Bedienungsanleitung

Warrior Winches

Warrior Winches C10000NH Bedienungsanleitung

Badland Winches

Badland Winches 68146 Bedienungsanleitung

Bush

Bush II Series Bedienungsanleitung

Badland

Badland APEX 5500 Bedienungsanleitung

Quadratec

Quadratec Q9000 Synthetic Handbuch

C-Max

C-Max VIGO Bedienungsanleitung

Orvea

Orvea Italwinch 805 Bedienungsanleitung

Prowinch

Prowinch PWJTHF300 Bedienungsanleitung

Clas Ohlson

Clas Ohlson LD2000-A Bedienungsanleitung

Topex

Topex 97X080 Bedienungsanleitung

Eastbound

Eastbound MotoWinch 1707001 Bedienungsanleitung

Runva

Runva EWD8000 Kurzanleitung

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Installationsanleitung

Granit

Granit 11157675 Bedienungsanleitung

TREX

TREX TB75 Bedienungsanleitung

Badland

Badland ZXR 2500 Bedienungsanleitung